Availability
Showing In Stock Items. Show All 58 Items.
These Summit Racing™ block hugger headers will help you to save space and give you the performance that you want. They feature clean welds and precision flanges for accurate and tight seals. The headers come with bolts, gaskets, and reducers. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 169 )
$290.99
—
$351.99
Need a fuel tank? There's only one place to get exactly what you need: Tanks Inc.! They offer a large variety of polyethylene, stainless steel, mild steel, and alloy coated steel reproduction gas tanks in applications set up to fuel many popular vehicles and even a few that are not-so-popular. So, whatever you desire to fit a tank to, be it a street rod, muscle car, classic truck, or that special ride, Tanks Inc. fuel tanks deliver the best quality and fit, blended with their knowledge and expertise, to power your project successfully. NOTE: These are standard stock replacement tanks for carbureted engine applications. If you have retrofitted your engine for electronic fuel injection, please see the Tanks Inc. EFI-Ready Fuel Tank options.
( 403 )
$284.99
—
$319.99
Hedman traditional block hugger headers feature a design that is ideal for factory manifold replacements or engine swap projects that do not have a header designed specifically for that application. Hedman block huggers have an extremely low profile, only Hedman Tight Tubes headers offer more clearance. They are offered in mild steel and stainless steel either coated or uncoated to meet your performance and budgetary needs. The HTC and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging.
( 61 )
$264.99
United Pacific gas tank covers are the perfect replacement for your original equipment needs. Made from stamped 20-gauge steel these tank covers are the same as original, with a wire beaded edge. They are equipped with original contour details and mounting holes, and then coated in EDP black finish for added protection. So, if you have been searching for that factory style look for your vehicle, you don't have to look any further than UPD.
( 1 )
$310.04
Finish off your door with Bob Drake's door scuff plates. These beautiful reproductions are precise copies of the original with the same curves and details to enhance your classic Ford 3-window or 5-window coupe in both appeal and durability. Order the model recommended for your application.
Not Yet Reviewed
$280.99
Patriot Tight Tuck headers provide the solution to many problems associated with engine swaps in modern street rods. They fit in the tightest of engine compartments, and they clear most stock motor mounts. Many Tight Tucks are manufactured from durable 16-gauge tubing and come complete with gaskets, header bolts, and collector reducers. Besides their popular finishes, Patriot also offers a chrome option that is polished before and after assembly for show-quality appearance, as well as a stainless steel option. Order the model designed for your vehicle and engine application. Patriot Tight Tuck finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 55 )
$331.55
—
$474.45
United Pacific bumpers are made of the same high-quality, heavy-stamped steel or stainless steel that adorned your vintage car or truck decades ago. Quality chrome plated or polished for high shine, these replacements are packed in strong boxes to ensure that they're kept in top condition while being shipped. United Pacific bumpers are available in a variety of styles for fitment on specific vehicle applications—dating as far back as 1932.
( 25 )
$345.50
You'll have no more blown gaskets, warped flanges, or header exhaust problems with Sanderson blockhugger headers. They feature a patented, leak-free flange design that works! With over 50 years of American-made know-how, Sanderson Headers have one of the tightest engine block fits available. These hand-assembled headers include flanges that are precision laser-cut from 3/8 in. thick steel plate. A weld bead is built up and ground to a uniform thickness that's so precise, all you'll need is a bead of Permatex Ultra Black gasket maker silicone—no gaskets are required! Plus, these headers afford you that extra bit of clearance needed for complex steering setups and narrow frame rails, while still allowing adequate spark plug clearance. The headers are available in a variety of finishes and sizes for fitment on hundreds of applications.
( 301 )
$442.99
Pete and Jake's Super Bell beam axles provide up to four inches of drop for the front-end of your vintage hot rod. They're cast from 65-45-12 ductile iron for optimum tensile strength and good machinability (should you desire your own modifications or lightweight aluminum). Potential applications include 1928-34 Fords, 1/2-ton Ford pickup trucks up through 1941, and 1935-36 Fords if you split the original wishbones. They accept 1937-48 Ford passenger car spindles. These axles are offered in multiple sizes with a variety of classic features. Get modern performance and that archetypal hot rod look with Pete and Jake's Super Bell beam axles! Offered mix-and-match features: * Drilled for lighter weight/bold look * Filled ends for more strength/beefier look * Chrome finish for a polished look
( 8 )
$445.99
United Pacific offers door latch assemblies for vintage vehicles like 1930s Ford pickup trucks. These replacements are an exact replica of the originals, with precision stampings and OE design mechanism. The assemblies include the inside door handle shaft remote (triangle plate) and remote rod, as well as the receiver for the door lock cylinder. Restoring a classic vehicle entails updating many working parts that have rusted or worn-out over the decades. United Pacific is the source for those hard-to-find components. Order the door latch assemblies recommended for your application.
( 1 )
$256.49
Bob Drake offers fuel tanks for a wide range of Ford vehicles. These steel replacements are available in a variety of sizes and configurations for fitment on specific cars and trucks. Order the model recommended for your application.
( 2 )
$388.99
—
$396.99
United Pacific offers replacement dash panels for a variety of 1932-34 Ford trucks. They're die-stamped with high-quality 18-gauge sheetmetal and feature all of the original contour and mounting details. The panels have a precision-punched center oval opening for original style dash tunnel, plus reinforced steering column mounting holes. Each dash panel is finished with black EDP protective coating to keep your new steel fresh and rust-free.
( 2 )
$374.93
Helix stock height spindles provide precision forged construction for the ultimate in strength and dependability. They meet or exceed OEM specifications, retaining stock factory geometry with precision digital engineering processes, and Helix's updated manufacturing methods ensure spindles can handle stress better than the originals. Choose a pair of spindles designed for your vehicle.
Not Yet Reviewed
$299.95
Do you have a broken door latch on your vehicle? United Pacific door latches are exact copies of the originals for a range of make and models. They're precision-stamped with the factory design mechanism and come in a left or right hand side application to restore door latch function.
( 6 )
$251.81
—
$252.89
Clearance
RJays ladder bar kits are a perfect addition to any street rod. They fit 1928-48 Fords and many other universal applications, including rat rods or drag racers. Built from heavy-wall 7/8 in. DOM steel tubing and TIG-welded with 1/4 in. thick gussets, these ladder bars can handle any horsepower you throw at them—while maintaining a very traditional look. Complete kits are available with dropped or straight crossmembers. All mounting hardware, bushings, clevis, and rear-end brackets are included. Order the model recommended for your vehicle.
( 4 )
$479.99
—
$499.99
$259.50
—
$290.50
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 142 )
$334.95
—
$499.95
AutoLoc Flat-Glass power window conversion kits allow you to convert your old flat-glass windows into a completely new power system. AutoLoc's revolutionary Super Glide window design ensures an easy installation and smooth operation. Each kit comes with high-torque worm-gear driven Bosch motors, reinforced guide tracks, and adjustable window bases, all of which facilitate quick, quiet, and dependable performance for the life of your vehicle. Select the model with the switch and wiring harness options preferred.
( 18 )
$349.95
United Pacific floor pan braces connect the RH and LH sub rail together under the seat. They are made of the same high-quality, heavy stamped steel you would have found in your classic ride decades ago. Black EDP coated to avoid any rust, they're carefully packed in heavy-duty boxes to ensure top-quality products on delivery. If you've got a classic car you're restoring and need new floor pan braces, there's no better place to go than United Pacific.
( 1 )
$279.80
No gaskets, please! Sanderson headers provide the only leak-free flange design that works! Their patented headers stem from over 50 years of performance. And, like your special project that you've upgraded to be better than the original, Sanderson headers are well-crafted and unique to many types of engines for many types of cars—offering you the best fit for your swapped, modified, and accessorized hot rod. They're crafted from 16-gauge steel with precision, laser-cut, 3/8 in. thick flanges. A weld bead is built up and uniformly ground around exhaust ports and bolt holes to such a precise thickness, all that's needed is a bead of Permatex Ultra Black gasket maker silicone. You'll have no more worries of warped flanges and blown gaskets! Choose the style, finish, and fitment tailored for your vehicle. Sanderson handmade performance headers—for your one-of-a-kind build!
( 290 )
$442.99
Patriot Roadster/Sprint Car headers are setting standards in style, quality, and performance for "Fad T" and '32 Hi-Boy headers. They offer T-buckets a choice between their classic or high performance Sprint-style headers for small and big block Chevy, as well as small block Ford engines. And if you want, you can match these headers with Patriot turnouts and integral mufflers for a complete exhaust system. Patriot Roadster/Sprint Car headers are available in a choice of finishes, including a show-quality chrome that is applied to headers that have been polished before and after assembly to assure ultimate chrome quality 360 degrees around all pipes. Additional finishes for Patriot Roadster/Sprint Car headers: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 17 )
$401.95
Patriot full-length chassis and fenderwell headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which results in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 202 )
$313.68
Patriot's Lakester weld-up header kits work great for street rodders and racers who need to build custom headers when a specific fit header is not available for their car. Check out these Lakester-style header kits featuring 16-gauge mild steel tubing and specially designed tapered collector cones. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 4 )
$339.50
Heidts has stabilizer bars for the front and rear of your hot rod and muscle car applications. Constructed from heat-treated steel, these anti-sway bars will help make your ride more stable and combat body roll. You'll feel more in control and enjoy your drive more. Keep the contact between your tires and the winding roads more level with Heidts stabilizer bars.
( 23 )
$300.00
—
$301.00
Rhodes Race Cars roll cage conversion kits are designed to convert your existing roll bar into a 10, 12 or even 14-point roll cage. RRC conversion kits meet or exceed the NHRA and IHRA requirement for roll cage tubing. These kits include roof tubes, windshield post runners, and dash crossmember. Conversion kits may be available in any of the following materials: * 1-5/8 in. x .134 in. wall mild steel tubing * 1-5/8 in. x .120 in. wall DOM tubing * 1-5/8 in. x .083 in. wall 4130 chromoly tubing Note, because of differing driver sizes and main hoop locations, these kits are not notched!
( 6 )
$294.95
—
$414.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
