Summit Bucks

Manufacturer Rebate

BluePrint Engines 350 C.I.D. Cruiser Base Crate Engines

BluePrint Engines 350 c.i.d. Cruiser base crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 18 inches of vacuum and are designed to work great with power brakes, stock torque converter, stock gearing, and run great on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression ratio: 9.0:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover • Aluminum intake manifold * HEI distributor • 600 cfm Carburetor * Dyno tested results shipped with engine

4.32 out of 5 stars ( 19 )

$5,899.00

Summit Bucks

American Retro 1955-56 Chevy Bel Air 15 in. Steering Wheels

American Retro 1955-56 Chevy Bel Air 15 in. steering wheels are designed to replace the original 18 in. stock GM wheel from vehicles of that vintage. These sporty replacements give your car an original look yet provides drivers with the comfort and handling of a 3 in. smaller diameter modern size wheel, a benefit especially for cars converted to modern power steering. Don't wrestle with that "bus-size" steering wheel any longer! This American Retro new smaller steering wheel is the answer! These steering wheels are made to fit to the original steering column using all the original horn, nuts, and turn signal switch parts. The steering wheel comes complete with a chrome horn ring and a center cap. Installation is easy—just bolt it on! Features: * 15 in. diameter (compared to 18 in. originals) * Original look and feel without the Original size * Fits original and aftermarket GM style tilt steering columns (note: ididit kit #2612100040 needed for tilt) * Uses original horn, hardware, and turn signal switch parts * Sporty and comfortable * Includes chrome horn ring and emblem * Center emblem/logo is interchangeable with stock and reproduction emblem if a more original look is needed * Finished in black—steering wheel can be painted to match your vehicle before installation

4.0 out of 5 stars ( 8 )

$359.00

Summit Bucks

Eddie Motorsports Billet Hood Hinges

Eddie Motorsports billet hood hinges are CNC-machined to perfection from high-quality 6061 T-6 billet aluminum. They provide a stunning alternative to your vehicle's unsightly stock stamped steel hinges and springs. These hinges are enhanced by the included nitrogen-filled gas struts and sealed bearings. Eddie Motorsports billet replacements give your hood outstanding stability and flawless operation that is simply not possible with 40- or 50-year-old stock hinges. The gas struts are made of the highest quality stainless steel for years of uncompromised performance. The struts are available in varying strengths to accommodate all types of hoods--including steel, fiberglass, and carbon fiber.

4.21 out of 5 stars ( 141 )

$525.99

—

$998.95

Summit Bucks

BluePrint Engines GM 400 C.I.D. 508 HP Base Long Block Crate Engines with 6 in. Connecting Rods

Add some real power to your build—BluePrint Engines GM 400 c.i.d. 508 hp base long block crate engines with 6 in. connecting rods. These engine assemblies are built by skilled craftsmen utilizing BluePrint's exclusive designed and manufactured blocks. Their base units come complete with oil pans, valve covers, and front timing covers--letting you finish the engine out, your way, with fuel and ignition systems. They're also balanced, blueprinted, and dyno-tested. BluePrint Engines GM 400 c.i.d. 508 hp base crate engines include: * Cast iron block with 4-bolt mains * Compression ratio: 9.5:1 * Forged crankshaft * 6 in. forged H-beam connecting rods with 150,000 psi rod bolts * Forged pistons * Hydraulic roller cam * BluePrint aluminum heads with 64cc chamber * Dyno test results shipped with engine * 30-month/50,000-mile warranty

Not Yet Reviewed

$9,899.00

Summit Bucks

American Retro 1961-70 Ford F100/1960-63 Falcon 15 in. Steering Wheels

American Retro's 1961-70 Ford F100/1960-63 Falcon 15 in. steering wheels are designed to replace the original 17 in. stock Ford wheel from vehicles of that vintage. These sporty replacements give your car an original look yet provides drivers with the comfort and handling of a 2 in. smaller diameter modern size wheel—a benefit especially for cars converted to modern power steering. Don't wrestle with that "bus-size" steering wheel any longer! An American Retro smaller steering wheel is the answer! It comes complete with a chrome horn ring and a center cap and is made to fit to the original steering column using all the original horn, nuts, and turn signal switch parts. Installation is easy, just bolt it on! Features: * 15 in. diameter (compared to 17 in. originals) * Original look and feel without the Original size * Fits original steering columns * Uses original horn, hardware, and turn signal switch parts * Sporty and comfortable * Includes chrome horn ring and mounting hardware * Center emblem/logo is interchangeable with stock and reproduction emblem if a more original look is needed * Finished in black—steering wheel can be painted to match your vehicle before installation

3.67 out of 5 stars ( 15 )

$359.99

Summit Bucks

American Retro 1957 Chevy Bel Air 15 in. Steering Wheels

American Retro 1957 Chevy Bel Air 15 in. steering wheels are designed to replace the original 18 in. stock GM wheel from vehicles of that vintage. These sporty replacements give your car an original look yet provides drivers with the comfort and handling of a 3 in. smaller diameter modern size wheel—a benefit especially for cars converted to modern power steering. Don't wrestle with that "bus-size" steering wheel any longer! This American Retro new smaller steering wheel is the answer! These steering wheels are made to fit to the original steering column using all the original horn, nuts, and turn signal switch parts. The steering wheel comes complete with a chrome horn ring and a center cap. Installation is easy—just bolt it on! Features: * 15 in. diameter (compared to 18 in. originals) * Original look and feel without the Original size * Fits original and aftermarket GM style tilt steering columns (note: ididit kit #2612100040 needed for tilt) * Uses original horn, hardware, and turn signal switch parts * Sporty and comfortable * Includes chrome horn ring and emblem * Center emblem/logo is interchangeable with stock and reproduction emblem if a more original look is needed * Finished in black—steering wheel can be painted to match your vehicle before installation

4.33 out of 5 stars ( 3 )

$359.00

Summit Bucks

Delphi Mass Airflow Sensors

Delphi mass airflow sensors are the OE parts that your vehicle should have come with! Their MAF sensors are new, not remanufactured, and feature fast response for outstanding performance over a wide range of ambient temperatures. Delphi mass airflow sensors are engineered to provide your ECM with continuous, precise information to ensure optimal performance, fuel economy, and reduced emissions. Give your vehicle new life--replace worn OE parts with Delphi mass airflow sensors.

4.67 out of 5 stars ( 108 )

$67.99

—

$597.99

Summit Bucks

Delphi Fuel Pump Module Assemblies

Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.

4.5 out of 5 stars ( 288 )

$38.99

—

$1,277.99

Summit Bucks

Delphi Ignition Coils

Delphi ignition coils will definitely spark a response! Precise spark timing offers increased fuel economy and faster crank-to-run. These coils provide accurate electrical energy to create a voltage potential at the spark plug—and that provides you with superior engine performance, better control over emissions, and fuel economy. You'll get the OE performance, durability, and electromagnetic capacity level that your vehicle requires with Delphi ignition coils. Order the model designed for your vehicle application.

4.64 out of 5 stars ( 89 )

$20.99

—

$269.99

Summit Bucks

Timbren Suspension Enhancement Systems

Timbren Suspension Enhancement Systems resolve your suspension problems. Timbren SES kits will improve your load-handling, make it easier to haul heavy loads, and eliminate sag and sway. They're easy to install and maintain! Simply bolt on the kit—no drilling, no air lines to route—and you're ready to roll with high performance and peace of mind. The patented Aeon hollow rubber springs cushion and absorb road shocks and automatically adjust to uneven loads and road conditions. You'll enjoy improved roll stability and reduced sway, unlike with the mediocre trailer suspensions and softer ride quality of today's trucks and trailers. Your truck, van, and SUV are designed for best performance under ideal road and load conditions—but in the real world, to tackle the imperfect, you need a Timbren Suspension Enhancement System. Order the kit designed to fit your year, make, and model application.

4.64 out of 5 stars ( 209 )

$269.36

—

$667.99

Summit Bucks

American Retro 1978-87 Chevy and GMC Truck 15 in. Steering Wheels

Upgrade your squarebody interior with the American Retro 1978–87 Chevy and GMC truck 15 in. steering wheel, engineered to deliver a true factory look with modern driving comfort and control; replacing the original 16 inch wheel, this 15 inch reduced diameter design provides improved handling, added legroom, and a more responsive feel—especially beneficial for trucks equipped with power steering—while maintaining the classic styling your build deserves. Designed for a direct fit, it bolts onto original or aftermarket GM style steering columns and reuses factory horn, hardware, and turn signal components for quick, hassle free installation, while the included horn button and mounting hardware ensure everything you need is in the box. Featuring a sporty yet period correct design and an interchangeable center horn button for stock or custom appearance, this steering wheel delivers the perfect balance of vintage authenticity and modern drivability, making it an ideal upgrade for restorations, restomods, and daily driven classic trucks alike.

Not Yet Reviewed

$359.99

On Sale

Summit Bucks

FUELAB Prodigy Variable Speed Brushless Fuel Pumps

FUELAB Prodigy fuel pumps work to keep your fuel cool. Their variable-speed operation helps to avoid fuel vaporization, allowing them to be run in continuous-duty operation for street or strip usage. They feature billet aluminum construction with an anodized finish, along with a unique housing shape for extremely quiet operation and steady pressure. The pumps use a lightweight, super-efficient DC brushless motor to reduce current draw; plus, carbon 9-vane construction with a low-mass, pressure-balanced rotor for high-speed reaction to changes in speed and flow; powerful, high-flux density neodymium rare earth magnets; and an internal variable-speed controller. FUELAB Prodigy fuel pumps work with 12 V or 16 V electrical systems and are compatible with gasoline, diesel, methanol, and ethanol fuels.

4.33 out of 5 stars ( 9 )

$649.00

—

$1,116.00

$584.10

—

$1,004.40

Summit Bucks

Summit Racing™ Pro Ring Filers

Summit Racing™ Pro piston ring filers are designed for professional use and engine builders looking for accurate and affordable equipment. With a powerful 110 V or 220 V motor, the machines make quick work of even the toughest steel rings. The precision table action allows a full sweep across the griding wheel face for even wear and no unexpected highs or lows. This enables you to hit your target .001 in. clearance with a minimum of back and forth between the cylinder bore and reduce the chance for mistakes. Each Pro filer also includes a deburr wheel. The machines come in a wide variety of colors, including premium 2-stage candy finishes to match your shop equipment. They are designed and built in the USA with American-made materials.

4.71 out of 5 stars ( 28 )

$759.99

Summit Bucks

Delphi Fuel Injectors

Delphi fuel injectors are engineered with an accurate, controlled spray pattern that reduces emissions and improves cold-start capabilities. These replacement injectors have a recessed fuel exit and no internal seal rings—in order to minimize leakage and possible puddling. Delphi fuel injectors are durable, dependable, and offered for a wide variety of applications. Order the OEM stock replacements designed for your vehicle.

4.55 out of 5 stars ( 11 )

$42.99

—

$881.99

Summit Bucks

American Retro 1965 Chevy Nova/1966 Deluxe C10 Truck 15 in. Steering Wheels

American Retro 1965 Chevy Nova/1966 Deluxe C10 Truck 15 in. steering wheels are designed to replace the original 17 in. stock GM wheel from vehicles of that vintage. These sporty replacements give your car an original look yet provides drivers with the comfort and handling of a 2 in. smaller diameter modern size wheel—a benefit especially for cars converted to modern power steering. Don't wrestle with that "bus-size" steering wheel any longer! American Retro's new smaller steering wheel is the answer! These steering wheels are made to fit to the original steering column using all the original horn, nuts, and turn signal switch parts. The steering wheel comes complete with a chrome horn ring and a center cap. Installation is easy—just bolt it on! Features: * 15 in. diameter (compared to 17 in. originals) * Original look and feel without the Original size * Fits original and aftermarket GM style tilt steering columns (note: ididit kit #2612100040 needed for tilt) * Uses original horn, hardware, and turn signal switch parts * Sporty and comfortable * Includes chrome horn ring and mounting hardware * Center emblem/logo is interchangeable with stock and reproduction emblem if a more original look is needed * Finished in black—steering wheel can be painted to match your vehicle before installation

5.0 out of 5 stars ( 1 )

$359.99

Summit Bucks

Center Line Auto Drag 2.0 Brushed Wheels

Auto Drag 2.0 wheels are Center Line's classic muscle car wheel, re-engineered for greatness. Through improved engineering and enthusiast input, the fresh 2.0 variant delivers a new level of undisputed performance, durability, and Center Line history to your ride. The 2-piece cast aluminum rims feature a brushed finish. They're offered in multiple widths, bolt patterns, and other fitment options. (Also available with a satin black finish.)

4.23 out of 5 stars ( 13 )

$349.99

—

$376.00

Summit Bucks

American Retro 1960-66 Chevy and GMC Truck 15 in. Steering Wheels

American Retro 1960-66 Chevy and GMC Truck 15 in. steering wheels are designed to replace the original 17 in. stock GM wheel from vehicles of that vintage. These sporty replacements give your car an original look yet provides drivers with the comfort and handling of a 2 in. smaller diameter modern size wheel—a benefit especially for cars converted to modern power steering. Don't wrestle with that "bus-size" steering wheel any longer! American Retro's new smaller steering wheel is the answer! These steering wheels are made to fit to the original steering column using all the original horn, nuts, and turn signal switch parts. The steering wheel comes complete with a chrome horn ring and a center cap. Installation is easy—just bolt it on! Features: * 15 in. diameter (compared to 17 in. originals) * Original look and feel without the Original size * Fits original and aftermarket GM style tilt steering columns (note: ididit kit #2612100040 needed for tilt) * Uses original horn, hardware, and turn signal switch parts * Sporty look and comfortable feel * Includes chrome horn ring and mounting hardware * Center emblem/logo is interchangeable with stock and reproduction emblem if a more original look is needed * Finished in black—steering wheel can be painted to match your vehicle before installation

5.0 out of 5 stars ( 1 )

$359.99

Summit Bucks

Delphi Camshaft Position Sensors

These Delphi camshaft position sensors feature a digital output design for maximum signal to noise ratio. They are not impacted by temperature changes and provide long-lasting sensor protection. These Delphi camshaft position sensors are also manufactured to meet or exceed OE requirements to ensure quality and long-lasting durability.

2.73 out of 5 stars ( 15 )

$12.99

—

$134.99

Summit Bucks

Delphi Engine Crankshaft Position Sensors

Delphi engine crankshaft position sensors exceed OE requirements and undergo certified electrical testing. They feature enhanced sensing functionality that delivers reduced emission, improved reliability, and superior drivability. Delphi engine crankshaft position sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. Choose Delphi for the OE replacement parts that your car was born with.

4.0 out of 5 stars ( 17 )

$12.99

—

$124.99

Summit Bucks

American Retro 1958-60 Chevy Impala 15 in. Steering Wheels

American Retro 1958-60 Chevy Impala 15 in. steering wheels are designed to replace the original 18 in. stock GM wheel from vehicles of that vintage. These sporty replacements give your car an original look yet provides drivers with the comfort and handling of a 3 in. smaller diameter modern size wheel—a benefit especially for cars converted to modern power steering. Don't wrestle with that "bus-size" steering wheel any longer! This American Retro new smaller steering wheel is the answer! These steering wheels are made to fit to the original steering column using all the original horn, nuts, and turn signal switch parts. The steering wheel comes complete with a chrome horn ring and a center cap. Installation is easy—just bolt it on! Features: * 15 in. diameter (compared to 18 in. originals) * Original look and feel without the Original size * Fits original and aftermarket GM style tilt steering columns (note: ididit kit #2612100040 needed for tilt) * Uses original horn, hardware, and turn signal switch parts * Sporty and comfortable * Includes chrome horn ring and emblem * Center emblem/logo is interchangeable with stock and reproduction emblem if a more original look is needed * Finished in black—for other colors, steering wheel can be painted to match your vehicle before installation

Not Yet Reviewed

$359.00

Summit Bucks

American Retro 1960-65 Deluxe Chevy and GMC Truck/1959-60 Bel Air 15 in. Steering Wheels

American Retro offers original-style steering wheels in a modern 15 in. diameter. Their 1960-56 Custom Deluxe Chevy/GMC truck/1959-60 Bel Air steering wheels replace the original 17 in. stock wheels, providing a sporty replacement with the comfort and handling of a 2-in. smaller diameter wheel—especially beneficial for vehicles converted to power steering. Don't wrestle with that "bus-size" steering wheel any longer! American Retro's new smaller steering wheel is the answer! Features: * 15 in. diameter (compared to 17 in. originals) * Original look and feel without the original size * Fits original and aftermarket GM-style tilt steering columns * Uses original horn, hardware, and turn signal switch parts * Includes chrome horn ring and center cap

5.0 out of 5 stars ( 2 )

$359.00

Summit Bucks

American Retro 1964-65 Chevy Chevelle 15 in. Steering Wheels

The American Retro 1964-65 Chevy Chevelle 15 in. steering wheels are designed to replace the original 17 in. stock GM wheel from vehicles of that vintage. These sporty replacements give your car an original look yet provides drivers with the comfort and handling of a 2 in. smaller diameter modern size wheel—a benefit especially for cars converted to modern power steering. Don't wrestle with that "bus-size" steering wheel any longer! American Retro's new smaller steering wheel is the answer! These steering wheels are made to fit to the original steering column using all the original horn, nuts, and turn signal switch parts. The steering wheel comes complete with a chrome horn button and mounting hardware. Installation is easy—just bolt it on! Features: * 15 in. diameter (compared to 17 in. originals) * Original look and feel without the Original size * Fits original and aftermarket GM style tilt steering columns (note: ididit kit #2612100040 needed for tilt) * Uses original horn, hardware, and turn signal switch parts * Sporty and comfortable * Includes chrome horn ring and emblem * Center emblem/logo is interchangeable with stock and reproduction emblem if a more original look is needed * Finished in black—steering wheel can be painted to match your vehicle before installation

4.75 out of 5 stars ( 4 )

$359.99

Summit Bucks

American Retro 1969-72 Chevy Comfort Grip 15 in. Steering Wheels

American Retro 1969-72 GM Comfort Grip-style 15 in. steering wheels handcrafted from teak wood with rosewood accents and a brushed stainless steel frame. Comfort Grip models also include horn button, hub, and hardware. Notes: * Fits original and aftermarket GM style tilt steering columns * Each wheel is unique and just as the originals wood color will slightly vary

Not Yet Reviewed

$429.99

Summit Bucks

Delphi Idle Air Control Valves

Add Delphi fuel injection idle air control valves to control the airflow into your engine. Delphi OE replacement valves provide a superior fit and finish that result in an easier installation for you. Their idle air control valves meet federal emissions regulations, increase your fuel efficiency, and eliminate the potential for malfunctions. Get control over the amount of air allowed to flow into your engine, and your engine idle speed, in a variety of load conditions when you replace your air control valves with Delphi fuel injection idle air control valves.

4.61 out of 5 stars ( 41 )

$37.99

—

$161.99