Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
1957 CHEVROLET Parts and Accessories
Vintage Air Gen-V SureFit Systems Complete Kits
Vintage Air Gen-V SureFit Systems complete kits are powerful and intelligent climate control systems. Available for vehicles with or without factory air, they use an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V SureFit Systems feature variable blower speed and dash/floor/defrost blend. They will include everything in an evaporator kit, plus all underhood components, such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and installation instructions. Additional features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection-molded case for optimal precision, strength, and quality * Injection-molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower * Bolt-in replacement control panel
( 8 )
$2,329.99
—
$2,832.99
Champ Pans Fabricated Aluminum Valve Covers
Champ Pans fabricated aluminum valve covers bring a no-nonsense, old-school approach to small block engine modification. These valve covers feature a natural finish with no unnecessary decorations and are available for most domestic small block performance engines, left or right side. Order the model recommended for your engine application—then pop the hood and show that you mean business with Champ Pans fabricated aluminum valve covers!
( 3 )
$255.71
—
$279.27
RAM Truck Pulling Custom Order Clutch Kits
RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.
( 2 )
$1,849.99
—
$2,299.99
ATI Crank Trigger Shells
ATI now offers a custom crank trigger shell option, eliminating an additional pulley being bolted to your damper. If you already own an ATI Super Damper, you can just change the outer shell to the trigger. ATI can place any number of magnets in the outer shell at whatever degree marks you wish. These aluminum crank trigger shells will work with "Flying Magnet" pickups and other trigger sources. Order the model best suited for your application. Note: When placing your order, please have the desired quantity and location of magnets ready. Additional charges for extra magnets apply.
Not Yet Reviewed
$277.99
—
$300.00
ATI Super Damper Standard Harmonic Balancers
Patented ATI Super Damper standard harmonic balancers are the only crankshaft dampers designed exclusively for high performance engines. Inner and outer shells are available in aluminum or steel, and contain a steel inertia weight. The inertia weights have six (2-ring design) or eight (3-ring design) computer-machined grooves to retain the proper durometer O-rings (dyno tested for each application). Whether you race or just drive on the street, ATI harmonic balancers are the perfect choice. Features include: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * OEM equipment on a variety of crate engines * Tunable, rebuildable, and extremely efficient at all rpm * Laser-engraved 360 degree timing marks * Supercharger and power steering drive pulleys available for some applications
( 239 )
$399.95
Eddie Motorsports V-Drive V-Belt Pulley Drive Systems
Tough, shiny, beautiful, and powerful are all words that come to mind when looking into Eddie Motorsports V-Drive V-belt pulley drive systems. These multiple-component systems are constructed from billet aluminum for optimum strength, corrosion resistance, and longevity. They include an aluminum water pump, Powermaster 170 amp alternator, Gates V-belts, and all necessary stainless steel hardware. GM Type II power steering pumps and Sanden-style SD7 A/C compressors are used on units with power steering or air conditioning. Polished or clearcoated systems use polished finished components. Choose the options and fitment for your specific application—then enjoy the incredible performance, exceptional style, and tough construction of Eddie Motorsports V-Drive V-belt pulley drive systems.
( 2 )
$2,008.95
American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits
American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern
Not Yet Reviewed
$4,995.00
Manley Pro Series I-Beam Connecting Rods
Manley Pro Series I-beam connecting rods are forged from 4340 aircraft-quality vacuum degassed material. They're fully machined to produce the strongest rods possible. These rods are shot-peened to Mil specs and are 100 percent individually magnafluxed. They feature 7/16 in. ARP cap screws with 12-point heads and your choice of material grade to maximize your needed tensile strength! Manley Pro Series I-beam connecting rods are available in various sizes for a wide range of vehicles and horsepower ranges from 850 to 1,600 hp. Match up your specs, then order an individual rod or a larger set quantity.
Not Yet Reviewed
$228.43
Manley Steel H-Beam Connecting Rods
Manley steel H-beam connecting rods are made from forged 4340 steel alloy. They're packed full of performance features, such as a compact uniform-grain structure for ultimate strength, full machining, stress relieving, and magnafluxing. The wrist pin and big end bores are honed to a +/-.0002 in. tolerance, and the wrist pins get a bronze alloy bushing. These units include cap screw ARP 8740 alloy rod bolts, and each rod set is weight-matched to within 2 grams. Available individually or in a set, order the model recommended for your vehicle year/make and engine application.
( 10 )
$112.87
Howards Cams Billet Aluminum Rocker Arms
The unique full body design of these Howards Cams billet aluminum rocker arms offers less flex and will withstand 800-plus lbs. of spring pressure at over .800 in. lift. These rockers are 100 percent CNC-machined and are designed for more retainer and spring clearance than most other brands. They feature needle-bearing fulcrums and roller tips, centerless ground trunnions, centerless ground pins and rollers, and thick-walled adjusting nuts.
( 44 )
$36.99
KB Performance Pistons
KB Performance hypereutectic pistons are made from 390 aluminum alloy and heat-treated to T6 standards, which makes them 30 percent stronger than ordinary untreated hypereutectics. Their 100 percent CNC-machined crowns, high upper compression-ring location, gas-accumulator groove, drilled oil returns, and spiral-lock retainer grooves make these pistons outstanding for performance applications. They have a lightweight, rigid-rib skirt design that stabilizes the piston in the bore. All of this adds up to pistons that fit tighter than forged types, provide improved oil control, reduce blow-by, increase ring life, eliminate cold start-up knocking, and won't cost you an arm and a leg! Thousands of models are available—find the set and options designed for your vehicle and engine application.
( 137 )
$104.98
—
$117.94
Manley Tour Lite I-Beam Connecting Rods
Manley Tour Lite I-beam connecting rods combine design and finely tuned manufacturing processes to render an outstanding product. They're forged from 4340 aircraft-quality steel and are fully machined to produce the lightest, yet strongest rods possible. The Tour Lites are then shot-peened to MIL-SPEC standards and are 100 percent individually magnafluxed. ARP cap screws are included. If you're looking for robust, lightweight rods, these Manley Tour Lite I-beam connecting rods will get your engine in motion. The replacement rods are available individually and in sets.
Not Yet Reviewed
$228.43
Heidts Superide Independent Front Suspension Kits
Independent front suspension gives you twice the ride of a new 4-link dropped axle at a comparable cost. These Heidts Superide independent front suspension packages have been engineered for a correct, safe ride, while providing the ultimate stance. They feature a one-piece crossmember with upper control arms that clear the fenders, and their 56 in. hub-to-hub tread width gives you the narrow look without any tire-to-fender clearance problems. The packages include specially designed one-piece 1045 heat-treated alloy steel spindles to give you the lowest possible ride available, the high-tech appearance you want, and assurance of the right geometry, right fit, and a great ride. Nearly a hundred packages are available to fit applications from the 1920s and up. Components include: * Heidts one-piece crossmember * Superide spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, rear mounted * Billet single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$5,317.00
Optic Armor Oversized Formed Windows
Optic Armor oversized formed windows are highly scratch and chemical-resistant while being 50 to 75 percent lighter than glass. They are made from high-optical grade polycarbonate, making them virtually shatterproof, providing added durability as well as safety for the driver or operator. Products requiring a screen printed border are printed with a high-quality, permanent ink that will not flake or crack and gives the window a professional touch. Optic Armor offers many vehicle applications in a formed to factory curvature and their oversized windows allow for a cut-to-fit, flush-to-body install that is not only aerodynamic, but gives the installer the ability to create a custom look. Optic armor windows can be cleaned with standard glass cleaner.
( 7 )
$151.00
—
$270.00
COMP Cams Custom Ground Camshaft Cores
Design your perfect cam with these custom cores from COMP Cams. There is a large number of custom ground cam cores available for most any engine application, depending upon the type of cam being ground. This gives you the freedom to choose the core, lobe design, and lobe separation angle that best suit your needs. The possibilities are endless with COMP Cams!
( 4 )
$348.99
—
$548.99
Scat Pro Stock I-Beam Connecting Rods
Scat Pro-Stock I-beam connecting rods incorporate all of the best features possible for an I-beam rod, including some strength-adders found in H-beam designs. They are profiled with clearance for long stroke applications. These connecting rods feature a one-rib cap design for added strength and bearing support, and special hollow dowels with ARP cap screw bolts to greatly increase strength and horsepower capabilities.
( 60 )
$72.99
Silv-O-Lite Cast Pistons
Silv-O-Lite quality cast pistons are manufactured from cast aluminum and then machined to produce a unique diamond finish, all to exacting skirt tolerances. These OE-type pistons are heat-treated and machined for strength and durability, tighter piston-to-cylinder wall clearances, and longer piston life.
( 53 )
$48.62
—
$51.17
Classic Performance Complete Fuel Injection-Ready Tank Kits
Classic Performance complete fuel injection-ready tank kits are the most complete choice when adding a fuel injection-ready tank to your vehicle. They include an original-fit tank with built-in fuel tray, a fuel tank sending unit, and a fuel regulator/filter combined with the most comprehensive EFI fuel line kit in the market that's packaged with the fuel hoses and all the fittings to plumb from the fuel pump forward. All fuel fittings have a push-lock connect end that does not require specialty tools to disassemble. CPP tank kits also include a 255 lph in-tank pump that supports up to 600 hp, or an upgraded high-volume pump option with the proper install components. In-tank pumps are much more efficient and run much cooler than running an inline pump. Classic Performance kits contain all of the necessary pieces to mount to your vehicle for a simple upgrade install.
( 2 )
$637.99
—
$649.99
Scat Ultra Q-Lite Connecting Rods
Are you building big power? Help pull the power within your engine out with Scat Ultra Q-Lite connecting rods. These rods are light, strong, and delivered ready to install. Crafted from high-tensile 4340 forged steel, Ultra Q-Lites use special 1.4 in. ARP 7/16 in. bolts to ensure clearance--no machining or indexing is required! These connecting rods are built with doweled caps for precision alignment and are also available with a profiled clearance for stroker applications. A Formula 1 style lightening hole reduces weight even more without compromising strength. You're not settling for the original horsepower in your engine, so don't settle for just any connecting rod; choose high-quality craftsmanship--Scat Ultra Q-Lite connecting rods.
( 3 )
$105.99
Stef's Oil Pump Pickup Kits
Stef's oil pump pickup kits are available in steel and aluminum to offer all racers the obvious advantages of a single stage external oil pump system. They can also be installed as third dry sump scavenge pickups.
Not Yet Reviewed
$117.99
Lloyd LUXE Floor Mats
These Lloyd Mats LUXE floor mats feature a 1/2 in. thickness of super soft ANSO RPM continuous filament nylon yarn so soft you'll want to drive barefoot. That's more than triple the weight of most O.E. floor mats. The multi-layer backing has an extra thick urethane core providing extra cushion and insulating against heat and road noise. They're also chemically treated to resist stains, have a waterproof backing to protect the original interior, and has TractionBac non-slip natural rubber backing that keeps your mats from sliding while you drive.
Not Yet Reviewed
$83.99
Lloyd RubberTite Floor Mats
These Lloyd Mats RubberTite floor mats have hundreds of wells to hold water, snow, mud, sand and spills. The rounded well walls are designed for ease of cleaning; just hose-off the mats and clean. They feature a non-slip surface with a heavy-weight rubber construction that keeps them flexible even in sub-freezing temperatures. They also have a rubber nib backing that holds the floor mats in place while driving.
Not Yet Reviewed
$54.90
Carrillo Pro-H Tapered H-Beam Connecting Rods
Choose the right connections--Carrillo Pro-H connecting rods. Able to handle extreme engine loads, their tapered H-beams allow for some weight savings on the reciprocation end and give increased clearance for fully boxed pistons. Obsessed with perfection, Carrillo produces their Pro-H connecting rods in small batches. They mesh quality materials, precision forging, excellent craftsmanship, and high-tech designs to deliver a flawless performance for your race engine. Applications are available for many venues of motorsports. Add the high performance "choice connection" to your race machine--Carrillo Pro-H tapered H-beam connecting rods.
Not Yet Reviewed
$2,919.04
Classic Performance IFS Front Suspension Packages
Classic Performance IFS front suspension packages are designed to convert the entire front suspension of your classic car. You can now enjoy the smooth ride and handling of independent suspension, while lowering the ride height of your vehicle. Order the package recommended for your vintage application. Features include: * New crossmember * Tubular upper and lower control arms with polyurethane bushings * Manual rack and pinion with tie rod ends * Coil springs (some kits may include adjustable billet coilovers with springs) * Heavy-duty forged steel spindles * Brake calipers and rotors
( 7 )
$1,920.99
