Availability
Moroso oil pan gaskets offers race-quality, reinforced, and available for many popular engine applications. So, if you're tired of your car marking its territory in your garage or driveway, give one of these Moroso oil pan gaskets a try!
( 141 )
$57.99
Moroso extended oil pump pickups are engineered to be "where the oil is" under the most demanding racing conditions. Designed for use with Moroso oil pans and constructed of steel, they are precision-bent and heliarc welded. A wire mesh steel screen, which is welded to the pickup box, traps debris without restricting oil flow.
( 130 )
$51.99
—
$90.99
Moroso offers manifold filler necks in a variety of styles, materials, and finishes—for applications from 1955 and up. These replacements locate the filler at the highest point to bleed off air on cars with low-mount radiators. The filler necks can be located on either the left or right side of the vehicle. They include 1/2 in. NPT fittings for the installation of a water temperature sending unit, and two 1/4 in. NPT fittings for return lines on popular aftermarket cylinder heads.
( 20 )
$62.99
—
$100.99
Don't settle for flimsy alternator brackets when you can put on a heavy-duty alternator bracket from Moroso. Their stout construction keeps your belts in line under extreme loads and rpms. They're available for a variety of engines and alternator locations. Mounting hardware is included, unless otherwise noted.
( 47 )
$90.99
Moroso harmonic balancer tools use a pilot stud, which keeps the harmonic balancer perpendicular to the crankshaft's centerline, for a bind-free installation. Using a thrust bearing and protective washer, the drive nut can rotate freely, allowing the balancer to be pressed on easily.
( 95 )
$71.99
Special Offer
Who said high quality and high performance can't be cost effective? Moroso Ultra ignition wire sets are equal to or exceed OEM specifications, depending on the application, without the dealer prices. Moroso has more than 50 years of experience in supplying spark plug wires to the top teams of NASCAR and NHRA, as well as auto manufacturers. These sets are available in different thicknesses and colors, assembled or not, with multiple boot end angles. Some models include high temperature sleeves. Order the ignition wires recommended for your application.
( 63 )
$50.99
These Moroso water neck bleeder kits allow you to remove air pockets from your cooling system. They include a filler neck housing with a 90 degree outlet for the upper radiator hose, an aluminum bleeder plate with a petcock valve, two mounting gaskets, and mounting hardware. The Moroso water neck bleeder kits can also be used with Moroso's expansion tanks for maximum cooling performance.
( 4 )
$85.99
Moroso distributor hold-down clamps are extra-thick and heavy duty to ensure adequate retention of distributor housing, and are stud-mounted to eliminate thread wear in the intake manifold. They are slotted for quick distributor removal and include a stud, washer, and nut.
( 25 )
$106.99
Moroso billet aluminum filler necks allow you to install a variety of bolt-on style filler necks or block-off plates, offering cooling system flexibility for both race and street applications. The base locates the filler neck at the highest point, to bleed off air on cars with low-mount radiators. They include a machined port for installing a water temperature sending unit, and two ports to plumb return lines on popular aftermarket heads. And, to give you versatile mounting options--these filler necks can be flipped 180 degrees for either a left or right water hose outlet location.
( 9 )
$71.99
—
$104.99
Moroso degree wheel crankshaft sockets easily turn over your engine and degree-in the camshaft. These sockets have a 1/2 in. drive and make it easier to locate TDC and BDC. They feature a knurled jam nut that is used to position a degree wheel, and can be loosened and turned separately from the socket. A broached keyway allows the socket to slide over the crankshaft snout for positive engagement.
( 8 )
$103.99
Moroso starter heat shields are engineered to protect starters against damaging heat from exhaust manifolds or headers. They are manufactured from a high-temperature insulating material sandwiched between two sheets of aluminum.
( 23 )
$50.99
Moroso water pump spacer kits convert Chevrolet short water pumps to the later long-style pump design. They include gaskets, special heat-treated bolts, and spacers.
( 3 )
$66.99
True racing parts from Moroso! Oil filter aluminum bypass plates replace the engine-mounted oil filter in wet sump oiling systems and direct the oil to a remote oil filter or oil cooler. They're drilled and tapped for -10 AN O-ring inlet and outlet fittings, and include all mounting hardware, gaskets, and an O-ring.
( 3 )
$103.99
Designed to shield your intake manifold from hot oil splash to maintain a cooler intake charge for more power, Moroso Lifter Valley oil baffles also help keep excess oil out of your valve covers and maintain oil pressure in the event of pushrod or rocker arm failure by keeping the lifters in their bores. Due to slight variations in blocks, the baffle may need slight trimming before they will "snap" into place.
( 4 )
$58.99
Moroso cast aluminum crankshaft pulleys have a small diameter that slows fan, water pump, and alternator speeds to reduce horsepower-robbing drag. They also have extra-deep grooves to provide added belt retention during rapid changes in engine rpm. They are precision-machined from high-grade, lightweight, aluminum castings.
( 17 )
$57.99
—
$84.99
Moroso louvered windage trays are designed to allow oil thrown from the rotating assembly to drain into the sump, without splashing back and creating power-robbing drag. Made from heavy-gauge steel, they are PTFE coated for quick drainage.
( 26 )
$57.99
Moroso fuel pump block-off plates are designed to block-off the fuel pump mounting boss when a mechanical fuel pump is not being used. These plates are made of anodized blue aluminum or high-luster triple chrome plated steel.
( 60 )
$60.99
Moroso remote water pump adapter kits are designed to free up space where your bulky water pump would normally reside, allowing for the use of a more compact and cost-effective remote electric water pump. These kits require the use of a remote thermostat housing and are available for a variety of engines.
( 2 )
$98.99
Moroso drive mandrel spacer kits aid you in pulley alignment for your SBC applications. They maintain the register of the mandrel when using a 1/4 in. thick crank trigger. Spacers are constructed of stress-proof steel with a black oxide finish, and come with a 1/4 in. longer crankshaft bolt.
( 1 )
$57.99
Get more horsepower with Moroso billet aluminum crankshaft pulleys. They are machined from solid billets of the highest-grade aircraft aluminum for maximum durability and feature deep, precision-machined grooves to ensure belt retention, even during extreme changes in engine rpm. When crankshaft and water pump pulleys are used together, water pump speed is reduced by approximately 30 percent. These pulleys have an anodized hard-coat for extended life.
( 1 )
$103.99
Special Offer
The new standard in ignition wires for racers on a budget! Moroso Ultra 40 unsleeved custom-fit ignition wire sets are the most powerful and RFI/EMI-resistant wires available for racing today. Plus, their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection. Features: * Kevlar® core that's four times stronger than Aramid cores * Class-leading 40 ohms of resistance per foot * Nickel copper alloy conductors for superior spark energy transfer * Extra-thick EPDM layer for greater dielectric strength * High-temperature silicone boots that can withstand heat up to 600 degrees * Locking stainless steel plug terminals
( 139 )
$103.99
—
$105.99
Moroso water outlet necks are one-piece billet aluminum designs. Most are clear anodized, but all include stainless steel mounting hardware. The filler necks also come with O-rings or gaskets as required. Select the model designed for your engine application.
Not Yet Reviewed
$55.99
—
$64.99
Special Offer
Moroso Blue Max Spiral Core custom-fit wire sets have a special strategically-wound 304 stainless steel conductor and Kevlar core that reduces the ohms of resistance per foot, while delivering more spark energy, better EMI suppression, and a higher dielectric strength. A tough synthetic silicone jacket resists high temperatures and oils, and the extra-thick EPDM layer adds greater electrical insulation. Compact silicone plug boots provide extra header clearance and feature fold-over crimped terminals for a secure connection.
( 49 )
$109.99
Moroso crankshaft socket tools are designed to simplify the task of crankshaft rotation during short block assembly with the balancer removed. They're manufactured of tool quality steel with a durable gold iridite finish.
( 2 )
$55.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
