Availability
OER brake light switches are reproductions with an original equipment fit. Activated by the brake pedal arm, these switches cause the rear lamps to illuminate when you apply the brakes. Keep your stopping lights operational with the correct replacement switches from OER, available for countless applications spanning a half-century.
( 9 )
$6.99
OER rear axle/transmission ventilators are reproductions of the original equipment used by GM on a multitude of applications from the 1950s through today. These differential vents can be utilized for rear axle housing, automatic transmissions, the front transfer case of 4x4 models, and fuel tank evaporator canisters that have a 3/8 in. hole for a ventilator.
( 22 )
$6.99
OER offers spark plug wire retainers in several styles for countless applications from the 1950s and up. These reproduction wire retainers are designed to exact OE specifications to provide a perfect fit and finish every time. Unsecured spark plug wires not only look bad, they can easily be damaged by exhaust manifolds or headers—leading to performance problems and unnecessary repairs. Order a new set of OER spark plug wire retainers and give your engine bay a fresh new look at low cost.
( 7 )
$8.99
—
$9.99
OER Authorized interior door and window crank handle C-clips meet or exceed stringent OER quality standards. Made from quality materials, these retainers hold the handles onto the door mechanism or window regulator shaft, and are for applications without power windows. The C-clips are available individually or in a set of 10. Select the quantity needed.
( 7 )
$1.99
Have you been experiencing too much side to side movement and pedal binding at the pivot? OER brake and clutch pedal pivot bushings are designed to protect from abrasion. The split nylon flange bushings are manufactured to original specifications down to the smallest detail. OER brake and clutch pedal parts are application-specific and made to fit without modifications.
( 17 )
$7.99
OER power steering pump stud and bolt kits are replacement hardware for Saginaw power steering pumps. The sets are available un-plated or chrome plated to use with painted or chromed reservoirs. OER stud and bolt kits will include two studs and one bolt. They're available for applications from the 1930s thru the 1970s.
( 9 )
$9.99
—
$12.99
Fuel sending unit not reading correctly? Your OE float may be damaged. OER gas tank sending unit floats are built to be period-correct with original style and construction. Get your fuel gauge working properly again with an assist from the OER gas tank sending unit floats designed to fit your application.
Not Yet Reviewed
$7.99
OER Authorized body screws are reproductions of the original hex head bolts used for installing a number of parts on the front end of various GM models. These steel bolts feature a black phosphate coating just like the originals, and they are OER Authorized parts, meaning they meet or exceed stringent OER quality control standards to provide an original fit and superior quality. These bolts are sold individually or in a money saving kit of 10 in three different lengths.
( 1 )
$1.99
OER offers the correct door lock cylinder gaskets for your classic GM ride. These original equipment reproductions are made with quality materials to duplicate the right configuration for sealing and securing your cylinder mechanism to the outer door sheet metal assembly. Replace worn gaskets with OER door lock cylinder gaskets.
( 1 )
$2.99
Keep your headlamp components properly adjusted and securely in place with OER headlight retaining ring to bucket screws. Like any small part, your old fasteners can become damaged or lost, making it a good idea to always have some extra around. These fasteners provide the proper fit, form, and function for a variety of vehicle headlamps. Order the OER headlight retaining ring to bucket screws designed to fit your application.
Not Yet Reviewed
$1.99
Eliminate the rattling and looseness of your vehicle's glove box door with OER bumpers and stoppers. They are manufactured from quality rubber to fit and perform just like the originals they are replacing. If your vehicle is missing the rubber piece or it's worn, substitute an OER glove box door arm bumper or stopper and restore a quiet, tight fit.
( 2 )
$8.99
OER Authorized gauge sending units are quality replacements for a variety of instruments and applications. These genuine reproductions are inexpensive, but invaluable data sensing devices. Order the model recommended for your classic car or truck gauge.
( 2 )
$9.99
OER offers a reproduction of the original turn signal switch cancelling cam/horn contact for tilt and non-tilt steering wheels. These replacements are manufactured to factory specifications. They're available for a broad range of classic car and truck applications, ensuring precise fit and function.
( 9 )
$11.99
For a simple yet effective solution for protecting and organizing your vehicle's wiring, use OER Authorized front fender wiring harness straps. The front fender wiring harness straps are designed to secure the wiring harnesses in the fender well of various vehicles, especially classic and muscle cars. These straps safeguard wiring harnesses, including those connected to the alternator/generator, from falling into the open area between the engine and the fender well. This helps prevent potential damage from heat exposure, abrasion, or entanglement with moving parts like a hot exhaust manifold. OER Authorized automotive parts are manufactured to replicate the appearance, quality, and fit of original equipment components, making them ideal for your restoration project.
( 1 )
$5.99
OER gas door bumpers act as a cushion, preventing the fuel filler door from directly impacting the vehicle's body, which could lead to scratches, dents, and paint damage. Protecting the fuel door and the vehicle's body from damage with these fuel filler door bumpers ensure that the car's exterior remains visually appealing and preserves its resale value. OER parts are meticulously reproduced to match the original factory specifications, often utilizing original blueprints or reverse engineering. This commitment to authenticity ensures OER parts provide the same fit, function, and aesthetic as the original equipment parts on classic cars and restoration projects.
( 1 )
$6.99
OER rear view mirror screw mounting bushings help keep your inner rear view mirror in place. These parts are reproductions of the original-style metal bushings. They can be found in the stem where the screw for the mounting bracket and your mirror meet. Order the OER rear view mirror screw mounting bushing designed for you classic restoration project.
Not Yet Reviewed
$5.99
OER convertible power top motor mounting grommets are reproductions of the original rubber mounting/insulation grommet used on various models with the optional power tops. They install on the pump assembly and secure it to the vehicle, creating a damper for noise and vibration while the pump is in operation. These grommets are made from high-quality NBR material which is resistant to oils and fuels. Order the model designed for your application.
( 1 )
$4.99
Prevent dirt and water damage with OER bellcrank pivot felt seals. These reproductions of the originals are die-cut felt seals that slip over your bellcrank pivot studs and seal against the end of the bellcrank tube. For an authentic look, original fit, and leakproof sealing, get OER bellcrank pivot felt seals.
( 4 )
$5.99
Keep your body panels protected from your hood with these OER hood bump stoppers. They are manufactured from extra-thick, durable rubber for maximum protection. The stoppers are built to factory specifications and install in the stock location for a direct fit.
( 29 )
$7.99
OER GM Restoration Parts bolts are reproductions of the original hex head bolts for various GM models. These bolts were used for the installation of a number of parts on the front end of various GM models.
Not Yet Reviewed
$7.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
