Summit Bucks

Top Street Performance High Performance Dual Plane Intake Manifolds

Top Street Performance High Performance intake manifolds are dual-plane models ideal for street performance applications. With upgrades throughout, they are designed to improve throttle response, increase your horsepower, and give you more options on the top-end. They are cast from lightweight aluminum with lower profiles and come in multiple finishes for several applications. TSP's dual-plane intake manifold are great additions to any performance engine. Additional provisions: * Ford models have nitrous bosses, a rear water crossover with additional ports, and a square bore carburetor flange * Chevy models have dual distributor hold-downs, 4-corner water ports, and a choke block-off kit

4.0 out of 5 stars ( 2 )

$244.44

—

$333.34

Summit Bucks

Fel-Pro Performance Intake Manifold Gasket Sets

Most Fel-Pro Performance intake manifold gaskets have Printoseal construction, which puts beads of special elastomers around the ports for extra sealing power. They also feature a non-metallic, rubber-fiber base material that resists gasoline and alcohol—and they allow engine builders to precision-trim around the intake ports. These replacement gaskets are available in a variety of materials, thicknesses, and port configurations. Order the set recommended for your vehicle year/make and engine application.

4.72 out of 5 stars ( 1294 )

$13.99

—

$56.99

Summit Bucks

ACDelco GM Genuine Parts Intake Manifolds

ACDelco GM Genuine Parts intake manifolds evenly distribute the incoming air to each of the cylinders. They ensure the proper amount of air is mixed with the proper amount of fuel, and they are GM recommended replacements for your vehicle's original component. They are manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you expect from General Motors.

5.0 out of 5 stars ( 21 )

$70.99

—

$725.99

Summit Bucks

Cold Air Inductions Intake Systems

Cold Air Inductions intake systems have a simple goal--maximizing your vehicle's performance by keeping your intake air as cool as possible! First, every CAI intake is specifically designed and engineered for the vehicle it is sold for, resulting in maximum performance, an easy install, and a perfect fit. Next, their intakes are made of high-quality aluminum--not heat-absorbing plastic. Their intake tubes have a ceramic coating both inside and out to reduce heat soak, as well as to keep radiant heat from penetrating the intake air. And they've applied 3/8 in. thermal insulation inside the air box to prevent heat transfer from the engine bay. Each cold air intake is TIG-welded by hand and powdercoated, plus the air box lids feature a clear viewing window for easier filter inspection. What should a high performance cold air intake system look like? Just like Cold Air Inductions intake systems! Additional features include: * High performance lifetime air filters provide protection with minimal airflow restriction * Black couplers and elbows made from 4 or 5-ply silicone rubber for durability * Entire system meets OEM standards and requirements * Stainless steel clamps and fasteners * Direct replacements for factory air intakes--no tuning required * Everything needed for installation is included * Many systems are available with your choice of near-chrome or textured black powdercoat * Most systems are direct replacements for the OEM air box--no modifications required and the OEM washer bottle is retained in the stock location

4.75 out of 5 stars ( 178 )

$299.99

—

$399.99

Summit Bucks

Top Street Performance Air Gap Intake Manifolds

Producing power and torque comparable to single-plane manifolds, Top Street Performance air gap intake manifolds retain the drivability and throttle response like other dual-planes and perform best between 1,500 and 6,500 rpm. They feature an improved design with additional provisions complemented by an open area under the plenum that ensures less heat transfer from the engine. This means the air/fuel charge will be cooler and produce more power and torque. TSP air gap intakes manifolds are cast from lightweight aluminum with relatively low profiles for great hood clearance and come in multiple finishes and applications.

2.5 out of 5 stars ( 2 )

$288.88

—

$355.56

On Sale

Summit Bucks

Mishimoto Performance Air Intakes

Mishimoto performance air intakes are engineered to be a direct-fit for your vehicle and an excellent upgrade to replace the stock air box. They're guaranteed to boost your automobile's torque and horsepower, and feature Mishimoto's lifetime warranty. The aluminum or silicone tubes are available in a variety of finishes; and an efficient cotton gauze filter is included. Order the model designed for fitment on your vehicle application.

5.0 out of 5 stars ( 1 )

$240.95

—

$2,378.95

$205.95

—

$2,141.06

Summit Bucks

Top Street Performance Dual-Plane Air Gap Intake Manifolds

Producing power and torque comparable to single-plane manifolds, the Top Street Performance dual-plane air gap intake manifolds retain the drivability and throttle response like other dual-planes and performs best between 1,500 and 6,500 rpm. The manifold's improved design is complimented by an open area under the plenum—a feature that ensures less heat transfer from the engine, meaning the air/fuel charge will be cooler and produce more power and torque. These dual-plane air gap intake manifolds are cast from lightweight aluminum and feature a relatively low-profile for great hood clearance. Additional provisions include dual distributor hold-downs, four corner water ports, nitrous bosses, and a square bore carburetor flange.

Not Yet Reviewed

$266.66

—

$288.88

Summit Bucks

Top Street Performance Vortec Intake Manifolds

Top Street Performance Vortec intake manifolds are dual plane, high performance units ideal for street performance applications with a design that improves throttle response, as well as power and torque over a wide rpm range--idle to 5,500. They are cast from lightweight aluminum and feature a low-profile for ideal hood clearance. The TSP Vortec manifolds have additional provisions, including dual distributor hold-downs, 4-corner water ports, and a choke block-off kit. They are set up for spread bore carbs and include an adapter plate and gasket for use with square bore types. Note: As Vortec blocks do not have a water bypass, the manifolds are equipped with a provision to connect to a stock water pump using a 5/8 in. heater hose.

1.0 out of 5 stars ( 1 )

$244.44

Summit Bucks

Top Street Performance Dual-Plane Intake Manifolds

Top Street Performance dual-plane intake manifolds are ideal for street performance applications. Their design improves throttle performance, as well as power and torque over a wide rpm range, from idle up to 6,000. The manifolds are cast from lightweight aluminum and feature a low profile for hood clearance. Order the intake recommended for your year/make and engine application. * Small block and big block Chevy models include dual distributor hold-downs, 4-corner water ports, and a choke block-off kit. Set up for spread bore cars, these manifolds come with an adapte3r plate and gasket for use with square bore types. * Small block Ford models include nitrous bosses, a rear water crossover with additional ports, and a square bore carburetor flange.

Not Yet Reviewed

$241.49

—

$302.22

Summit Bucks

Vance & Hines V02 Falcon Air Intake Kits

Vance & Hines offers V02 Falcon air intake kits for fitment on a wide range of Harley-Davidson© street bikes from 1991 and up. Developed for the performance-minded enthusiast looking for superior bolt-on power and torque, the VO2 Falcon resets the bar for 90 degree intakes with four superb finishes—including show-quality chrome, ceramic matte black, and two eye-catching carbon fiber choices: high gloss traditional weaved carbon and first for the V-Twin world, matte forged carbon. From its slant-nosed oversized filter for higher volume airflow to its precision-machined billet aluminum winged mounting and integrated breather assembly, the clean minimalist design of the VO2 Falcon yields a streamlined hot rod look that is equally powerful in its simplicity as it is in its performance. Order the model designed to fit your motorcycle. Additional details: * Sleek forward-facing 90 degree intake design * Race-proven intake tube available in four finishes: chrome, matte black, weaved carbon fiber, and forged carbon fiber * CNC-machined billet aluminum backing plate, breather stand-offs and flange cover * Integrated breather assembly using 12-point stainless banjo bolts * Washable high-flow slant-nosed conical air filter with stamped Vance & Hines logo * Matched induction module cover on throttle-by-wire models

Not Yet Reviewed

$449.99

—

$749.99

On Sale

Summit Bucks

Mishimoto Intake Boot Kits

Mishimoto intake boot kits are long-lasting solutions to your old, cracked rubber intake boots. They are made from a combination of high-grade silicone and heat-resistant embedded fibers to offer high-quality replacements with lots of service life. Available in black, blue, or red, these silicone hoses retain the stock fitment, while providing increased pressure tolerance. For an ultimate upgrade in performance and style, install Mishimoto intake boot kits.

5.0 out of 5 stars ( 1 )

$87.95

$79.16

On Sale

Summit Bucks

Boost Products USA Aluminum Elbows

Boost Products USA polished aluminum elbows are already beaded to allow an easy connection with silicone hoses. With these mandrel-bent 45 or 90 degree elbows, air charge piping or intakes are easily constructed. The elbows are also very suitable for welding with their 1.5mm wall thickness. They're available in a wide range of lengths, air intake tube diameters and radius sizes.

Not Yet Reviewed

$17.34

—

$69.85

$15.61

—

$62.86

On Sale

Summit Bucks

Put an end to intake manifold leaks with a Fel-Pro intake plenum gasket set. Specifically made to address tough sealing issues, the gaskets help to ensure leak-free performance. These replacements meet or exceed OEM specifications and are available for a wide range of vehicle and engine applications.

4.84 out of 5 stars ( 51 )

$3.99

—

$142.99

On Sale

Summit Bucks

Borne Off-Road Snorkel Air Intakes

Borne Off-Road snorkel air intakes move the fresh air inlet over 20 in. above the stock location, allowing the engine to pull in cleaner air. The precision rotational molded tube is made from durable, UV-resistant cross-linked polyethylene that can withstand the heat of the sun and any debris the trail can throw at it. The top of the snorkels include a 6 in. inlet with a steel mesh cover to protect the intake from large debris, and the inlet can also be swapped for a pre-filter to help keep your main intake filter clean.

Not Yet Reviewed

$596.95

—

$1,161.95

$537.26

—

$1,045.76

Summit Bucks

Fel-Pro Intake and Exhaust Manifold Gasket Sets

Fel-Pro offers intake and exhaust manifold gasket sets for thousands of applications. The composite seals are ideal for stock rebuilds, as well as mild performance engines. Affordable and effective, these replacement gaskets ensure a leak-free connection and a factory-style fit. Order the model recommended for your vehicle and engine family.

4.42 out of 5 stars ( 24 )

$9.99

—

$24.99