Availability
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$652.95
$227.95
—
$540.95
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 440 )
$374.95
—
$749.95
Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 125 )
$2,375.95
—
$2,534.95
Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design improves flow quantity and quality—and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Performer RPM street fuel pumps produce 6 psi and do not require a regulator; and the clockable lower housing can be rotated for the best inlet and outlet alignment. They're designed for use with gasoline only.
( 425 )
$177.95
—
$191.95
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$830.95
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 569 )
$270.95
—
$595.95
Bolt on some serious performance with these Edelbrock intake manifold combos! The folks at Edelbrock know how to get the most performance out of your car and are here to make things easy for you by packaging one of their legendary intake manifolds with all of the necessary hardware and gaskets to install it in one box. At the heart of these combos is your choice of aluminum intake manifolds that delivers excellent performance at reduced weight compared to your factory manifold. To make installation easy, Edelbrock goes one step further, however, and includes all of the mounting hardware and gaskets required, so you don't have to spend all of your time looking for the small parts. All you have to do is bolt on a compatible carburetor and you are ready to go! Maximize your ride's potential without the headache with these Edelbrock intake manifold combos.
( 23 )
$299.95
—
$484.95
On Sale
Low-profile, single-plane Edelbrock Victor Jr. intake manifolds are very versatile and can be used for drag racing and Oval Track competition, as well as for street applications. Power bands range from 3,500 to 7,000 rpm, on up to 4,500 to 8,000 rpm. There are applications for small block and big block engines, as well as for 2-barrel and 4-barrel carburetors. Some manifolds accept standard restrictor plates and carb adapters.
( 61 )
$663.95
$425.95
—
$631.95
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$571.95
$296.95
—
$607.95
Edelbrock Pro-Flo 4 XT EFI systems provide you with a high performance Pro-Flo XT-style intake and 90mm throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 XT EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled XT intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2.5-bar TMAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 21 )
$2,754.95
—
$2,888.95
Upgrade your induction system with superior paired performance! Edelbrock Performer Air-Gap intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include a Edelbrock Performer Air-Gap aluminum intake manifold, intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Performer Series 600 cfm electric choke carburetor. The intake uses an open air space that separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge that means more power and excellent throttle response. Ready for a change? Try Edelbrock Performer Air-Gap intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 7 )
$1,022.95
Few things say "musclecar" more emphatically than a Tunnel Ram manifold. You can bring back that nostalgic look and hairy-chested performance with Edelbrock's Street Tunnel Ram intake manifolds. They're applicable to all street machines, street rods, Pro-Street cars, and marine applications where low-end torque is not a major concern. Their single-plane, high-rise, dual-quad design delivers excellent mid-range torque and outstanding high-rpm horsepower, from 3,500 rpm up to 7,500.
( 14 )
$663.95
—
$1,332.95
Edelbrock Victor Series racing fuel pumps free-flow 130 gph, outpacing conventional racing pumps which flow around 114 gph. These pumps are a necessity for drag racing, Circle Track, street machines, or any application that demands high-output fuel delivery. They have high-volume inlet and outlet orifices and produce 10 psi. Victor pumps are designed for use with gasoline and Edelbrock's fuel pressure regulators. Order the model recommended for your application.
( 29 )
$183.95
On Sale
Edelbrock's Torker II intake manifolds feature a single-plane, low-rise design that can give you top-end horsepower without affecting the mid-range. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
( 53 )
$281.95
Performer Air-Gap intake manifolds incorporate technology from Edelbrock's potent Victor series manifolds, with an air-gap design feature for ultimate street performance from idle to 5,500 rpm. The air-gap is an open air space which separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge, meaning more power and excellent throttle response throughout the power band. Order the Edelbrock Performer Air-Gap intake manifold best suited for your application.
( 31 )
$395.95
—
$708.95
Edelbrock Performer RPM Dual Quad Air-Gap manifold and carburetor kits provide everything needed to convert from a single carburetor intake to a powerful dual-quad carburetor intake system for small block Chevys. These kits include the new RPM Dual Quad Air-Gap intake, two 500 cfm Thunder Series AVS carburetors (one manual choke, one electric choke), Edelbrock high-tech progressive throttle linkage, a fuel line, and intake manifold gaskets. These kits are available in your choice of natural or the popular EndraShine finish.
( 7 )
$1,865.95
Edelbrock C-26 dual quad intake manifolds are designed for 1955-86 262-400 c.i.d. small block Chevys. These intake manifolds have a low-profile design for low hood clearance on most vehicles. Edelbrock includes air conditioning bosses and front oil-filler tube bosses, however, stock alternator brackets will not fit. The distance between carburetor centers is 6 7/16 in.
( 2 )
$530.95
Edelbrock Performer RPM dual-quad Air-Gap intake manifolds are designed to give your ride classic hot rod looks with modern-day performance. These manifolds stand just 1 5/8 in. taller than the original Edelbrock low-profile C-26 intakes and offer superior performance improvements in the 1,500-6,500 rpm range. The large runners feature Edelbrock's unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge. These aluminum dual-quad intake manifolds are available in your choice of natural or the popular EnduraShine finishes.
( 21 )
$509.95
You can give small block Chevys the nostalgic look of days gone by, as well as a healthy dose of performance, with Edelbrock's Three-Deuce intake manifolds. The balanced, 180 degree firing order arrangement of their port runners produces a broad power band that runs from idle up to 5,500 rpm, for power where you need it. In addition, they have a cast-in exhaust-gas heat riser and a front boss for an oil filler tube.
( 4 )
$540.95
—
$545.95
Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
( 227 )
$21.95
Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM Air-Gap aluminum intake manifold that is available in a variety of finishes, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The Edelbrock Performer RPM Air-Gap intake uses an open air space that separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge that means more power and excellent throttle response. Ready for a change? Try these Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 2 )
$1,032.95
These Edelbrock choke block-off plates are designed to seal off the choke tower on the intake manifold. They are made of aluminum and include a gasket and the necessary mounting hardware.
( 33 )
$32.95
—
$37.95
On Sale
Edelbrock Pro-Flo XT EFI intake manifolds combine a user-friendly design with the latest technology. They're manufactured from aluminum and are available in a natural, polished, or black powdercoat finish for ultimate protection. Pro-Flo XT EFI intakes feature eight equal-length tapered runners and a large plenum. The fuel-injected manifolds are designed to deliver maximum horsepower and a broad torque curve throughout the 1,500 to 7,000 rpm range. Choose the model designed for your vehicle and cylinder head style application.
( 15 )
$637.95
$510.36
—
$746.95
Edelbrock offers the perfect complement to your competition headers--the Victor Jr. CNC intake manifolds! These versatile manifolds are excellent for many applications, from high performance street to drag/Circle Track racing. The CNC-blended port exits match any competition head and also provide maximum performance for engines with standard port location and iron and aluminum cylinder heads.
( 4 )
$573.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
