Availability
Summit Bucks
Russell stainless steel braided fuel hose kits are quality-engineered to replace stock fuel hoses and come to you complete and ready to run. Their stainless steel outer braid is built tough to resist abrasion and corrosion and the kits are designed with anodized aluminum hose ends. Best of all, they easily connect to OE components for a very professional and reliable installation that lasts!
( 30 )
$21.95
—
$59.95
Summit Bucks
These Russell ProClassic II dual fuel inlet kits feature an all-black, nylon fiber braided outer cover over a chlorinated polyethylene (CPE) synthetic rubber inner line for abrasion resistance. The CPE inner liner incorporates a bonded, multi-braid stainless wire that improves the bend radius with less possibility of collapsing when the routing hoses are in tight areas. They are safe for use with fuel, oil, and antifreeze. To complement this new hose, the ProClassic II dual fuel inlet kits also feature aluminum black anodized hose ends. If a high-quality, traditional looking hose is what you're seeking, Russell ProClassic II dual fuel inlet kits are the answer.
( 9 )
$54.95
Summit Bucks
Russell's dual fuel inlets for Holley and Demon carburetors are fully assembled and ready for installation. They feature stainless steel braided hose construction with anodized AN fittings and fuel bowl washers.
( 35 )
$54.95
Summit Bucks
These Russell stainless steel fuel line kits suitable for Honda®/Acura® come complete and ready to run. They feature Russell stainless braided hose and anodized aluminum hose ends. The kits are designed to replace the pressure line between the fuel rail and fuel filter. Their stainless steel outer braid resists abrasion and corrosion, offering maximum protection and reliability. Their CPE synthetic rubber liner with a nylon inner braid is compatible with all hydrocarbon and alcohol-based fuels.
( 1 )
$54.95
Summit Bucks
ACDelco GM Genuine Parts fuel feed lines are GM-recommended replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. These original equipment lines will provide the same performance, durability, and service life you expect from General Motors. Order the model designed to fit your application.
( 5 )
$21.99
—
$53.99
Summit Bucks
Bore wear at the compensator feed regulator valve allows critical pressure loss that prevents proper clutch timing and control, resulting in harsh shifts, bind-up, and possibly, burnt clutches. You can recover hydraulic control and renew shift performance by installing a Sonnax compensator feed regulator valve kit. These kits featuring a Sonnax drop-in Zip Valve provide you with valve, spring, sleeve, and retaining clip to restore normal compensator action. Features and benefits: * Hardcoat anodized aluminum valve combats premature wear * Highly wear-resistant aluminum sleeve provides additional valve support * Includes calibrated spring for restoring OE compensator pressure * Drop-in Zip Valve parts install quickly and easily
Not Yet Reviewed
$38.44
Summit Bucks
Sonnax actuator feed limit valve kits eliminates problems with the OE AFL valve design in GM 4L60-E, 4L65-E and 4L70-E units. OE designs have a large reaction area and are highly affected by side loading which wears the valve body bore, resulting in lower oil pressure to the shift solenoid and lower line pressures. Sonnax kits include a redesigned AFL valve and a wear-resistant sleeve to regulate pressure and re-establish proper pressure control. The hardcoat anodized aluminum valve features annular grooves to prevent side loading and has 54 percent more support by operating in the full contact sleeve. Sonnax kits include valve, sleeve, spring, and retaining clip.
( 1 )
$37.81
Summit Bucks
ACDelco offers fuel injection fuel feed and return pipe fittings for a variety of applications, including select late model supercharged Chevrolet and GMC models. These replacement parts are manufactured from quality materials and tested to meet GM Original Equipment standards. They're tailored to stock specifications to ensure precise fit and long-lasting performance. Order the fittings recommended for your vehicle.
Not Yet Reviewed
$37.99
Summit Bucks
When it's time to change the fuel lines on your vehicle, look to ACDelco for GM-recommended replacements—including fuel feed, vapor, and return hose assemblies. The lines are available in a wide range of sizes, materials, and configurations for fitment on countless vehicles from the 1990s and up. Order the model designed for your application.
( 8 )
$20.99
—
$52.99
Summit Bucks
ACDelco offers heater hoses for virtually any vehicle from the 1940s and up. These replacements are available in a wide array of sizes and configurations—for hundreds of hose connection positions. They're designed to original factory specs to ensure fit and performance. Order the hoses recommended for your applications.
( 32 )
$50.99
Summit Bucks
ACDelco Gold turbocharger intercooler hoses will fit directly onto your intercooler and engine without any modifications. They connect the piping or turbocharger to the intercooler or engine. These replacement hoses are available in a variety of sizes, configurations, materials, and finishes. Order the model that best suits your application.
Not Yet Reviewed
$48.99
Summit Bucks
Keep oil flowing to and from your turbocharger without issue with GM Genuine Parts turbocharger oil lines from ACDelco. Made from quality materials these parts are designed, engineered, and tested to rigorous standards. For OE quality parts, go with the brand you can trust—ACDelco GM Genuine Parts.
Not Yet Reviewed
$39.99
Summit Bucks
ACDelco GM Genuine Parts vapor canister lines are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These original equipment lines will provide the same performance, durability, and service life you expect from General Motors. Service your vehicle with the parts it was born with; choose ACDelco GM Genuine Parts.
Not Yet Reviewed
$35.99
Summit Bucks
ACDelco fuel vapor lines are ideal replacements for corroded, rusted, or damaged originals. They're made to exact factory specifications and include replacement fittings. The lines are available in a variety of sizes, materials, and configurations. Order the model recommended for your vehicle.
( 4 )
$52.99
Summit Bucks
GM 6L45, 6L50, 6L80 and 6L90 automatic transmission units may exhibit multiple line pressure and cooler/converter/lube flow problems due to excess wear in the pressure regulator bore. Deterioration at the balance spool end allows critical fluid loss, resulting in high line pressure, harsh shifts, and overheating due to reduced cooler/converter flow. Wear at the outboard spool robs converter feed pressure and lowers line pressure, resulting in soft shifts and burnt clutches. Installing a Sonnax pressure regulator valve kit restores the hydraulic integrity of these circuits for proper line pressure control in all ranges. A new pressure regulator valve outer spring is also included to replace weakened original springs and provide a modest 5 psi increase across the pressure curve. Additional details: * Hardcoat anodized aluminum valve combats premature wear * Lengthened critical spools operate in non-worn portion of bore for added stability and wear prevention * Annular grooves help center valve in bore to reduce future side-load wear * Drop-in Zip Valve parts install quickly and easily Kit contents: * Valve * Spring * Drill bit .040 in. * 2 checkballs (1 extra)
( 2 )
$24.99
Summit Bucks
Sonnax throttle valve plunger kits address the poor line rise or no detent downshifts that can be common complaints in vehicles with a stock overdrive transmission. The steel plunger continuously reciprocates within the aluminum sleeve, wearing out the sleeve. This wear (plus the weak OE spring) allows throttle valve feed oil to leak past the plunger and exhaust, resulting in the aforementioned issues that can lead to 3-4 clutch failure. Sonnax throttle valve plunger kits include an improved throttle valve spring designed to properly maintain higher line pressure and improved throttle valve performance. Order the kit recommended for your transmission application. Features and items: * High-quality aluminum sleeve prevents wear * Tight-tolerance sleeve and plunger restore hydraulic integrity * Eliminates the part throttle sleeve orifice * Spring * Sleeve * Plunger
( 2 )
$41.99
—
$45.87
Summit Bucks
Continuous oscillation in relay valve and sequence valve bore causes wear that prevents proper hydraulic control. You can recover hydraulic control and renew 2nd and 4th gear operation by reconditioning the entire bore and installing a Sonnax oversized 4-3 sequence valve kit. These kits address wear on the inboard two spools that is increasingly more common in aging valve bodies. Wearing at these spools can allow valuable 4th servo feed leakage, resulting in no 4th and 2-4 band wear, and can also allow leakage of 2nd clutch oil needed to apply the 2-4 band in 2nd gear, resulting in poor 2nd gear shifts. Leaking at the OE end plug also allows oil loss that can leave 4th gear inoperable. Sonnax oversized 4-3 sequence valve kits feature hardcoat anodized aluminum valves to combat premature wear and O-ringed end plugs to help prevent 4th gear oil loss. Kit contents: * 3-4 relay valve * 4-3 sequence valve * Spring * End plug * Two O-rings (1 extra)
Not Yet Reviewed
$51.20
On Sale
Summit Bucks
Boost Products USA silicone air duct hoses can be used for brake ventilation, interior ventilation, suction hose, or for air supply to the air filter. These cold air feed flexible ducting pipe hose/ventilation hoses are equipped with an outer skin of special extremely durable and hard-wearing, orange-colored silicone, complete with outer fiber reinforcement and inner bronze-coated steel spiral spring, for maximum strength but extremely low weight. Boost air duct hoses are 6 ft. in length and offered in several diameters in black or red.
Not Yet Reviewed
$46.06
—
$51.82
$41.45
—
$46.64
Summit Bucks
Clearance
ACDelco diesel emission fluid system components help your DEF system to continue operating properly. Available for most applications, ACDelco offers most major components in the system, including modules, level sensors, caps, heaters, feed lines, and tanks. Order the replacement parts recommended for your application.
Not Yet Reviewed
$43.99
$21.50
—
$44.99
Summit Bucks
GM 6L45, 6L50, 6L80 and 6L90 units may exhibit multiple line pressure and cooler/converter/lube flow problems caused by excess wear in the pressure regulator bore. Deterioration at the balance spool end allows critical fluid loss, resulting in high line pressure, harsh shifts and overheating due to reduced cooler/converter flow. Wear at the outboard spool robs converter feed pressure and lowers line pressure, resulting in soft shifts and burnt clutches. Installing this Sonnax pressure regulator valve kit restores the hydraulic integrity of these circuits for proper line pressure control in all ranges. A new pressure regulator valve outer spring is also included to replace weakened original springs, providing a modest 5 psi increase across the pressure curve. Features include: * Hardcoat anodized aluminum valve combats premature wear * Lengthened critical spools operate in non-worn portion of bore for added stability and wear prevention * Annular grooves help center valve in bore to reduce future side-load wear * Replacement spring provides modest 5 psi line pressure increase * No pump drilling required * Drop-in Zip Valve parts install quickly and easily * Note: Pump must be removed to install kit. This kit replaces the original Sonnax pressure regulator valve kit 104520-14K. Kit contents: -- Valve -- Spring -- Checkball
Not Yet Reviewed
$23.61
Summit Bucks
ACDelco Specialty fuel hoses are low-permeation, premium hoses for your fuel feed and return, PCV and EEC systems. They are approved for use with leaded and unleaded gasoline, diesel, bio-diesel, E-85, methanol, ethanol, and gasohol fuels. They are equipped with a patented 5-layer technology that keeps fuel out of the environment while delivering peak fuel efficiency. ACDelco Specialty fuel hoses have oil, heat, ozone, and abrasion-resistant covers. They are available in multiple sizes and lengths to accommodate any project.
( 1 )
$34.99
—
$53.99
Summit Bucks
ACDelco GM Genuine Parts include a wide range of diesel emission fluid system components—including filler pipes, filters; fluid heaters, pumps, and tanks; clamps, gaskets, control modules, feed lines, sensors, and more. These replacement parts are manufactured from original materials and specifications to ensure proper fit and performance. Order the diesel emission fluid system components recommended for your application.
Not Yet Reviewed
$43.99
Summit Bucks
ACDelco GM Genuine Parts engine coolant sensors are a GM recommended replacement component for many vehicles on the road today. These original equipment engine coolant sensors are manufactured to fit your GM vehicle, providing you the same performance, durability, and service life you expect from General Motors.
( 69 )
$35.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
