Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
1957 FORD RANCHERO Parts and Accessories
Showing In Stock Items. Show All 181 Items.
PerTronix Ignitor® Solid-State Ignition Systems
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1007 )
$109.56
—
$161.93
Derale 9000 Series Fin and Plate Transmission Coolers
Derale 9000 Series fin and plate transmission coolers are designed with 1 1/4 in. wide turbulator plates to maximize cooling and minimize pressure drops. They also feature sturdy furnace-brazed aluminum construction. Outstanding protection for your vehicle's key components--that's the job of Derale Performance!
( 77 )
$128.46
Spicer Drivetrain Products Differential Cover Kits
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 106 )
$165.99
PerTronix Ignitor II® Solid-State Ignition Systems
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 295 )
$174.37
—
$189.92
Edelbrock Performer RPM Street Fuel Pumps
Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design improves flow quantity and quality—and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Performer RPM street fuel pumps produce 6 psi and do not require a regulator; and the clockable lower housing can be rotated for the best inlet and outlet alignment. They're designed for use with gasoline only.
( 437 )
$190.95
Ford Performance Parts Oil Filter Adapters
Have you ever wondered where you were going to put your oil filter? Doesn't it always seem to be in the way of other accessories? Not anymore with these handy Ford Performance Parts oil filter adapters. They simply screw into the block and rotate the filter toward the front of the engine to provide clearance for engine swaps and chassis modifications. The adapters are available in different models for use with over a thousand applications.
( 21 )
$154.99
Fel-Pro Engine Gasket Kits
Fel-Pro engine gasket kits include the seals needed for a complete rebuild, all in one convenient and affordable package. Each kit features the premium-quality gaskets required for your specific engine—from head, intake, and exhaust gaskets … to valve cover, fuel and water pump gaskets, and many more. These sets are available for thousands of vehicle applications. Match your year/make/model to the Fel-Pro engine gasket kit designed for precise fitment.
( 569 )
$120.99
—
$128.99
Powermaster PowerMax Plus Starters
Powermaster PowerMax Plus starters are rated with high cranking torque and feature an offset gear reduction for increased performance. Their mounting blocks are made from durable billet aluminum and can be rotated in four positions to fit multiple locations. PowerMax Plus starters are available in either a natural or chrome finish and contain a tested dyno report in every box!
( 1146 )
$230.99
On Sale
Summit Racing™ Power Brake Boosters
A Summit Racing™ power brake booster is the perfect addition to your street rod or custom application. The boosters use vacuum from the engine, or a standalone pump, to assist in slowing down the vehicle as you depress the brakes. This makes the brake pedal much easier to press and improves the braking response of the vehicle. These power brake boosters are available in multiple diameters, in single or dual-diaphragm designs to best fit your application. Choose between the brake booster only; or the brake booster and brake pedal rod extension kit, which makes installation even easier.
( 101 )
$182.99
Summit Racing™ Oil Filter Adapters
Our Summit Racing™ oil filter adapters are perfect for securing an oil filter to your engine block when rebuilding or replacing an engine. These adapters bolt right up or thread into your engine block and allow for a spin-on cartridge oil filter.
( 8 )
$118.99
Derale Stacked Plate Fluid Coolers
Derale stacked plate fluid coolers have more surface area than tube and fin coolers, giving you more efficient heat extraction. The units feature embossed turbulator plates and durable, brazed aluminum construction. They are equipped with AN male ports and are also available with an OEM-spec, high-temperature oil hose with swedged hose ends. Derale Performance coolers have pre-drilled mounting brackets and include hardware where noted.
( 113 )
$139.88
—
$221.74
Derale Engine Oil Filter Relocation Kits
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 40 )
$112.40
PerTronix Ignitor III® Solid-State Ignition Systems
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 84 )
$196.94
Trans-Dapt Performance Remote Oil Filter Relocation Kits
Trans-Dapt Performance remote oil filter relocation kits allow you to move your oil filter to a more accessible location, making filter changes quick and easy. They're available in single or dual filter kits. Dual filter kits double the filtration of your oil system to keep oil cleaner and add an extra quart of oil capacity.
( 79 )
$122.99
Powermaster Truck Alternators
These truck alternators from Powermaster supply your truck with the charging power that it needs. They're available in a variety of amperages and finishes to suit your rig's needs. From off-road mudslingers to custom show trucks, no matter what make and model you have, Powermaster has an alternator that's tailor-made for you.
( 17 )
$198.99
On Sale
Earl's Performance Oil Cooler Adapters
Earl's Performance oil cooler adapters replace the OEM oil filter housing. These oil filter bypass adapters allow for the installation of a remote oil filter and optional oil cooler. Their billet construction is black anodized and stainless hardware is included. They use O-ring seals for a leak-free installation.
( 15 )
$157.95
Lokar Billet Window Cranks
Roll your window up and down in style with these Lokar billet window cranks. They are machined from billet aluminum and come available in your choice of brushed or polished finishes. The handles feature a full 360 degree fine spline adjustment system, so there are no screws or visible attachment hardware. Available for most GM and Ford applications, the Lokar billet window cranks will match up excellently with your other Lokar interior accessories.
( 20 )
$134.95
Motive Gear Ring and Pinion Sets
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 287 )
$139.99
—
$220.37
Manufacturer Rebate
BFGoodrich Radial T/A Tires
BFGoodrich Radial T/A tires feature unique tread block phasing, which permits high performance with low road noise levels. Other features include g-Wedge sidewall stabilizers to improve lateral stability and steering response, a new tread compound with variable groove angle geometry to yield better wet and dry traction and control, and polyester/steel/nylon construction for maximum carcass strength. Plus, Radial T/A tires offer the consumer the choice of white lettering on one sidewall and black on the other, to complement the look of any vehicle. They're S-speed rated up to 112 mph.
( 226 )
$196.99
Hays Heavy-Duty Flexplates
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$204.95
U.S. Wheel 51 Series Paint-Ready Smoothie Wheels
U.S. Wheel 51 Series paint-ready Smoothie wheels are available in a variety of diameters, widths, bolt patterns, backspacing, offsets, center bores, and load ratings. They feature smooth, seamless 2-piece steel construction in silver or bare finish which you can paint or powdercoat to accent or match your ride.
( 18 )
$126.99
—
$149.99
Cragar Chrome Smoothie Wheels
These Chrome Smoothie wheels will turn heads at the cruise-in and on the road with their classic good looks. Their smooth, nostalgic style is a perfect choice for your hot rod.
( 214 )
$160.43
—
$176.46
Lokar Interior Door Handles
These Lokar interior door handles are made for street rods or other vehicles that need a finished-off look. They are made of billet aluminum and have a smooth, flat, rounded shape. All mounting hardware and instructions are included.
( 18 )
$134.95
American Racing VN515 Polished Torq-Thrust II One-Piece Wheels
If you like American Racing's famous Torq-Thrust D wheels, then you'll love these VN515 Torq-Thrust II one-piece wheels! They feature a fully polished, gorgeous finish and the same vintage 5-spoke design as the Torq-Thrust D wheels. For classic style, quality construction, and a beautiful fit, choose American Racing VN515 Torq-Thrust II one-piece wheels.
( 451 )
$197.00
—
$202.00
