Availability
Howards Cams performance hydraulic lifters are 100 percent Rockwell-tested. They are designed for maximum performance, while offering precision oil control. These lifters can be used as OE replacements, as well as in high performance racing applications.
( 27 )
$143.99
—
$199.99
Howards Cams Rattler camshafts build solid power and a classic sound while retaining drivability. They feature wider lobe centers and use a more aggressive ramp rate to help with air velocity. Although their design is for high-performance street use, they also work well with a stock torque converter. Howards Cams recommends using their Rattler camshafts with a converter stalling above 1,800 rpm and a set of steeper rear-end gears.
( 25 )
$199.99
—
$234.99
Howards Cams double roller billet steel timing sets are designed for accuracy and long life. Lightweight by design, these sets feature a billet steel cam sprocket with lightening holes, a heat-treated crank sprocket, and a black oxide coating. They also include large .250 in. diameter seamless roller chains.
( 65 )
$115.99
—
$125.99
Today's cams have more aggressive lobes. That's why increasing the oil supply to these lobes is critical. Howards Cams uses a precision "E.D.M." laser to burn a .021 in. hole in the center of the face of their direct lube extreme-duty mechanical lifters. This allows for a constant oil supply to the cam lobe, resulting in higher valve spring pressures, more aggressive profiles, and reduced lobe wear.
( 28 )
$232.99
Howards Cams direct lube hydraulic flat tappet lifters use a precision minor flat ground on the side of lifter body to supply oil to the cam lobe/lifter interface. This allows for a constant oil supply to the cam lobe, resulting in higher valve spring pressures, more aggressive profiles, and reduced lobe wear.
( 8 )
$215.99
Howards Cams Street series retrofit hydraulic roller lifters are designed for street performance enthusiasts who want to upgrade to a hydraulic roller camshaft. They are manufactured to fit early or late model blocks, including blocks with tall lifter bosses. Howards Cams uses cold form technology to shape their bodies for durability. The lifters are then carbonitrided and tempered for hardness. They also feature hardened and tempered steel alloy roller wheels, heat-treated stainless steel cross bars, and high-alloy steel tie bar buttons. Howards Cams Street series retrofit hydraulic roller lifters are specifically designed for street applications up to 6,500 rpm.
( 89 )
$118.99
Manufactured from the highest quality steel alloy and heat-treated, Howards Cams long slot rocker arms make an excellent choice for stock engines or street performance. These rocker arm sets include anti-gall rocker balls and locking nuts. Serious parts for serious power performance, choose Howards Cams!
( 9 )
$109.99
—
$154.99
Howards Cams Big Daddy Rattler camshafts are street performance cams designed to give a nice aggressive-sounding idle without sacrificing throttle response and horsepower gains. Big Daddy camshafts are top dog in the Rattler lineup, and as such they offer a rough idle, and are best used in Pro Street or street/strip applications. Compression needs to be at least 9.5:1, the torque converter needs to stall 2,800 rpm or higher, and a performance intake manifold, steeper gears, and free-flowing exhaust are required to take advantage of the camshaft's capabilities.
Not Yet Reviewed
$199.99
Make bronze distributor gear wear a thing of the past with these Howards Cams composite distributor gears! NASCAR-proven technology yields precise timing and extended durability. They are precision-manufactured from carbon ultra fiber material and offer 300 percent more durability than bronze distributor gears when used with steel camshafts. Howards Cams composite distributor gears can be used with cast or billet cams.
( 8 )
$142.99
—
$143.99
Howards Cams Max Effort hydraulic lifters were specifically designed for higher revving applications. They are perfect for race applications which require a hydraulic lifter or high performance street applications that need an extra edge. These lifters can show a noticeable increase of power from 5,000 rpm and up.
( 8 )
$215.99
Howards Cams Maximum Effort stud girdle kits are designed to increase the strength and rigidity of rocker arm studs by eliminating flex and thereby ensuring true rocker arm ratios. These stud girdles are made from the highest quality aluminum and include locking hex head adjusters. Howards Cams aluminum stud girdle kits are a must for all competition engines not using shaft rockers.
( 26 )
$269.99
Howards Cams offers their hydraulic flat tappet camshafts in a variety of configurations and performance levels for street, strip, and oval track purposes. All their flat tappet cams meet strict requirements to ensure the highest quality (and many get packaged and shipped in their unique, reusable, high-impact-plastic cases to ensure the quality reaches your doorstep.) Get the profile you want—from mild and smooth to loud and rough—with the hydraulic flat tappet camshafts from Howards Cams designed for your application.
( 40 )
$189.99
—
$239.99
Howards Cams performance mechanical lifters are designed and manufactured to the closest tolerances in the performance industry. Their precision-ground crown faces ensure long life for both cam and lifters in the harsh competition environment.
( 3 )
$218.99
—
$246.99
Howards Cams oval track lift rule hydraulic flat tappet camshafts are designed to meet the requirements of oval track racing. These camshafts are offered in a variety of profiles, each specifically geared to track length and type. Manufactured using dedicated, high-precision cam grinding machines, each oval track lift rule hydraulic flat tappet camshaft is 100 percent Rockwell checked and Parkerized to ensure the highest quality standards are met. You can count on Howards Cams for the right cam for your oval track racing needs!
( 3 )
$232.99
—
$239.99
Howards Cams Track Smart nitro-carbided rocker arms offer 3-5 times greater resistance to wear, fatigue, and fracture in high-stress areas. These steel, long slot-style engine components are available for a wide range of vehicle applications. Order the recommended stud size and rocker arm ratio replacements.
Not Yet Reviewed
$179.99
Howards Cams rev kits are designed for roller cam applications to increase valvetrain stability throughout the rpm range. In addition to increasing rpm capabilities, these rev kits will also keep the lifter in the lifter bore in the event of valvetrain failure. The locator bars and lifter buttons are made of the highest quality aluminum and are then anodized for protection. Each of these kits comes complete with locator bars, springs, and lifter buttons.
( 6 )
$114.50
—
$165.99
Howards Cams offers Big Mama Rattler flat tappet camshafts for a wide range of Chevrolet and Ford applications from the 1950s and up. Rattler cams are ideal for street enthusiasts who want the classic exhaust sound—but also want true performance to go with it. They deliver Lopey idle and throttle response you expect from a performance cam. Big Mama Rattlers provide the best of both worlds: sound and performance for street or street/strip applications. (Note: For the best exhaust note, you should use a good dual exhaust system without a crossover. A crossover will add minor performance, but mellow the exhaust tone.) Best with lower gears.
Not Yet Reviewed
$199.99
Howards Cams American Muscle mechanical flat tappet camshafts make great replacement options for your muscle car. Howards offers the highest-grade of race-quality cores and grinds them in-house on dedicated high-precision cam grinding machines. All their flat tappet cams meet strict requirements to ensure the highest quality and many get packaged and shipped in their unique, reusable, high-impact-plastic cases to ensure the quality reaches your doorstep. Put some brawn in your muscle car with the American Muscle mechanical flat tappet camshafts from Howards Cams designed for your application.
( 1 )
$236.99
—
$249.99
Do you need aggressive quality? Howards Cams mechanical flat tappet camshafts are 100 percent Rockwell-checked and Parkerized to ensure the highest quality control standards! They use only the highest-grade, race-quality cores available and are ground on dedicated, high-precision machines at Howards Cams--not reboxed! Capable of high-engine rpm, these camshafts are a good choice for everything from moderate street performance to serious racing. Do you have lots of rpm? Go aggressive with a winner--Howards Cams mechanical flat tappet camshafts!
( 18 )
$219.99
—
$259.99
Howards Cams Street Force 2 hydraulic flat tappet camshafts are engineered for the street performance enthusiast. The specially designed grinds were created to provide a good idle and increased throttle response. This series of camshafts work best with an improved intake manifold, 4-barrel carburetor, free-flow exhaust, and 1,600 to 1,800 stall rpm torque converter. Street Force 2 models also feature 112 degree lobe separations to help maintain vacuum. The cams are available for a wide variety of year/make and engine applications. Street performance begins with Howards Cams!
( 4 )
$234.99
Clearance
Howards Cams race series vertical bar hydraulic roller lifters offer proprietary hydraulic valving specifically designed for continuous operation to 6,600 rpm with ideal seat pressures between 150-160 lbs. The lifter bodies are fully machined from alloy steel bar stock and are completely micro-polished. The nose wheels are machined from 8620 material and the cases are hardened for durability. Howards Cams race series vertical bar hydraulic roller lifters are fully rebuildable.
( 6 )
$146.99
Howards Cams Track Smart connecting rods are designed to provide the ultimate in strength and durability. They start with certified 4340 aircraft-quality steel and are fully CNC-machined on the newest generation of equipment to ensure the removal of all surface imperfections. They are fully stress-relieved and shot-peened to ensure that no stress risers remain and specially heat-treated using a multi-phase process. Howards Cams Track Smart connecting rods are bronze bushed for floating pins, while ARP cap screw fasteners secure the caps. Choose the rod sizes needed for your engine.
( 1 )
$104.99
Howards Cams American Muscle hydraulic flat tappet camshafts feature a design that replicates some of the most iconic OE camshaft-grinds from the '60s and early '70s. Howards took these fantastic grinds and made slight changes to the ramp speeds and minor duration changes for better reliability and horsepower without affecting the throttle response and the original-style exhaust rumble. Howards Cams manufactures the American Muscle hydraulic flat tappet camshafts designed for your application on dedicated, high-precision cam grinding machines to strict tolerances.
( 8 )
$199.99
—
$234.99
Howards Cams Street Force 1 hydraulic flat tappet camshafts were designed for the street performance enthusiast. These camshafts feature true street performance with little or no added maintenance. The specially designed grinds were created to provide good idle, mild street performance, and strong low-end torque. Street Force 1 camshafts work best with a dual-plane intake manifold and dual exhaust. The camshafts also feature 112 degree lobe separations to help maintain vacuum. They're available for countless year/make and engine applications. For premier street performance, choose Howards Cams.
( 7 )
$234.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
