Availability
Showing In Stock Items. Show All 29 Items.
On Sale
Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings
( 2 )
$999.95
$898.95
On Sale
Holley EFI intake manifolds feature port-matched upper and lower runners for reduced restrictions. Plus, the EGR passages have been relocated to the outside of the manifold to allow for the use of larger intake ports. The result is greater air capacity, which makes these manifolds the perfect choice for supercharged engines. They're available in a variety of styles and options; select the model designed for your vehicle and/or engine application.
( 6 )
$682.95
$613.95
On Sale
The Cyclones are Professional Products' lowest profile small block Chevy manifolds and are also the only ones that are street-legal on pollution-controlled vehicles. Cyclone manifolds are set up to accept a spread bore carb, but come with an adapter plate that permits the use of square bore carbs. To remain street-legal with a square bore carb, you must use one that is also approved as street-legal for your application. These Professional Products Cyclone manifolds are available in a variety of configurations to suit your needs.
( 29 )
$147.99
—
$249.99
$133.19
—
$224.99
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 29 )
$449.99
—
$469.99
$349.99
—
$369.99
On Sale
These Hurricane intake manifolds are one of Professional Products' very most popular race manifolds. If you are looking for the utmost in performance for the very least amount of cost, then these manifolds are for you! The base Hurricanes are terrific manifolds for budget engines such as claimer motors.
( 23 )
$242.99
—
$290.99
$218.69
—
$261.89
On Sale
These Professional Product Typhoon intake manifolds are powerful dual plane manifolds. For non-pollution controlled street machines, bracket racing, nitrous, or supercharged applications, these are among the best manifolds that you can use. They feature a square bore carburetor flange, nitrous bosses, 4-corner water ports, and dual distributor hold-downs.
( 13 )
$247.99
$223.19
On Sale
Weiand Street Warrior intake manifolds are designed for use on stock or stroker combinations and more efficient cylinder heads. With new cam designs came the need for Street Warrior intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, Street Warrior intake manifolds rise to the challenge and deliver the performance to conquer the competition. Do you want maximum horsepower and torque from today's engines? Then choose Street Warrior intake manifolds.
( 140 )
$299.95
—
$320.95
$269.95
—
$288.85
On Sale
Holley single plane carbureted intake manifolds are designed to provide a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The carburetor mounting pads will accept all stock or aftermarket square-bore carburetors with manual or electric chokes. These Holley intake manifolds are also engineered to accept most stock hardware and accessory brackets—but offer performance features like: an updated plenum divider area; a 1 in. shorter height than their Strip Dominator manifold; and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. Features include: * Single-plane with isolated plenum * Square-bore carburetor mounting flange * Isolated water crossover * Power band: 2,500 to 7,500 rpm * Height: Front 4.18 in., rear 5.28 in. * Port size: 1.92 in. height, 1.20 in. width
( 9 )
$426.95
—
$434.95
$383.95
—
$390.95
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 50 )
$328.99
$228.99
On Sale
Weiand Team G intake manifolds are some of the most advanced single plane, 360 degree intakes on the market, combining excellent bottom-end performance with an exceptionally broad power curve that extends as high as 8,200 rpm. Ideally suited to Circle Track, drag racing, or high performance marine use, they feature a square-bore carburetor pad to accommodate 600-850 cfm aftermarket carburetors (spread-bores will not fit). Team G manifolds are designed for competition use, and they will not accept any stock accessory brackets. Also, hood clearance should be checked. Built using the original tooling, they may have minor appearance imperfections that do not affect their functionality. Such minor blemishes are normal with the sand casting process. Don't search for a vintage intake at swap meets or on the internet; buy the real deal new from Weiand! Features include: * Single plane/high-rise design with isolated plenum * Square carburetor mounting flange * Isolated water cross-over * Available with raised plenums * Offered for a variety of small block Chevrolet and big block Chrysler applications
( 21 )
$399.95
$359.95
On Sale
These CrossWind intake manifolds from Professional Products feature identical plenum and runner designs to the Typhoon. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power.
( 43 )
$234.99
—
$279.99
$211.49
—
$251.99
On Sale
Weiand high-rise/dual-plane Speed Warrior intake manifolds feature long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. They mount single, square-mount 4-barrel carburetors and make power from 1,500 to 6,700 rpm. That makes Weiand Speed Warrior intake manifolds the perfect choice for your street/strip vehicle. To make more power you have to get more air to your engine. Look to Weiand as your power source! Features include: * Permanent mold castings * Precision CNC-machined * Available with exhaust crossover for improved street drivability * Also available with isolated runners to reduce intake charge heating * Available finishes: as cast; polished; black ceramic coating; Everbright * Offered for standard small block Chevy heads, non-EGR 262 c.i.d. to 400 c.i.d. heads, and Vortec (L31) or non-Vortec heads
( 52 )
$366.95
—
$420.95
$330.25
—
$377.95
On Sale
Edelbrock Pro-Flo XT EFI intake manifolds combine a user-friendly design with the latest technology. They're manufactured from aluminum and are available in a natural, polished, or black powdercoat finish for ultimate protection. Pro-Flo XT EFI intakes feature eight equal-length tapered runners and a large plenum. The fuel-injected manifolds are designed to deliver maximum horsepower and a broad torque curve throughout the 1,500 to 7,000 rpm range. Choose the model designed for your vehicle and cylinder head style application.
( 15 )
$637.95
$510.36
On Sale
Holley Sniper carbureted fabricated intake manifolds are budget-friendly, sheet metal style intake manifolds. Each manifold is precision-fixtured and welded for a perfect fit and structural integrity. They are available for carbureted Chevy LS, Ford Coyote, small block Chevy, big block Chevy, and small block Ford engines. Features include: * Available for single or dual carburetor applications * 3mm (1/8 in.) thick T6061 sheet aluminum construction * More durable than competitive intakes * Bead-blasted silver or black anodized finishes * 100 percent TIG-welded * Custom Holley Sniper logo
( 37 )
$695.99
—
$912.95
$502.95
—
$694.79
On Sale
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$824.87
—
$895.87
$775.87
—
$841.87
On Sale
These intake manifold bushings are included with all Professional Products small block Chevy manifolds (except Vortec models) and permit the use of these manifolds on 1987-95 cylinder heads. Straight and angled versions are available .
( 4 )
$8.99
—
$15.99
$8.09
—
$14.39
On Sale
Get super performance from Mr. Gasket! These Grade 5 hex head bolts are black coated plated for protection and appearance. They feature a generous underhead radius for added strength, and hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.
( 4 )
$31.44
$28.30
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$532.95
—
$652.95
$426.36
—
$522.36
On Sale
In head-to-head dyno testing, Holley Keith Dorton Signature series intake manifolds outperformed the nearest competition by 25 HP at 7,100 rpm. Engineered by Holley and professional engine builder Keith Dorton, their single plane design yields superior power in the 4,500 rpm to 8,500 rpm range. They fit 23 degree, standard-port Chevy small block heads, have a square bore mounting flange, and are ideal for classes requiring cast iron heads and un-ported manifolds. They're designed for Oval Track and drag racing.
( 2 )
$564.95
$507.95
On Sale
Our Summit Racing™ high performance intake combos are a great way to build horsepower and save money doing it. These systems are available in single or dual 4-barrel styles and you can take your pick of a variety of intakes. We also included carb studs and all of the intake gaskets you'll need to finish the job.
Not Yet Reviewed
$829.86
—
$875.87
$780.86
—
$821.87
On Sale
These Grade 5 hex head and socket head intake manifold bolts are bright zinc plated for protection and appearance. Kits include hardened flat washers for uniform torque and to prevent galling on aluminum intake manifolds.
( 14 )
$17.60
$15.84
On Sale
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$482.95
$386.36
On Sale
Holley Pro-Jection intake manifolds are designed for Holley 2-barrel Pro-Jection systems. The high-rise, dual-plane manifolds are perfect for powerband ranges from idle to 6,000 rpm. With these manifolds, there is no need for manifold-to-TBI adapters. To make installation easy Holley utilizes late model alternator and A/C bracket mounting bosses and include provisions for an EGR valve and vacuum taps off of the runners. Power is made easy with Holley Pro-Jection intake manifolds.
( 6 )
$433.95
$389.95
On Sale
These special Grade 8 intake manifold bolts from Mr. Gasket feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They're ideal for use where space is minimal, typical on larger runnered race manifolds. These bolts and washers are bright zinc plated for protection and good looks.
( 1 )
$36.83
$33.15
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
