Availability
Showing In Stock Items. Show All 18 Items.
Summit Racing™ engine stand adapters are a better way to mount your engine block to your stand. Built from billet aluminum, these plates eliminate the adjustable arms and use all of the available bellhousing bolt holes. The result is a more rigid, secure mount that will eliminate most of the sagging that occurs as you add more weight to the engine assembly.
( 4 )
$109.99
LSM Racing has developed the standard for changing valve springs with their innovative design. These LSM Racing valve spring removal tools are simply the best quality and easiest to use tools available. They make changing valve springs a fast and simple one-person job.
( 110 )
$259.99
Removing valve springs means working within a small space--a place where some tools are incapable of reaching. COMP Cams valve spring compressors enable you for effortless removal in these areas. Their tools allow you to work with either one or two valve springs at a time, without the hassle of first having to remove the rocker stand or any of the other installed rocker arms. They can be used on all GM Gen III/IV LS-type engines, as well as, small block Chevy and Ford engines with the cylinder heads on or off. A simple design with big time-saving results; choose the completely capable COMP Cams valve spring compressors for hassle-free removal.
( 84 )
$154.95
Test your cooling system's pressure with these accurate testers from MotoRad. These testers will test today's higher pressure cooling systems and pressure caps up to 30 lbs. The gauges test pressure ranges of 17 to 19 lbs., 20 lbs., and 28 to 30 lbs., with a color-coded dial that makes it simple to accurately test higher pressure caps and systems. A pressure release bar releases pressure buildup before removing the head from the neck. These MotoRad cooling system pressure testers come in a plastic carrying case with an easy-to-use instruction manual.
( 2 )
$107.99
Summit Racing Equipment's® patented EZ pushrod length checkers make finding correct pushrod length a snap ... literally! Simply loosen the set screw, tighten the rocker, tighten the set screw, and remove the rocker. The pushrod is then at zero lash. Measure with a dial caliper and add the amount of required lifter plunger preload to get the perfect pushrod length. You'll attain accurate, consistent measurements--and no more counting rocker bolt turns! These stainless steel tools are a must for short travel lifters, and a Master Kit is available for professional engine builders. Order the lengths needed for your applications.
( 10 )
$149.99
Summit Racing™ engine lift plates allow you to lift your engine up by its intake manifold for easier maneuvering. You can also use them as manifold covers when you store your engine.
( 174 )
$111.99
You know what a chore it can be to remove high-pressure valve springs with shaft mounted rocker arms. Remove and install valve springs the safe and correct way with COMP Cams shaft mount valve spring compressors. They are designed to facilitate valve spring removal on heads with shaft mounted rockers while the cylinder heads are still on the engine.
( 24 )
$159.95
Moroso degree wheel crankshaft sockets easily turn over your engine and degree-in the camshaft. These sockets have a 1/2 in. drive and make it easier to locate TDC and BDC. They feature a knurled jam nut that is used to position a degree wheel, and can be loosened and turned separately from the socket. A broached keyway allows the socket to slide over the crankshaft snout for positive engagement.
( 8 )
$103.99
RideTech AirPod covers keep your system under cover and your trunk looking good. These heavy-duty covers provide a professional, aesthetic look for your 3 or 5-gallon RideTech AirPod compressor. The covers are easy to install for a clean, sleek appearance.
( 1 )
$165.00
On Sale
Yukon Gear & Axle differential bearing preload tools, spanner wrench, and side adjusters are all constructed from high-quality materials and have simplistic designs to make your life easier when you're working on multiple different vehicle applications. Whether you're looking for bearings, differentials, or side adjustment, Yukon Gear and Axle has you covered.
( 9 )
$172.89
—
$172.99
$146.96
—
$147.04
Store, transport, and work on your engine with Allstar engine cradles. They are manufactured from 14-gauge, 1 in. square tubing and are coated with a black powdercoating to guard against corrosion and rust. The cradles include Grade 5 fasteners. When you're done, these cradles easily disassemble for storage, saving you valuable floor space for other projects. Working on your engine is easier with Allstar engine cradles.
( 44 )
$109.99
On Sale
Yukon Gear & Axle inner axle side seal installation tools ease the frustration of getting your axle seals aligned properly. Having the right tools makes any job easier, and not having them can make the job miserable, if not downright impossible! These specially designed tools are simple to use. So, un-complicate the installation of new seals on your Dana axles with the right tools--Yukon Gear & Axle inner axle side seal installation tools.
( 9 )
$221.99
$188.69
Altronics DIGICAM digital degree system is one of the easiest, most accurate ways to degree your camshaft. Altronics DIGICAM crank socket inserts are required for use with the DIGICAM and cover most popular Chevrolet (including LS1), Ford, Pontiac, Mopar, and Oldsmobile engines. They even offer a 6-piece set that's perfect for shops or individuals that rebuild multiple engine types.
Not Yet Reviewed
$149.99
On Sale
There are many steps in setting up a new ring and pinion, and none should be taken lightly. When it's time to set up the pinion preload, you'll appreciate the assistance of Yukon Gear & Axle pinion yoke holders. These specialty tools firmly hold the yokes in place and are compatible with almost all differentials. Yukon Gear & Axle pinion yoke holders make setting pinion preload settings a much easier process.
( 2 )
$174.99
$148.74
CA offers an easy-to-use cart to store your Chevy Corvette's targa hardtop or roof panel when it's not in use. The storage stands feature sturdy aluminum construction and padded contact points for stable and safe support. You can roll the cart around the garage easily on four swivel casters. Instructions included; some assembly required.
Not Yet Reviewed
$229.99
On Sale
Clearance
Yukon Gear & Axle differential carrier bearings are low-cost replacements for Positraction or locker upgrades. They bearings are made of steel and most include races and shims. Order the kit recommended for your axle application.
( 18 )
$194.99
$103.50
P-Ayr Products Replica intake manifolds are designed to bolt into your car in place of your real intake for test-fitting parts. Molded from durable polyurethane foam, they include all of the necessary mounting holes—with steel threaded inserts so you can mock up your new high performance parts. All specifications are held to OEM tolerances, enabling you to have an accurate simulation of the actual intake. Order the model needed to replicate your intake manifold application.
Not Yet Reviewed
$210.99
On Sale
Yukon Gear & Axle setup bearings easily slip on and off the pinion journal to allow for pinion depth adjustment. These setup bearings ensure you have the proper tolerances needed and are a great addition to your toolbox!
( 3 )
$164.99
$140.24
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
