Availability
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 68 )
$3,084.99
—
$5,455.99
Silver Sport EasyFit transmission kits are designed to be the perfect start to your TREMEC TKX installation. The kits are tailored with a vehicle-specific shifter position and components to make your installation easy and less costly. Features and specs: * STX Shifter--short throw shifter (depending on kit) * Transmission mount, reverse light harness, pilot bushing, and required hardware * 5-speed pattern shifter ball or 5-speed shift pattern console plate (depending on kit) * EDP coated, steel crossmember (depending on kit) * Gear ratios--2.87, 1.89, 1.28, 1.00, 0.68, 2.56R * 600 lb.-ft. torque rating * 26-spline count input shaft * Quality-tested with a 12-month factory warranty
( 4 )
$4,195.00
—
$4,395.00
Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with disc or drum brakes, axles, bearings, and seals--everything you need to upgrade your rear-end, courtesy of Currie Enterprises.
( 7 )
$1,550.00
If you have 1993-1997 Camaro or Firebird and are tired of using the factory pull-style clutch system, RAM Clutches has the solution for you with their single disc push-type conversion Camaro/Firebird clutch kits. Each kit comes with the necessary components to convert your car from "pull-style" to the more conventional "push-style" actuation. The kits come in a choice of either a steel or aluminum flywheel in either a one-piece or two-piece seal configurations, depending on your application. Clutch kit sold separately.
( 1 )
$1,099.00
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$4,350.00
—
$4,395.00
TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!
( 31 )
$1,853.95
McLeod Street Twin clutch kits are designed to be high performance replacements for your OEM clutch. They include everything you need--a new disc, pressure plate, and your choice of a billet steel or billet aluminum flywheel. McLeod Street Twin clutch kits are pre-balanced to fit specific applications and include the correct alignment tool for installation.
( 4 )
$1,399.00
Hays offers Hot Street clutch kits for a variety of Chevrolet and Ford applications from the 1950s and up. They deliver ultimate Street/Strip performance through matched components. A 10.5 in. or 11 in. metallic disc with 6-spring helix sprung hub provides superior grip needed for the strip, while the matched diaphragm-style pressure plate provides a pedal feel comfortable enough for the street. This ensures 30 percent more clamping pressure and transmits that through a billet steel flywheel. These matched components provide the peace of mind purchase you've come to expect over the years from Hays. Order the kit recommended for fitment on your vehicle. Additional details: * Kit includes billet steel flywheel, pressure plate, metallic disc, pressure plate bolts, dowels and alignment tool * Street/Strip clutch kit provides excellent holding strength with a smooth daily driver pedal feel * Designed for power levels up to 550 naturally aspirated horsepower (500 hp for forced induction/nitrous)
Not Yet Reviewed
$1,299.95
Currie 9 in. crate rear end assemblies offer a direct-fit, bolt-in solution for most common car, truck, and Jeep platforms. They feature larger spline axles, heavy-duty components, and internals from leading manufacturers. These axle assemblies are built to exacting standards matching factory specifications for suspension mounting points, pinion location, overall axle width, and wheel bolt pattern for hassle-free installation. Prior to shipping, skilled craftsman meticulously assemble essential parts to deliver years of trouble-free operation for your vehicle. They offer a broad range of gear ratios, performance differentials, or even a spool—if that's your thing. You'll be ready in no time for cruising, racing, off-roading, or just daily driving with Currie 9 in. crate rear end assemblies. Order the kit designed to fit your specific model.
( 4 )
$4,000.00
—
$4,700.00
On Sale
McLeod 4400 Series truck pull clutch kits are ideal for truck puller and high-horsepower sand drag applications. These discs are specifically designed for non-shifting motorsports and not intended for street use. To dominate the competition, you need performance engineered driveline components like the McLeod 4400 Series clutch system designed for your specific application. Product features include: * Borg & Beck pressure plates with counterweights * High-rpm lock-up capacity * Steel flywheel and sintered iron discs
Not Yet Reviewed
$2,555.00
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 800 hp * Up to 700 lb.-ft. of torque * Stall: 2,800 to 3,400 * Custom-built, custom-stalled 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input shaft * 300M main shaft * 300M forward clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blueprinted pump and valve body * Transmission mount * New OEM steel pan
( 1 )
$7,845.00
RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.
( 2 )
$1,850.00
—
$2,300.00
RAM Powergrip HD clutch kits are the ultimate kit for extreme street and track performance. This race inspired clutch kit will provide more clamping pressure over a stock unit and can handle power levels up to 650 hp. All Powergrip HD kits feature an increased clamp load pressure plate, providing crisp clutch engagement with only a slight increase in pedal effort. The Powergrip HD clutch disc features RAM's premium 900 series metallic facing material on both sides. This allows the Powergrip HD unit to deliver maximum grip in an extreme high-horsepower street or racetrack application. These RAM Powergrip discs also utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 23 )
$1,427.00
Stock clutches are made for stock horsepower. Mantic Clutch USA 9000 Series twin disc clutch kits are direct replacement upgrades that can handle 1,010 lb.-ft. of torque capacity at the crank and roughly up to 820 to 850 lb.-ft. at the wheels (capacity will vary with use and type of power adder being utilized). Engineered for serious performance builds, Mantic 9000 clutch kits are the proven answer to transfer all power to the ground and driving your vehicle with a Mantic Twin is easy, pedal effort remains relatively low, with approximately 12 to 15 percent increase over the OE clutch pedal feel. Available for many applications, Mantic Clutch 9000 Series twin disc clutch kits with their ceremetallic friction material and all billet construction make them the best for severe duty yet street friendly. Features and benefits: * SFI approved 1.1 * All billet construction * No Flex at high rpms * High-torque capacity * Lightened flywheel revs quicker compared to heavier OE flywheels * Completely rebuildable—modular construction makes service easy * 9 in. twin disc clutches reduce Moment of Inertia (MOI) for quicker more precise shifts * Ceremetalic friction material offers more heat resistance * OE hydraulic release bearing * All necessary hardware * Cover and components machined from billet stock adding strength and durability
( 2 )
$2,420.00
—
$2,730.00
American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern
Not Yet Reviewed
$4,995.00
Get your transmission in gear with OMIX-ADA manual transmission overhaul kits. Whether you're servicing a Borg-Warner T90 3-speed manual transmission from your Willys or a Tremec T150 manual transmission, these overhaul kits are specifically designed for each application to provide the fit and performance for easier shifting.
( 3 )
$886.99
On Sale
RAM Force 10.5 dual disc clutch kits have a strap-driven floater plate and are precision-balanced for quiet operation. The sprung hub top disc absorbs shock and reduces driveline noise. Force clutches are available with your choice of a 300 Series friction disc or a 900 Series disc. The 300 Series organic disc models are capable of handling 500 to 800 hp; while the 900 Series metallic models can handle between 600 and 1,200 hp. These kits use a marcel spring—a thin, wavy device that helps to eliminate the go-or-no-go tendency that similar dual disc clutches have. RAM Force 10.5 dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the model recommended for your vehicle and engine application.
( 4 )
$1,425.00
—
$1,685.00
$1,282.50
—
$1,516.50
On Sale
RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.
( 1 )
$1,899.00
—
$2,159.00
$1,709.10
—
$1,943.10
On and off the track, time is your most precious commodity. Brinn original transmission modules are the fastest way to purchase all of the Brinn drivetrain products that your race car requires. These kits eliminate the guesswork and time spent searching for the correct parts; they even include a flywheel. The Brinn original transmission is a lightweight, direct drive tranny featuring the lowest rotating weight and moment of inertia available of any transmission on the market. Performance, durability, and smooth shifting are all trademarks of Brinn. Plus, with the same overall length and output splines as a Muncie or Borg-Warner transmission, installation is a snap. Your shop time will drop off, while your race car takes off! Brinn original transmission modules include all necessary fasteners but do not include your 1/4 in. motor plate. Take action and make your life easier in the process. Trust Brinn original transmission modules to deliver what you need. We'll see you in the winner's circle!
Not Yet Reviewed
$4,330.99
McLeod SFT 2000 clutch kits inherit the McLeod standard for twin disc technology. Equipped with two ceramic discs, these units have a 10.5 in. pressure plate, are compliant with factory hydraulics, and will fit in the factory bellhousing. The semi-metallic discs are great for smooth engagement and high-horsepower street driving, yet give you the material you need when fighting for that win light at the track.
Not Yet Reviewed
$1,795.00
TCI 6x 6-speed GM 4L80E automatic transmission packages are the first aftermarket 6-speed automatic transmissions capable of handling 850 hp. They give you six forward gears (2.97, 2.31, 1.57, 1.18, 1.00, and 0.75) for quicker acceleration and increased fuel economy at cruising speeds. The TCI 6x 6-speed GM 4L80E automatic transmission packages are versatile transmissions that fit Chevy small block, big block, and LS Series engines. They also feature a compact design, allowing them to work in a variety of vehicle applications, including pro touring, street, and race vehicles. The TCI 6x 6-speed GM 4L80E automatic transmission packages include a paddle shifter, wiring harness, dipstick, and transmission cooler. Choose the TCI transmission package that's recommended for your vehicle and engine application.
Not Yet Reviewed
$8,907.95
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 600 hp * Up to 600 lb.-ft. of torque * Stall: 2,600 to 3,600 * Custom-built 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input and main shafts * Heat-treated forward steel clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blue printed pump and valve body * Transmission mount * New OEM steel pan
Not Yet Reviewed
$6,845.00
GearStar offers GM 4L805E Level 5 transmissions for a variety of rear-wheel-drive and four-wheel-drive applications. They are compatible with Chevy small block Gen III/IV (LS-based) engines from 1997 and up; and select Chevy small block Gen 1 and big block Gen V, Gen VI, and Mark IV engines from 1955 and up. Performance specs include between 800 and 1,000 hp and up to 900 lbs.-ft. torque, depending on model. Transmission details: * Converter: Custom built and custom stalled 10 in. lock-up Billet Racing * Stall: 2,800-3,600 * Master overhaul kit with alto hardened steels * Raybestos Stage I frictions * Transgo reprogramming kit * Filter * New Torrington bearing kit * New bushing kit * New thrust washer kit * New internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 shift solenoid * New 3-4 shift solenoid * Expanded capacity forward clutch drum * Extra capacity second gear clutch assembly * Expanded capacity third clutch drum * Heat treated input shaft * 300M main shaft * 300M forward clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blue printed pump and valve body * Transmission mount * New OEM steel pan
Not Yet Reviewed
$9,345.00
GearStar offers GM 4L85E Level 4 transmissions for a variety of rear-wheel-drive applications. They are compatible with Chevy small block Gen III/IV (LS-based) engines from 1997 and up; and select Chevy small block Gen 1 and big block Gen V, Gen VI, and Mark IV engines from 1955 and up. Performance specs include 1,500 hp and up to 1,500 lbs.-ft. of torque. Transmission details: * Converter: Custom built and custom stalled 10 or 11 in. billet yank racing * Stall: 2,600-3,600 * Master overhaul kit with alto hardened steels * Raybestos Racing Blue Gen II frictions * High-flow filter * 2 Transgo reprogramming shift kits * GearStar full race shift kit * Carbon fiber heavy-duty reverse band * Wide carbon fiber kickdown band * New bearing kit * New bushing kit * New thrust washer kit * New low roller sprag * 300M hardened input shaft * 300M hardened intermediate shaft * 300M forward hub * High-capacity pump assembly with new gears * New 5-pinion reaction planetary gear set * New 5-pinion low planetary gear set * Extra capacity 2nd gear clutch assembly * Extra capacity 3rd gear super drum with wide heavy-duty sprag, race, and modified plates * Custom machined billet forward and direct drum pistons * Heavy-duty 2nd gear apply piston * New shift solenoids * New EPC solenoid * New PWM solenoid * New manifold pressure switch * New input and output speed senor * New internal wiring harness * Updated boost valve * Updated TCC regulator valve * Blueprinted pump and valve body * Transmission mount * This transmission requires the use of a standalone controller in non-OEM applications * All transmissions are custom-built by one of five master techs from start to finish and DYNO tested with converter the equivalent of 100 miles to ensure that transmission and converter package are in perfect operating condition before they leave the GearStar facility.
Not Yet Reviewed
$11,045.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
