Availability
Clearance
Eliminate the sloppy "play" in your steering with Danchuk tie rod ends. These OE replacements fit a variety of classic vehicles dating back to the 1950s. They're available for both inner and outer positions—and since the tie rod ends are greasable, friction is reduced and contaminants are kept out.
( 2 )
$46.79
$29.50
Clearance
Lares remanufactured steering gears make the perfect replacement for your original equipment needs. These power steering gears are thoroughly cleaned and all exterior surfaces get reconditioned for a fresh like-new appearance. All units receive new OE-equivalent seals and O-rings, then each unit is tested to ensure proper performance. Lares also lubricates each steering gear unit, and applies a fresh coat of high-quality paint, so they come ready to install them and go! Verify the fitment and order the Lares remanufactured steering gear unit designed to fit your application.
( 58 )
$483.99
$400.50
Summit Bucks
Clearance
Using ACDelco Gold control arm bushings will provide you with a performance advantage. They offer metal/rubber and rubber designs to fit a wide range of applications for budget-conscience consumers. ACDelco bushings feature temperature and fatigue resistance for long service life. Plus, their design supports proper alignment, stability, and durability.
( 4 )
$26.99
$17.50
Summit Bucks
Clearance
Monroe Gas-Magnum shocks provide firm control without a harsh ride by using up to twice the fluid capacity of standard 1 in. bore shocks. This all-weather fluid contains special modifiers to reduce friction and ensure smooth rod reaction. The shocks also feature full displaced valving for better range on both the compression and extension cycles, ensuring a comfortable ride. These shocks use a sintered iron piston, which is stronger than traditional metals, to enhance durability for longer service life. Each unit is nitrogen gas-charged for improved ride and handling; reduced aeration helps to maintain tire-to-road contact. Their large 2 in. reserve tube allows for more fluid-producing consistent performance, while their 1 3/8 in. bore offers more lowering pressure than conventional 1 in. bore shocks. Monroe Gas-Magnum shocks are finished off with a 5/8 in. heavy-duty nitrocarburized rod and a special self-lubricating fluid seal to retain gas without excessive wear or friction.
( 114 )
$29.99
$19.50
Clearance
When swapping out the engine in your hot rod, you need motor mounts and inserts that you can count on. Trans-Dapt has done all of the work for you in making these engine swap motor mounts. The units are available for a variety of mounting styles, and they're made with quality materials, such as rubber, steel, and polyurethane. These motor mounts are designed for specific vehicle and/or engine applications, so you can be assured of a perfect fit and great performance.
( 351 )
$125.99
$69.50
On Sale
Clearance
Yukon Gear & Axle spindle nuts are factory-style replacements for your axle. They're available individually or in a kit to service a variety of specific axle applications.
( 7 )
$28.99
—
$33.99
$15.50
—
$18.50
Clearance
Dorman spindle nut washers are coated for high corrosion resistance and a long service life. Depending on the application, they are also available in kits that include the nut, washer, and retainer. Features include: * Direct replacement for a proper fit every time * Conveniently available in packs of different quantities * Durable steel construction * Designed and constructed to strict engineering quality standards
( 4 )
$10.99
$6.50
Clearance
TRW replacement sway bar end links are direct replacement parts for your steering system. They are manufactured from quality materials for strength and durability. With over 100 years of steering component manufacturing experience, TRW will get your vehicle safely back on the road.
( 11 )
$7.99
$6.50
Clearance
SPC performance control arm ball joint plates are designed to work perfectly with SPC control arm components. These control arm plates are available in a variety of configurations to fit your needs.
( 2 )
$72.99
$45.50
Clearance
The Right Stuff spindles come in a range of applications to fit your suspension with 1045 forged steel. The spindles are precision CNC-machined to ensure a factory style fit to provide top-notch performance.
( 72 )
$609.99
$390.50
Clearance
Scott's Hot Rods 4-bar rear suspension kits have a simple design, but will greatly improve the ride quality and handling of your hot rod or custom. These truly equal length parallel 4-bars use a very long, perpendicular panhard bar to maximize efficiency and reduce lateral movement. Both user-friendly and fully adjustable, the kits also use their CNC-machined and tapped stainless steel rod ends with right-hand or left-hand thread, allowing you to adjust the pinion angle and setup without unbolting the link bars. And unlike a Triangulated 4-link system, the pinon angle does not change throughout the travel of the suspension. The kits are offered with coilovers or airbags. Your rear suspension is just as important as the front to the ride and handling of your car; install a Scott's Hot Rods 4-bar rear suspension kit and increase your driving pleasure. Additional notes and what's included: * CNC-machined 1 1/8 in. x 1/4 in. wall DOM tubing link and panhard bars (adjustable RH- and LH-thread) * Scott's utilize a bar as long as possible per vehicle application to ensure the least amount of lateral movement * CNC-machined stainless steel rod ends--RH- and LH-thread * FK Bearing heim joints--RH- and LH-thread * Aldan American single-adjustable coilovers or Firestone 9000 tapered air springs * Coilovers are the most popular for everyday cruisers * Airbag kits are for those who want to lay their vehicle on the ground * Upper shock crossmember is standard on all kits allowing you to determine final ride height when installing * Rear-end housing brackets * Front frame brackets * 5/8 in. Grade 8 hardware * Lifetime guarantee
( 4 )
$4,294.99
$2,935.50
Clearance
Classic Performance control arm bushing kits include upper and lower bushings and plastic spacers. These kits are available in POLYPLUS or OEM style rubber.
Not Yet Reviewed
$61.99
$47.50
Clearance
Classic Performance C-notch kits will allow you to get the maximum amount of suspension drop for the rear frame of your vehicle. The "brackets" are manufactured from thick, durable steel, so you can modify and weld them into place where necessary. C-notch kits include mounting hardware and instructions, and may require some cutting and drilling to complete the installation.
( 40 )
$88.99
$67.50
Clearance
If you're looking for great quality Mevotech Supreme tie rod ends are for you! Put through rigorous testing beyond any normal conditions; Mevotech parts are highly durable even in the most extreme weather. The corrosion-resistant coating helps protect against water and road salt. Mevotech Supreme products are greasable and designed with special grease channels that allow for smoother rotation and improved grease flow, meaning less wear and tear on ball studs and bearings, and leading to a significantly increased serviceable life. Select the model that you need.
( 43 )
$18.99
$9.50
Clearance
Centric C-Tek Premium tie rod ends are precision-engineered to restore your car's original steering characteristics. Each replacement tie rod end starts with a forged steel body for increased strength, topped off with a cold-formed, heat-treated stud and ball for superior strength and durability. Add peace of mind to your steering system with Centric C-Tek Premium tie rod ends, available in configurations for virtually any vehicle on the road today.
Not Yet Reviewed
$30.99
$9.50
Clearance
If you have a Jeep, you need OMIX-ADA! Their leaf spring shackles are rugged, quality-made OE replacements to keep you rolling over your terrain of choice safely. OMIX-ADA offers left hand shackle thread, right hand shackle thread, and unthreaded styles to meet your needs. These factory-style shackles may include seals, retainers, fittings, and shackle bushings. You're driving the toughest 4-letter word on wheels--make sure that you buy replacement parts to match. OMIX-ADA leaf spring shackles are the ones that you need.
( 18 )
$19.99
$11.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
