Availability
Summit Bucks
ACDelco GM Genuine Parts rack and pinion assemblies convert the rotation of your steering column to the side-to-side motion needed to steer your front or rear wheels. These assemblies are genuine GM recommended replacements for your vehicle's original components. They have been manufactured to fit your GM vehicle offering you with the same performance, durability and service life you have come to expect from General Motors.
Not Yet Reviewed
$1,511.99
—
$1,890.99
Summit Bucks
Sonnax Smart-Tech input housing kits address the weak areas of 4-speed automatic transmissions. Flexing and bowing of OEM and other aftermarket backing plates is eliminated with Sonnax's heavy-duty bolt-on anchoring plates. Their unique design ensures even clamping of the 3-4 clutches in higher horsepower, higher pressure applications. By eliminating the 3-4 snap ring and using a thinner, yet stiffer apply plate, space is made available for additional frictions and steels. This makes it possible to simultaneously increase clutch torque capacity and eliminate the possibility of retaining ring blow-out. A steel reinforcement sleeve prevents breakage in the spline area. Housing fatigue/failure-resistance and housing life are significantly improved with a special treatment process that greatly reduces stress crack formation.
( 4 )
$1,537.27
Summit Bucks
Failure of the intermediate stub shaft and direct drum are almost inevitable when transmissions are pushed to the limit. To maximize durability and improve clutch capacity in heavy-duty/performance vehicles, Sonnax offers Smart-Tech direct clutch drum and shaft kits, the first upgrade to eliminate every critical weakness. Most failures in these units occur where the direct drum and stub shaft connect. Even other aftermarket upgrades that rely on a heavy-duty shaft will sheer in this area under extreme conditions. Unlike two-piece assemblies, the all-in-one Smart-Tech easily handles the highest horsepower/torque levels. The unique one-piece clutch drum with integrated stub shaft is precision machined from high-strength steel to guarantee there are no splines to strip from the drum or weaken the shaft. The shaft itself is significantly thicker and 2 times stronger than the original. Due to its larger diameter, the integrated shaft must be used with the kit's custom, heavy-duty sun gear. Insufficient holding power is another area where many transmissions fall short, but installing thinner aftermarket steels and backing plates to increase clutch capacity isn't ideal. Those components increase clutch pack flex and heat build-up, making them the primary cause of repeat burn-up. To improve both performance and long-term reliability, the Smart-Tech's custom drum and piston hold an OE backing plate and seven OE frictions for 17 percent more clutch capacity than the six-friction stack-up. Sonnax Smart-Tech direct clutch drum and shaft kits feature: * One-piece design that eliminates weak point where drum splines strip and shafts break * Rugged shaft is 50 percent thicker and twice as strong as OE * Custom drum and piston deliver 17 percent more clutch capacity with optimum protection against burn-up * High-strength drum and shaft are precision-machined from hardened 8620 steel * Unique sun gear is precision-machined from 9310, heat-treated steel
( 1 )
$1,537.27
Summit Bucks
Don't take chances with old or questionable relays that can leave you stranded. ACDelco replacement relays are designed to exceed OEM specifications for accurate, maintenance-free operation. Trust your vehicle's needs to ACDelco.
( 16 )
$1,600.99
Summit Bucks
ACDelco offers a variety of genuine factory replacement components for OEM superchargers—including covers, gaskets, and more. These parts will help to renew the efficiency and power of your unit, because they're developed by the same team that created your vehicle. Why risk poor fit and subpar performance parts from another brand? ACDelco GM Original Equipment components ensure proper fit and performance.
( 2 )
$1,999.99
On Sale
Summit Bucks
Summit Racing™ Performance turbochargers have the latest in compressor aero technology with quick-spooling, yet free-flowing turbines. Starting with 66mm inducer sizes and working up to 79mm, the SUM-2600 Series turbos are reliable and a great value. The SUM-2700 Series are true race turbos starting at 76mm and go up from there. T4, T6, and V-band turbine housings are available. These are specially designed, balanced, and precision assembled in North America for class leading racers. They feature 2618 billet forged compressor wheels that offer superior flow and dependability at high boost.
( 7 )
$1,699.99
$1,589.99
—
$1,594.99
Summit Bucks
Keep your classic "real" with Real Deal Steel quarter panels. When you need more than skins or lower halves, these perfect, original reproduction panels will give your Chevy restoration authentic style and a genuine fit. They are made from heavy-gauge steel, and many are finished with either a black EDP primer or a silver weld-through primer for you to begin work on. Make your choice Real Deal Steel quarter panels and make your build a true, timeless classic.
( 3 )
$1,800.99
Summit Bucks
Based on an ultra-durable, one-piece forging, Sonnax Smart-Tech input shaft and piston kits have a hub with longer front clutch splines. Combining longer splines with a thinner billet aluminum direct piston allows for one extra OE thickness direct friction plate, while keeping original thickness steels, backing plate, original retaining ring and OE clutch clearances.
( 1 )
$1,836.30
Summit Bucks
Get the General Motors quality you know and trust with ACDelco GM Genuine Parts brake rotors. By staying with the parts brand your GM vehicle came with, you'll have peace of mind that the fit and performance are up to the original specifications and high standards. These replacement disc brake rotors are engineered for virtually every make and model of GM car, light duty truck, and sport utility vehicle; order the parts recommended for your application.
( 36 )
$1,724.99
Summit Bucks
Give yourself a competitive edge with the Race Series AT-2 exhaust systems from Yoshimura. These exhaust systems are designed with nothing but power in mind—and the sound of the Alpha-T 2 exhaust systems are absolutely unmistakable Yoshimura! Each Race Series exhaust system is developed in accordance with noise compliance regulations imposed by most racing sanctioning bodies worldwide. In addition, the Race Series AT-2 exhaust systems' "Works Finish" takes on a unique coloring after it goes through a heat cycle on the motorcycle that looks much like those titanium works components that Yoshimura's factory racers use. One look at a Yoshimura Race Series AT-2 exhaust system—plus, its sweet exhaust note, you know it's something special! Key features and benefits: * All applications are marked with appropriate EPA noise emissions labels * Noticeable gains in max horsepower and max torque * Sheds weight compared to stock exhaust * Stainless steel construction with aggressively styled carbon fiber end cap and uses a facet-formed tip matte carbon fiber heel guard * Yoshimura "Works Finish" for lasting durability; uniform heat coloration really gives the system a titanium look when it's been through a 15-20 minute heat cycle * For closed course competition only; not intended for street use; has not been tested for EPA noise compliance
Not Yet Reviewed
$1,509.00
—
$1,699.00
Summit Bucks
Pay for what you need and get the quality you want--Sonnax planetary assemblies allow you to choose your level of performance. Their extreme assemblies offer the very best for the most demanding applications with advanced process sun and pinion gears. The 3-step process--cryogenic tempering, shot-peening, and super finish--develops gears with improved grain structure and stability, so they are tougher, more wear-resistant, and better performing. Extreme assemblies are available in four ratios, two flange tooth counts, and two output shaft lengths. Performance, quality, and value--Sonnax extreme planetary assemblies deliver them all. Sonnax extreme assemblies may feature: * Gear ratios: 1.80, 1.69, 1.58, 1.65 * 9310 advanced process sun and pinion gears * 12-tooth or 24-tooth billet clutch drum flange * HY-Tuf or 300M rolled spline long OE or short output shafts * High-strength, steel-backed, PTFE thrust washers * Maximum-duty ring gear
Not Yet Reviewed
$1,664.88
—
$1,696.76
Summit Bucks
ACDelco offers a variety of differential carrier replacement components to help return your carrier to optimum performance. From small parts like bushings and plugs, to larger components like pumps and housings, these replacements are designed to factory specs for original fit and function.
( 3 )
$1,601.99
Summit Bucks
Live large and make your mark on the boulevard! When you want to add the big spin to your 1955-57 Chevy, wider wheel well tubs are the first step to expanding your wheelbase. Real Deal Steel can help you broaden your wheel wells by 2 5/8 in. inboard, allowing the use of up to 13 in. wide tires (when used with a rear spring pocket kit, sold separately). If you want wider wheels and tires with the appearance of normal wheel wells, rely on Real Deal Steel--your "go to" guys for classic Chevy fabrication.
( 4 )
$1,807.99
Summit Bucks
GM Genuine Parts ABS modulator valves from ACDelco are designed, engineered, and tested to rigorous standards, and are backed by General Motors. This valve controls the flow of brake fluid into your brakes, providing the critical anti-lock feature. Over a hundred models are available for fitment on countless vehicles from the 1990s and up. Order the modulator valves recommended for your application. (GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles.)
( 1 )
$1,697.99
Summit Bucks
ACDelco offers a full line of GM Genuine Parts turbochargers. These stock replacements help to force more air into internal combustion engines, creating more power with each piston stroke. The turbos are crafted from alloy iron to fit each vehicle application. A gasket/seal is included, and no programming is required. Whether you drive a Chevy, Buick, GMC, or Cadillac, there's an OE model ready to restore the power you're missing. Maintain your ride with a GM Genuine Parts turbocharger from ACDelco.
( 2 )
$1,642.99
—
$1,995.99
Summit Bucks
ACDelco offers GM Genuine Parts oil pan replacements for a wide range of cars, trucks, vans, and SUVs. They're available in steel or aluminum, in different sizes, styles, and configurations for stock fitment. Some models also include gaskets and hardware. These parts are designed, engineered, and tested to rigorous standards—backed by General Motors. Order the OE direct-fit oil pan recommended for your vehicle.
( 2 )
$1,634.99
Summit Bucks
ACDelco GM Genuine Parts automatic transmission valve bodies are GM-recommended replacements for your vehicle's original components. These valve bodies act as a hydraulic brain, directing hydraulic fluid to different channels within the valve body in order to perform your vehicle's gear changes. The original equipment valve bodies are manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 1 )
$1,620.99
Summit Bucks
ACDelco offers stock replacement steering shafts for a variety of applications. These GM-recommended parts will reduce friction and provide the same performance, durability, and service life you've come to expect. Replace your worn steering shaft to improve steering feel and maintain smooth shaft movement. Order the model designed for your vehicle.
( 1 )
$1,729.99
Summit Bucks
ACDelco GM Genuine Parts remanufactured rack and pinion assemblies convert the rotation of your steering column to the side-to-side motion needed to steer your front or rear wheels. These assemblies are genuine GM recommended replacements for your vehicle's original components. Remanufacturing the rack and pinion assemblies is an industry standard practice that involves disassembly of the existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they preform to ACDelco specifications. In addition, remanufacturing returns parts back into service rather than processing them as scrap or simply disposing of them. These original equipment remanufactured rack and pinion assemblies are built provide the same performance, durability, and service life you expect from ACDelco.
Not Yet Reviewed
$1,546.99
—
$1,666.99
Summit Bucks
ACDelco ABS control modules meet or exceed OEM part specifications to help them deliver the same fit and performance as your factory equipment. ABS modules read the data from your speed sensor and send the correct pressure to each wheel, enabling you to maintain steering control and stop quickly under most conditions. Hundreds of models are available for vehicles from the 1990s and up. Select the replacement ABS control module recommended for your application.
( 2 )
$1,655.99
—
$1,777.99
Summit Bucks
ACDelco driveshafts are designed to replace your factory originals with no modifications. They're manufactured from quality materials and have the stock connections for an easy bolt-in fit. These driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 6 )
$1,502.99
—
$1,688.99
Summit Bucks
ACDelco new torque converters are GM OE replacements that offer the same performance, durability, and service life you've come to expect. With quality steel housings and internal components, ACDelco torque converters are sure to deliver the performance and fit needed for your vehicle.
( 1 )
$1,726.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
