Availability
Showing In Stock Items. Show All 34 Items.
On Sale
Are you installing a clutch? Centerforce pilot bearings and bushings will be needed for proper installation. The bushings and bearings are made of high quality materials, available for many applications, and are direct original equipment replacements. Upgrade your pilot bushings or replacing worn pilot bearings with Centerforce.
( 38 )
$23.95
$21.56
On Sale
Forged from high-quality steel, and then heat-treated for maximum strength, these Mr. Gasket flexplate bolt kits are a must for all high-performance applications. They include lockwashers where required, and are black plated to resist rust and corrosion.
( 5 )
$22.94
$20.65
On Sale
Yukon Gear & Axle U-joint straps keep your driveshaft in place. These bearing retainer straps are available to fit most of the popular U-joint sizes and yokes. Choose the style that's compatible with your vehicle's axle model.
( 30 )
$16.99
—
$22.99
$14.44
—
$19.54
On Sale
Crown Automotive steering knuckle seals install between the steering knuckle and axle housing. Kits may include retaining plates and seals and are application-specific. Check attributes for proper fitment. Crown Automotive is renowned for manufacturing the highest quality OE replacement parts.
( 5 )
$13.99
—
$24.99
$12.59
—
$22.49
On Sale
When you see oil leaking from your Jeep's rear axle, it's time to order new Crown Automotive axle seals. These seals are designed for oil bath axles and are built identically to the originals for excellent fit and finish. Whether your brakes end up coated in oil or the lube simply runs onto the ground, these economical Crown Automotive axle seals will solve messy problems that could lead to more serious issues. Dozens of styles are available to service numerous vehicle applications.
( 13 )
$11.99
$10.79
On Sale
Even the smallest parts are important. Yukon Gear & Axle differential pinion nuts are quality steel fasteners that are ready to help you set the proper preload. They're offered in a variety of styles, sizes, and finishes to fit dozens of axle models.
( 20 )
$11.99
$10.19
On Sale
Clearance
Yukon Gear & Axle spider gear kits offer better performance for your differential. Utilizing high-quality materials and better-than-OE design, Yukon spider gears get you through turns with the traction that you need. The kits are available in a variety of carrier styles and are compatible with dozens of axle models, front and rear. Improve your differential with the addition of a Yukon Gear & Axle spider gear kit.
( 69 )
$23.99
$20.39
On Sale
Yukon Gear & Axle pinion shims help seat your pinion gear properly. These steel inner and outer pinion shims assist you in setting up the right depth and preload for your application. If you need pinion shims, Yukon Gear & Axle offer quality and value.
( 19 )
$18.99
—
$27.99
$16.14
—
$23.79
On Sale
Yukon Gear & Axle offers all of the small differential carrier replacement parts that you need to reassemble your carrier. Oil slingers, thrust washers, shims, baffles, guides, spacers, pins, bearing screw adjusters, and more are available to complete your differential carrier project. These components are available for numerous axle models, such as various GM, Ford, AMC, Dana, and Chrysler applications.
( 27 )
$11.89
—
$18.99
$10.11
—
$16.14
On Sale
Crown Automotive replacement brake hub dust caps seal out moisture and dirt. They are made from quality steel and are zinc plated.
Not Yet Reviewed
$11.99
$10.79
On Sale
Designed for high performance applications, these Grade 8 forged steel, heat-treated torque converter bolts from Mr. Gasket deliver extra strength. Their plated black finish resists rust and corrosion and they come complete with washers where needed.
( 7 )
$18.40
$11.96
On Sale
Yukon's axle bearing retainer plates are cut from steel to provide the most strength for your axle. They manufacture a full line of top-quality small parts to complete any job—including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. Hold your bearings in place with Yukon axle bearing retainer plates, available for fitment on various applications.
( 2 )
$19.99
$16.99
On Sale
Yukon Gear & Axle Super carrier shims come in handy when setting up your new ring and pinion or carrier. A variety of steel shims is included in the kits. Order the kit designed for fitment with your axle model—then set just the right amount of play between your gears.
( 58 )
$16.99
$14.44
On Sale
Yukon Gear & Axle Mighty axle seals use the latest designs and manufacturing technologies to produce a precision fit, tight seal, and long life. Maybe your old seals are starting to wear or maybe you're replacing axles—both are a good time for new seals. Whatever the reason, order the Mighty seals from Yukon Gear & Axle designed to fit your application.
( 36 )
$11.89
$10.11
On Sale
Yukon Gear & Axle offers a complete line of top-quality smaller parts, like their dropout housing studs, to complete your job efficiently. The steel fasteners are available for fitment on hundreds of Ford, Lincoln, and Mercury applications. You might forget the "miscellaneous" pieces, but Yukon hasn't. For all of your small differential part needs, remember Yukon Gear & Axle.
Not Yet Reviewed
$11.99
$10.19
On Sale
Major components, such as the ring and pinion, play a starring role in your gear train's operation. However, they couldn't do their jobs properly without a supporting cast, including these differential crush sleeves from Yukon Gear & Axle. The durable steel collars prevent your pinion bearing from being preloaded too tightly—and help prevent the pinion nut from loosening. When the time comes to service your differential, choose Yukon Gear & Axle crush sleeves, available in configurations for dozens of specific axle applications.
( 11 )
$16.89
$14.36
On Sale
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$11.99
$10.79
On Sale
Crown Automotive knows that wheel bearings can eventually wear out. If you notice excessive play or noise—especially when cornering—and adjustment doesn't fix the problem, the wheel bearings and seals in your Jeep may need replaced. Because wheel bearings are a vital part of your vehicle's suspension, if they become worn or damaged, maintenance should be performed as soon as possible. Crown is a name you can trust for quality automotive parts for numerous vehicles.
( 5 )
$19.99
$17.99
On Sale
Certain high numeric ratio gear sets require special notched crosspins for proper installation. These Yukon Gear & Axle crosspins and shafts are made for some of the Yukon-designed ring and pinion sets that need aftermarket crosspins and shafts to work with their parts. The differential components are available for more than two dozen axle models, so match your vehicle to the proper direct-fit replacement. They're manufactured from hardened steel or chromoly for maximum durability.
( 10 )
$11.99
—
$21.99
$10.19
—
$18.69
On Sale
Keep your differential serviced with Yukon Gear & Axle pilot bearing retainers. They're available in aluminum and steel models to work with hundreds of 8 in. and 9 in. axle applications. Yukon offers a full line of top-quality small parts to keep the big parts operating at premium levels. Tap in your Ford pilot bearings in with retainers from Yukon Gear & Axle.
( 5 )
$13.89
$11.81
On Sale
Yukon Gear & Axle manufactures a full line of top-quality small parts to complete any job—including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers, and much more. These differential fill plugs are available in sizes for a variety of vehicle and axle applications.
( 1 )
$14.99
$12.74
On Sale
Are you getting ready for a manual transmission rebuild? Start with one of these comprehensive service kits from Crown Automotive. They supply the bearings, seals, gaskets, rings, and small parts (contents will depend on the application chosen) needed to successfully overhaul your transmission. Preventative maintenance is worth the time spent—and helps to provide reliable long-term performance. Choose the quality of Crown Automotive manual transmission master overhaul kits to get the most from your work.
( 25 )
$22.99
$20.69
On Sale
Crown Automotive pinion shim sets are needed when installing your gears. You'll use them to rotate the axle and line up the driveshaft. These steel shim sets are direct OE replacement parts built to the original specifications. Utilize Crown parts to precisely set your axle up for optimum performance.
( 2 )
$16.99
$15.29
On Sale
Crown Automotive clutch linkage bellcranks are designed and built to OEM specs for excellent fit and reliable performance. There are many parts that go into the working of a vehicle's clutch. Of these parts, the clutch release bellcrank is one of the toughest; however, years of use and weathering will eventually take their toll. Crown bellcranks have a natural finish which allows for coatings to match the vehicle's undercarriage. Whether you're updating your ride or completing a restoration, Crown Automotive clutch linkage bellcranks will keep the pedals dancing.
( 1 )
$15.99
$14.39
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
