Availability
Showing In Stock Items. Show All 132 Items.
Sealed Power hydraulic lifters are precision-manufactured to maintain precise valve timing under all operating conditions. A patented constant orifice metering valve provides precise oil metering to the overhead valvetrain, and longer plungers or pistons provide increased bearing surfaces, resulting in longer lifter life. Their check valves are lightweight flat discs, allowing for higher speeds and more uniform operation than competitive lifters.
( 52 )
$6.99
These heavy-duty Summit Racing™ balancer bolts are the best way to bolt on your damper. As the crankshaft flexes and twists, the damper absorbs a lot of kinetic energy. To ensure that the damper stays on tight, these bolts include a thicker flat washer, machined perfectly flat to spread the fastening load over a greater surface area. They're manufactured from premium materials for maximum strength and feature a quality finish for good looks.
( 116 )
$5.99
Because all roller cam lobes are ground flat instead of tapered, like hydraulic or solid cams, COMP Cams provides a means of holding the cam back to the rear of the engine. Their cam buttons ride between the front of the timing gear and the back of the front cover and can be shimmed for proper endplay of the cam. COMP Cams makes solid nylon buttons and roller bearing thrust buttons for the ultimate in performance.
( 109 )
$15.95
COMP Cams cam lock plates will keep your cam installed in the right position. Most locking plates come with Grade 8 bolts and have a black oxide finish.
( 64 )
$10.95
Who needs ugly timing cover bolts when you can have a nice chrome set from Summit Racing™? These bolts not only fasten your timing cover, they add to the overall effect of you other chrome accessories.
( 25 )
$5.99
Summit Racing™ offers camlock plate and cam bolt kits for a variety of Chevrolet big block, small block, and LS engine applications from the 1950s and up. These economical locking accessories give you extra insurance and peace of mind when installing a performance camshaft. They include Grade 8 camshaft bolts and a locking plate that locks them into place after they're torqued to spec. Keep your cam and timing gear locked securely together; order the kit recommended for your vehicle.
( 47 )
$2.99
Replace your dingy old timing pointer with one of our Summit Racing™ chrome plated timing pointers. These pointers look great with other chrome accessories, and the easy-to-read graduations will allow you to verify your engine's timing at a glance.
( 67 )
$4.99
—
$5.99
Our Summit Racing™ cam buttons will keep your camshaft from walking back and forth in your block, which can lead to inaccurate timing and premature timing chain wear. The buttons are available in a variety of materials, sizes, and styles. They install with a standard cam bolt locking plate. Order the model recommended for your vehicle and engine application.
( 30 )
$4.99
—
$9.99
The best way to ensure that your oil pump will stay in place is to use ARP oil pump stud kits. They come in your choice of black oxide finished 8740 chromoly or stainless steel, and are rated at 170,000 psi tensile strength.
( 118 )
$5.99
—
$6.99
Melling OEM replacement pushrods are perfect for stock rebuild or mild performance applications where open spring pressures do not exceed 300 lbs. They're manufactured from steel tubing and work well with factory or aftermarket rocker arms. These units are available in a wide range of lengths and other options for fitment on countless makes and models. When you're replacing your valvetrain components, trust Melling pushrods to keep your engine running smoothly.
( 73 )
$1.99
Dress up your engine compartment while keeping oil in its place and the dirt at bay with Summit Racing™ valve cover oil fill caps. They're manufactured from high-quality material, providing a proper fit and seal to prevent oil loss. These round, steel caps are available to fit a variety of applications, including GM, Mopar, Ford, AMC, Jeep, and other make/model vehicles. Whatever your part needs, chances are Summit Racing™ has it!
( 37 )
$4.99
End your camshaft timing worries! High-quality ARP cam bolts have increased preload clamping force to ensure positive timing gear register. Their increased material strength overcomes valvetrain harmonics and stress. These cam bolts have a reduced head size that makes installation and removal easier. They are available in 170,000 psi high performance kits and 190,000 psi Pro series kits.
( 277 )
$5.99
—
$6.99
Available for a wide selection of popular engines, Proform chrome engine oil dipsticks kits consist of both the stick and the tube. These kits have classic hook handles.
( 93 )
$10.99
These Dart adjustable pushrod guideplates are designed to give you the extra flexibility in alignment that you need for cylinder heads with different spacing. They are manufactured from durable steel and install easily with no modifications.
( 18 )
$10.18
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 288 )
$9.99
—
$10.99
Get rid of that boring timing tab and replace it with one of these classic-looking Proform timing tabs. They're sturdily manufactured from quality materials and feature easy-to-read marks for accurate timing. In addition, with their long-lasting good looks, they'll make great additions to any engine.
( 31 )
$4.99
—
$8.95
Melling rocker arms, available for both domestic and import applications, meet or exceed OEM specifications. Depending on the OE design specifications, Melling rocker arms are provided in either stamped or cast materials. Built from only the best materials and manufacturing processes available, they are perfect replacements priced right for your budget. Melling recommends installing new rocker arms with every engine rebuild to assure long engine life and efficient performance. Answer the little knock under your hood with replacement rocker arms from Melling--a supplier of quality engine parts.
( 73 )
$4.99
—
$9.99
Mr. Gasket timing tabs are precision-manufactured and bolt on using your existing timing cover bolts. They're made from quality materials, with a pleasing finish that will complement any engine. They'll work with either factory or aftermarket timing covers, so you're covered either way.
( 49 )
$8.26
—
$10.03
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 116 )
$5.99
—
$6.99
Chevrolet Performance offers an assortment of durable bolts for use on your camshaft installation Choose from among various materials, including steel and chromoly; finishes such as black oxided and natural; lengths, head styles, and thread sizes. These bolts are available for a wide range of engine sizes and camshaft component applications.
( 30 )
$2.99
ATI harmonic balancer bolt kits are comprised of extra-strength chromoly steel bolts that can be used with ATI and other popular dampers. The kits are designed for the balancer to crank attachment to secure the balancer in place and keep it there, even under severe conditions.
( 24 )
$9.49
—
$9.85
Pioneer offers quality new cylinder head dowel pins at an affordable price. These dowel pins are great to have on hand when you do machine work on your block. Pioneer cylinder head dowel pins are made with first-rate materials and are available in a choice of sizes for accurate cylinder head alignment.
( 57 )
$8.99
On Sale
These bolts are made of a Grade 8 alloy and are heat-treated for extra strength. They feature a high hex head to prevent socket slippage and an extra-thick washer to allow for a more accurate, uniform torque.
( 8 )
$15.07
$9.80
Time your engine and dress it up, too, with Spectre performance adjustable timing pointers. They come available for a variety of applications and styles for small block and big block Chevys, as well as big block Chryslers.
( 16 )
$5.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
