Availability
Moroso timing pointers feature up to four degrees of adjustment for the best fit. They are manufactured from billet aluminum and have a black anodized finish applied for maximum corrosion resistance. The pointers have a unique smaller shape to hug the harmonic balancer for better, more accurate readings. Moroso timing pointers also include Allen head, countersunk stainless steel mounting hardware for installation.
( 62 )
$44.99
—
$49.99
Moroso thermostat spacers make fixing fitment issues a snap. The billet aluminum spacers raise the thermostat and add ports for water lines to the cylinder heads. The machined O-ring groove on the intake side ensures an excellent seal making installation easy and headache-free.
( 8 )
$48.99
—
$49.99
Lightweight Moroso fuel pump pushrods feature hardened ends to reduce reciprocating mass, which prevents pump arm float and subsequent fuel starvation. They're ideal for use in drag, Oval Track, and street performance applications.
( 9 )
$30.99
—
$44.99
Moroso high-temp under header wire looms are designed to withstand high temperatures associated with headers and route the wires below the heat. Since hot air rises, the wires stay cooler and give the engine a cleaner look. They include chrome plated brackets, high-temp wire separators, and mounting bolts.
( 23 )
$48.99
Special Offer
Who said high quality and high performance can't be cost effective? Moroso Ultra ignition wire sets are equal to or exceed OEM specifications, depending on the application, without the dealer prices. Moroso has more than 50 years of experience in supplying spark plug wires to the top teams of NASCAR and NHRA, as well as auto manufacturers. These sets are available in different thicknesses and colors, assembled or not, with multiple boot end angles. Some models include high temperature sleeves. Order the ignition wires recommended for your application.
( 63 )
$45.16
—
$50.99
Moroso fuel pump block-off plates are designed to block-off the fuel pump mounting boss when a mechanical fuel pump is not being used. These plates are made of anodized blue aluminum or high-luster triple chrome plated steel.
( 60 )
$22.99
—
$32.99
Unlike other roller pilot bearings, these high speed bearings are designed as direct replacements in all Chevrolet V8s, 90 degree V6s, and 1976 and later V6 Buicks. Moroso roller pilot bearings don't require any modification to either the crank or input shafts. They also eliminate premature bearing failure and ensure clean clutch release by maintaining the true alignment of the clutch disc to the flywheel. They're packed with high temperature grease for proper lubrication under extreme high heat conditions, and are suitable for all high performance applications, including drag, oval track/road race, and street.
( 18 )
$32.99
When roller rocker arms are installed, along with a mechanical lifter cam, the amount of oil flow required to the valvetrain is greatly reduced. Installing Moroso oil restrictor kits limits this unnecessary oil flow. These kits reduce the power-robbing windage created from the excess oil draining past the rotating assembly and keeps the oil flowing where it is needed most, the rod and main bearings.
( 21 )
$21.99
—
$44.99
Moroso water neck block-off plates can provide an ideal base to drill or weld your own fitting in place. They are made of aluminum and have two pre-drilled mounting holes to ensure a perfect fit to the intake manifold. The plates include a new gasket and will fit Chevrolet V8 engines.
( 4 )
$21.99
Moroso offers manifold filler necks in a variety of styles, materials, and finishes—for applications from 1955 and up. These replacements locate the filler at the highest point to bleed off air on cars with low-mount radiators. The filler necks can be located on either the left or right side of the vehicle. They include 1/2 in. NPT fittings for the installation of a water temperature sending unit, and two 1/4 in. NPT fittings for return lines on popular aftermarket cylinder heads.
( 20 )
$47.99
Moroso oil filter pre-screens are designed to fit between the filter and block. The screens are made of 304 stainless steel, and can trap small particles in the mesh before they reach your engine oil.
( 3 )
$31.99
Moroso distributor hold-down clamps are extra-thick and heavy duty to ensure adequate retention of distributor housing, and are stud-mounted to eliminate thread wear in the intake manifold. They are slotted for quick distributor removal and include a stud, washer, and nut.
( 25 )
$20.99
—
$24.99
Morso oil pump primers are critical when building a new engine. Priming the engine is an important precautionary measure that should be taken before you start the engine for the first time. Moroso oil pump primers are made from high-strength steel with a durable finish. The portions of the engines primed will vary by make and model. Please see notes and applications for exact specifications as some models may not fully prime the engine.
( 16 )
$23.99
—
$51.99
Moroso header bolts are much stronger than stock and will last under even the most severe conditions. They are constructed of Grade 8 material, feature a black oxide finish, and standard hex head for easy installation.
( 13 )
$21.99
Moroso extended oil pump pickups are engineered to be "where the oil is" under the most demanding racing conditions. Designed for use with Moroso oil pans and constructed of steel, they are precision-bent and heliarc welded. A wire mesh steel screen, which is welded to the pickup box, traps debris without restricting oil flow.
( 130 )
$47.99
—
$51.99
These oil pan bolts are made from Grade 8 steel. They have an integral serrated washer face, which gives them a self-locking effect.
( 35 )
$22.99
Moroso crankshaft pulley shims are designed to make your pulleys line up for optimum alignment. They are made of aluminum, and the sets include one 1/16 in. shim, one 1/8 in. shim, and one 3/16 in. shim. The shims fit 3-bolt crankshaft pulleys only.
( 7 )
$44.99
Moroso oil pump block-off plates are designed to seal the oil passage on the rear main cap when converting over to a dry sump system. They are made of aluminum and are blue anodized for durability. No drilling or modification is required for installation.
( 3 )
$27.99
Moroso starter heat shields are engineered to protect starters against damaging heat from exhaust manifolds or headers. They are manufactured from a high-temperature insulating material sandwiched between two sheets of aluminum.
( 23 )
$50.99
—
$55.99
These mounts are made for racing. Moroso solid steel motor mounts replace stock, OEM-style rubber mounts to prevent torque loss and binding linkages, a common result of excessive engine movement. These solid steel mounts eliminate the need for bulky torque straps and chains and are covered with a protective zinc coating.
( 135 )
$41.99
Made of Grade 8 steel and heat-treated for maximum strength, Moroso flexplate bolts feature a black oxide finish for corrosion resistance.
( 12 )
$22.99
Moroso balancer bolts have a 3/4 in. hex head, which provides a larger contact surface for more positive socket engagement. These bolts help the process of rotating the crankshaft by hand.
( 23 )
$42.99
Moroso Performance Products manufactures a complete line of heavy-duty oil pump intermediate shafts. These shafts are made of high-quality steel for extended reliability. The steel sleeve is pinned to maintain correct alignment between the oil pump and the shaft.
( 15 )
$41.99
Moroso lifter valley oil vents offer positive ventilation to the upper engine, while preventing drainback to the crankshaft. They help stop excessive windage and horsepower loss.
( 1 )
$49.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
