Availability
Showing In Stock Items. Show All 313 Items.
On Sale
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
$898.95
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$830.95
Summit Racing™ induction kit Pro Packs start with the Edelbrock EPS Performer intake manifold, which builds horsepower and torque from idle to 5,500 rpm. Summit Racing™ induction kits also include an Edelbrock 600 cfm Performer carburetor and a 14 in. chrome steel Summit Racing™ air cleaner, plus zinc plated Summit Racing™ carb studs, a Summit Racing™ stainless steel intake bolt kit, and a Fel-Pro Printoseal intake manifold gasket set. These kits are compatible with both the 260 hp and 290 hp versions of this engine and are designed for smooth street performance.
( 23 )
$774.86
American Autowire Classic Update Series wiring systems power up your classic ride! Modifying your vintage muscle with modern amenities is beyond the capabilities of OE wiring. These harness kits let you keep the retro looks and enjoy power accessories like air conditioning, windows, and fuel injection. The assemblies are year/make/model-specific for a professional fit and are offered in over 60 different kits. Updating your classic has never been easier! Classic Update Series details: * Longer length wire allows for stock or custom routing * ATO-style fuse panel and more circuits * Full color schematics and instructions * Ignition, headlight, and dimmer switches (most kits) * Upgraded 8-gauge wire for alternator, fuse link protection, gauge cluster options, and disconnect * Pre-wired fuse panel mounts in the stock location
( 556 )
$785.91
—
$993.70
Our Summit Racing™ complete front drum-to-disc brake conversion kits take the guesswork and high price tag out of building a braking system. The kits are available in standard and ultra versions (ultra versions include cross-drilled, slotted rotors and braided brake lines). Order the model recommended for your vehicle. Summit Racing™ complete brake conversion kits include: * Power brake booster * Master cylinder * Proportioning valve kit (where applicable) * Rotors * Calipers * Backing plates (where applicable) * Spindles or brackets to convert existing spindles (depending on application) * Brake hoses and banjo bolts (where applicable) * Bearings * Seals * Dust caps * Spindle nuts and washers * Installation hardware
( 39 )
$780.95
—
$815.95
Get more for your dollar with Howards Cams Retro-Fit hydraulic roller camshaft and lifter kits. You'll get more lift and power for less money with these street performance grinds. They're perfect for those wanting to upgrade to hydraulic roller cams. Howards manufactures their cams using the highest grade race-quality cores and precision-grinds their cams to provide the quality and performance that you want at a reasonable price. They've matched these hydraulic cams with a perfect set of their premium lifters. Overhaul your valvetrain for mild to wild street performance with Howards Cams Retro-Fit hydraulic roller camshaft and lifter kits.
( 69 )
$968.99
—
$1,059.99
On Sale
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$902.33
—
$1,007.33
$822.43
—
$915.93
Summit Racing™ frame brace kits are designed to easily install and strengthen the factory frame of your classic car or truck. The benefit of stiffening the frame is improved handling and a tight predictable feel. Reinforce your chassis and create a custom pro touring style, corner carving ride with these Summit Racing™ frame brace kits. *Constructed From DOM tubing *Computer Designed, Machined, and Bent *Welding Required for most kits *Adjustable transmission crossmember for Manuals or overdrives included *Generous openings for Dual Exhaust pipe routing *Exhaust hangers provided
( 68 )
$979.99
QA1 Pro coilover systems are engineered from the ground up to offer unmatched performance over stock suspension setups. Pro coilover systems utilize adjustable and non-adjustable coilover shocks and springs designed specifically for replacing the factory shocks and springs. This combination offers ride height adjustment and variable position valving adjustment (where applicable) for performance not found in other kits. Choose QA1 Pro coilover systems for your next suspension upgrade.
( 343 )
$908.66
—
$964.95
RideTech HQ coilover kits are designed with handling performance and ride quality in mind. They feature impact-forged aluminum threaded body monotube, gas-pressurized shocks that have been clear anodized for corrosion protection. Other features include: oversized rod guides for maximum strength and durability; Delrin coilover spring washers for easy spring retainer adjustments; stainless steel mounting brackets; and CNC-machined billet hardware. The shocks include Hyperco springs (made with high-tensile premium cold-wound steel) that have a durable powdercoat finish. The unique pinch-clamp height adjusters offer finer threads for easy height adjustment. Order the kit designed for your specific vehicle.
( 14 )
$840.00
—
$890.00
Stay ahead of the curve with fresh instrumentation, like the Dakota Digital VHX direct-fit analog gauge systems. Ideal for classic car restorations, this innovative line features dozens of single dials, clusters, and multi-gauge panels, which install into your vintage ride with no modifications needed. We're talking units for various models of Ford, Chevy, Mercury, Oldsmobile, Jeep, Toyota, Buick, Pontiac, and Dodge … with new "replacements" available for cars and trucks as far back as 1932! Depending on the system you select, you could receive data readings for as many as 20 automotive functions; and, bringing the retro dashboard displays into the 21st century are bright LCD message centers, backlit faces, and fully lit needles. These gauge kits are equally impressive behind the scenes, with solid-state sensors, precision stepper motors, and customizable data readouts. Dakota Digital gauges have revolutionized the industry—just think what they'll do for your driving experience!
( 488 )
$945.25
Chevrolet Performance cast iron Vortec cylinder heads will fit 1958 and later small block Chevy engines, and offer a 20 to 40 hp increase over earlier cast iron small block heads. Features include fast burn combustion chambers, and a high-velocity port design. They require the use of a Vortec-style intake and self-aligning rocker arms, and come complete with valves, springs, and retainers.
( 6 )
$795.65
These March Performance Sport Track Chevy serpentine pulley kits are designed for the budget-minded engine builder with the same quality and innovation as the normal March Performance kits. They are designed to mount the air conditioning low and on the passenger side for a compact and clean appearance. The serpentine pulley kits will eliminate belt throwing and offer no-slip operation. These March Performance Sport Track Chevy serpentine pulley kits are manufactured from 6061-T6 billet aluminum and are available in black or silver powdercoated finishes.
( 57 )
$779.99
—
$846.99
Classic looks are great but the handling ... well, not so much. Classic Performance has designed, engineered, and tested their power steering conversion kits to make your vehicle navigate as good as it looks! CPP kits include their 400 or 500 Series power steering boxes that utilize the latest steering technology and assure smoother handling of your classic/vintage ride. Other kit components may vary, but whether your special ride is a full size Chevy car or a Ford pickup Classic Performance will make it better with one of their many power steering conversion kits.
( 120 )
$804.99
Howards Cams Rattler camshaft and lifter kits are designed for maximum performance. Utilizing the highest grade race quality cores available, the Rattlers are 100 percent Rockwell checked and Parkerized to ensure the highest quality control standards available anywhere. They're manufactured on dedicated high-precision CNC cam grinding machines, and the hydraulic lifters offer precision oil control. Howards Cams Rattler camshaft and lifter kits are ideal OE replacements, as well as for use in high performance racing applications.
( 25 )
$999.99
RideTech StrongArm tubular control arms are designed to stiffen up your vehicle's chassis, while providing a smoother ride. They feature a tubular design that offers maximum strength—and are available for a variety of front and rear positions. The control arms include bushings and factory-installed ball joints (front), making installation easier. Get optimum suspension geometry with a set of RideTech StrongArm tubular control arms; order the kit recommended for your vehicle.
( 17 )
$895.00
Don't compromise your engine's performance or risk the well-being of your valvetrain with inferior lifters! Ensure consistent valve timing, efficient valvetrain operation, and maximum power with Isky Silver Series HPx needle-bearing hydraulic roller lifters. Isky Racing Cams uses advanced design and precision engineering to provide the quality that your ride deserves—find out for yourself when your order the Isky Silver Series HPX hydraulic roller lifters designed to fit your application.
( 11 )
$831.99
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 106 )
$1,449.95
$763.95
—
$1,049.95
No camshaft swap is complete without a new set of lifters. Treat your engine to the "good stuff" with new Trick Flow® hydraulic lifters or lash adjusters. Featuring durable hardened steel construction, these lifters and adjusters are a must when installing new cams—and are perfect replacements for worn or ticking lifters in used engines. The retro-fit roller lifters with vertical-style link bars are designed for a roller cam conversion in engines originally equipped with a hydraulic flat tappet cam. Overhead valve engines may require different length pushrods. The sets are available in a variety of fitment options for applications from 1955 and up.
( 47 )
$814.99
Summit Racing™ Pro SBC LS firing order hydraulic roller retrofit cams are available in seven stages--from a small smooth idle cam capable of towing, to a big duration stomper that's ready to go bracket racing. Utilizing the LS firing order on a traditional small block Chevy improves the engine in several ways, including exhaust sound and harmonic improvements. These kits include a premium camshaft and drop-in link bar style hydraulic roller lifters. Best of all: these Pro SBC LS firing order hydraulic roller retrofit cams are precision-ground in the USA on USA billets! Order the cam recommended or your application.
( 1 )
$915.51
On Sale
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 23 )
$1,006.85
—
$1,118.80
$906.16
—
$1,006.92
Upgrade your induction system with superior paired performance! Edelbrock Performer Air-Gap intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include a Edelbrock Performer Air-Gap aluminum intake manifold, intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Performer Series 600 cfm electric choke carburetor. The intake uses an open air space that separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge that means more power and excellent throttle response. Ready for a change? Try Edelbrock Performer Air-Gap intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 7 )
$1,022.95
Many of the late model blocks have taller lifter bores, which means standard seat height lifters with an offset require manual notching of the lifter bore for pushrod clearance. Crower developed a lifter with a +.300 in. higher pushrod seat to solve this problem. Crower Dart block raised seat roller lifters are taller to clear lifter bore and have lightweight billet alloy bodies paired with a robust stainless steel alignment blade. They feature High-Pressure Pin Oiling (HIPPO), allowing more oil to be delivered to critical high-load areas for greatly improved cycle life.
( 1 )
$1,090.99
Wilwood Classic Series Dynalite front brake kits deliver consistent stopping power for your classic cars. The forged Dynalite calipers combine technology and style to create stronger, more reliable clamping power that's proven to outperform existing styles of this popular caliper size. The complete packages also include solid surface or drilled and slotted rotors, premium brake pads, brackets, and all required hardware. Kits are available to accommodate the needs of daily driving and show cars. Order the model designed for your vehicle application.
( 259 )
$858.26
—
$866.93
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
