Availability
Showing In Stock Items. Show All 50 Items.
These heavy-duty Summit Racing™ balancer bolts are the best way to bolt on your damper. As the crankshaft flexes and twists, the damper absorbs a lot of kinetic energy. To ensure that the damper stays on tight, these bolts include a thicker flat washer, machined perfectly flat to spread the fastening load over a greater surface area. They're manufactured from premium materials for maximum strength and feature a quality finish for good looks.
( 116 )
$19.99
Lares makes all types of steering components, including hard-to-find items like these pitman arm fittings. They're machined from high-quality materials and provide the exact fit and performance as your original fasteners. Whether you're looking for pitman am hardware or other steering components, Lares will help you with your needs.
( 6 )
$7.99
RESTOPARTS® Manufactured body molding clips are an absolute must to properly install the molding for your rear windows, tailgates, and rocker panels. These complete kits include all of the exact plastic, steel, and springboard steel pincer clips with all of the right contours and mounting tabs for precise mounting. Replacing the molding on your vehicle is a snap with reproduction body molding clips from RESTOPARTS®; order the style recommended for your application.
( 8 )
$12.99
—
$42.99
RESTOPARTS® Manufactured door panel installation kits have everything you need to secure your vehicle's interior restoration. These complete kits supply you with original style screws, correctly reproduced stainless steel washers, and clips to fasten your classic door panels with an air of authenticity. Pair your panels with the perfect hardware partners to reinstate their genuine appeal—RESTOPARTS® Manufactured door panel installation kits.
( 8 )
$16.99
OER power steering pump stud and bolt kits are replacement hardware for Saginaw power steering pumps. The sets are available un-plated or chrome plated to use with painted or chromed reservoirs. OER stud and bolt kits will include two studs and one bolt. They're available for applications from the 1930s thru the 1970s.
( 9 )
$9.99
Moroso header bolts are much stronger than stock and will last under even the most severe conditions. They are constructed of Grade 8 material, feature a black oxide finish, and standard hex head for easy installation.
( 13 )
$21.99
Check-out the vast selection of trim screws Summit Racing™ has to offer for your current or next job or project. From Phillips oval head tap screws to trim panel fasteners, you're sure to find the correct fit with this quality hardware that offers original equipment quality at an affordable price.
Not Yet Reviewed
$8.99
Washers evenly distribute the load of a threaded fastener and without them you won't get the correct head bolt tension. Pioneer head bolt washers offer an exact fit without compromise. These quality made washers feature hardened steel construction and a black oxide finish. Choose quality and value to complement your head bolts with Pioneer washers.
( 2 )
$17.99
RESTOPARTS® Manufactured has reproduced headlight bezel hardware kits to exact GM specifications to offer the best fit and function for your GM vehicle. These headlight bezel GM hardware kits come with the components needed to offer up a great installation.
Not Yet Reviewed
$10.99
RESTOPARTS® Supplied trim molding screw kits are authentic--and specific--reproductions used to attach finishing pieces around windows, wheel opening. When you're taking the time to meticulously restore a classic car, you don't want cheesy looking fasteners holding it all together. The screws fit snugly and are awesome complements, themselves, to the actual trim molding.
( 6 )
$21.99
—
$25.99
Trim tags tell a lot about your vehicle from where and when it was built to how it was fitted out. RESTOPARTS® Supplied trim tag rivets are a match to factory equipment and conveniently sold in pairs to easily secure your vehicle's trim tag. These replacement body trim tag rivets are made from aluminum.
( 1 )
$16.99
OER Authorized door latch mechanism screw kits are the correct Phillips head screws for the specific vehicles listed. These stainless steel screws are OER Authorized products manufactured to standards that meet or exceed the quality of original equipment, and are backed by OER to fit and function properly.
Not Yet Reviewed
$12.99
Pioneer has the most complete coverage of early and late model replacement cylinder head fasteners. These bolts are manufactured to meet or exceed OEM specifications. Torque-to-yield fasteners on many late-model applications must be replaced to avoid premature head gasket failure. Order the hardware set recommended for your application.
( 15 )
$39.99
—
$47.99
Summit Bucks
ACDelco brake bleeder screws are GM-recommended replacement parts for your original equipment. These caliper bleeder valves are manufactured from quality materials and provide the same performance, durability, and service life you expect. They're available for a variety of year/make/model applications. Clear your brake fluid of air with genuine ACDelco brake bleeder screws.
( 3 )
$1.99
—
$2.99
For a simple yet effective solution for protecting and organizing your vehicle's wiring, use OER Authorized front fender wiring harness straps. The front fender wiring harness straps are designed to secure the wiring harnesses in the fender well of various vehicles, especially classic and muscle cars. These straps safeguard wiring harnesses, including those connected to the alternator/generator, from falling into the open area between the engine and the fender well. This helps prevent potential damage from heat exposure, abrasion, or entanglement with moving parts like a hot exhaust manifold. OER Authorized automotive parts are manufactured to replicate the appearance, quality, and fit of original equipment components, making them ideal for your restoration project.
( 1 )
$5.99
Replace your old or worn-out connecting rod nuts with these OEM replacements from Pioneer, Inc. You can count on Pioneer for the replacement hardware that you need.
Not Yet Reviewed
$17.99
RESTOPARTS® Supplied taillight lens screws are made of durable stainless steel to resist rust. Each fastener features a correct head, extended shank and threads for an authentic fit and appearance. The screws are available in a variety of underhead lengths.
Not Yet Reviewed
$3.99
—
$4.99
OER has a brilliant idea when it comes to fastening the grille on your classic Chevrolet. The factory would have used rivets, which are difficult to install—so OER designed the rivet bolt and nuts sets to make installation easy. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and bolt when installing the grille. Each set comes with 10-24 x 3/8 in. rivet head bolts, lock washers, and nuts. These bolt sets come in anodized silver or EDP coated black.
( 2 )
$2.99
Dorman engine connecting rod nuts are machined to strict engineering quality standards. They're designed for high corrosion resistance and are suitable for a range of applications. Order the fasteners needed for your project!
( 3 )
$15.99
Engine Works offers several options of intake manifold bolts to purchase exactly what you need for small block or big block engine. The bolts are available in different sizes and finishes, with or without washers, and in different quantities. Choose the 12-point intake bolts in the size, quantity, and finish you need.
Not Yet Reviewed
$21.86
Big-time clamping force for your connecting rods! Manley replacement connecting rod bolts feature a .0005 to .0070 in. interference fit to guarantee rod cap alignment and actually strengthen the connecting rod. They are available in ARP2000 alloy with an 8740 chromoly steel. Nuts and lubricant are included.
( 5 )
$203.41
Are you planning a third member assembly upgrade? Yukon Gear & Axle has just what you need, including third member washers. These quality washers are designed for fastening the third member assembly to the rear-end case. When it comes to rear axle technology, Yukon Gear & Axle is the only way to go!
( 1 )
$9.99
Motive Gear offers differential cross shaft lock pins for a variety of diff case design types—including AMC 20, Chrysler 8.75, Dana 35, Ford 8 and 9. Order the fasteners recommended for your axle application.
Not Yet Reviewed
$3.99
Pioneer cylinder head bolt washers are exact fit, no-compromise replacements. These steel fasteners are available in sets of different quantities and individually.
Not Yet Reviewed
$29.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
