Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
6 Results Found For "bearings"
Showing In Stock Items. Show All 8 Items.
Summit Bucks
DRP Performance Premium Low Drag Bearing Kits
DRP Performance offers premium low drag bearing kits for a wide range of applications, including many Ford, Chevy, and Pontiac cars from the 1960s, '70s, '80s, and '90s. Low drag hub components reduce friction and lower temperatures, making your wheels spin easier, delivering more horsepower to the track—all while reducing maintenance and making your race car faster. Enhance your performance on oval track asphalt, oval track dirt, drag racing, road racing, and street applications. Kits include a DPR bearing spacer, DRP Premium Super finished Bearing Kit, and DRP Ultra low drag seal. Here are details on each component: * DRP Bearing Spacer: A difference you can feel—in the pits and on the track. Bearing spacers make the most difference of any low drag hub upgrade. Properly installed, these spacers will provide an immediate increase in hub free spin, an improvement large enough to feel just by pushing the car around. And the benefit doesn't stop there. Bearing spacers make the most difference when a side load (cornering force) is applied. Drivers have commented on how much faster a car with bearing spacers free rolls when entering and through the center of the corner. Bearing spacers simplify and reduce hub maintenance. Spindle nut torque is no longer sensitive. In fact, with spacers installed, you can tighten the spindle nut as much as you want without overtightening the bearings. (DPR recommends 20-40 lbs.-ft.) Bearings will run cooler and do not need to be repacked as often. Bearing spacers are simple to install. DRP bearing spacers have a threaded adjustment, allowing the user to quickly set bearing end play or preload. A set-screw locks the spacer at the desired adjustment. Once installed, they do not need to be readjusted unless you replace the hub or bearings. Bearing spacers are used in virtually every application in professional motorsports. * DRP Premium Super finished Bearing Kit: Reduce bearing temperature by over 100 degrees F verses stock bearings! Increase free spin by over 250 percent! DPR starts with premium quality bearings and puts them through a super finishing process. This process removes the grind marks and greatly smooths the surface of the bearing roller, while leaving a "hatch" pattern to retain grease. Quality wheel bearings will last the life of most racing applications. * DRP Ultra Low Drag Seal: …billet aluminum, full PTFE sealing lip, reusable, great for any application: dirt, asphalt, road race, street Decrease seal drag by over 1,000 percent! Air gap seals create an "air curtain" to keep debris out and eliminate drag completely! DRP Ultra Low Drag hub seals are true, purpose-built, high performance seals. The housing is made from lightweight aluminum. The sealing element is a special PTFE blend, giving it natural low friction qualities. Seals are reusable. Order the kit recommended for your vehicle.
Not Yet Reviewed
$122.80
—
$247.64
Summit Bucks
Denso Air Conditioning Compressors
Denso air conditioning compressors are all-new units built to meet Denso's unsurpassed reputation for technological superiority. As one of the world's largest OE suppliers of A/C compressors, Denso units are specified by most major vehicle manufacturers. They're manufactured and tested to the strictest OE standards for unparalleled performance. Denso brings together everything they know as an air conditioning systems manufacturer to deliver the highest quality line of factory-new compressors available. When it comes to new compressors, you can't do better than going with a unit manufactured by the OE supplier. Denso knows these units better than anyone because they originally designed them. Hundreds of models are available—for applications from the 1980s and up. Order the model recommended for your vehicle. Additional features of Denso air conditioning compressors include: * Denso First Time Fit provides the right part and the right fit ... the first time, every time * Snap rings improve performance under extreme heat * Thrust bearings built to withstand tension and stress for maximum durability * Valves and shafts designed with lightweight aluminum alloy for added strength * OE-specified O-rings and seals compatible with both R12 and R134a refrigerants * Factory O-ring installation kits prevent leakage and ensure proper installation * PTFE surface-treated pistons for smooth, efficient operation * Lightweight aluminum alloy swash plates for added strength * Includes the proper OE specified oil
( 30 )
$168.99
—
$249.99
Summit Bucks
Denso Remanufactured Alternators
Denso alternators are not only original equipment on many of the world's top production cars; they are a favorite in motorsports as well, where their light weight, high-efficiency, and durability make them the natural choice. Denso remanufactured alternators go through a grueling process; stators and rectifiers are tested to 300 V, while rotors are submitted to 600 V, to ensure reliable performance. Rotor slip rings are buffed to an 8 micron surface finish, with run out limited to 20 microns, minimizing brush wear and abrasion. Bearings are validated to OE standards and loaded with premium OE-specification lubricants. Offered in wide range of amp ratings for hundreds of specific vehicle applications, all alternators meet Denso's rigorous First Time Fit standards. Contemporary vehicles employ dozens of sophisticated electronic systems, placing heavy demands on the charging system. The alternator is no place to cut corners. Additional features of Denso remanufactured alternators include: * Meet or exceed all manufacturer standards, and provide years of reliable service * First Time Fit provides perfect mounting with no belt/pulley alignment issues * Housings re-tapped and damage-checked for heat warping, corrosion, or improper surface alignment * Voltage regulators 100 percent tested to OE standards * All hardware stripped and replated * Premium cores and precise OE-assembly benchmarks * Designed to meet grueling heat and electrical requirements * OE-quality fit and appearance * Full compatibility with sensitive electronics systems
( 43 )
$106.50
—
$249.99
Summit Bucks
Denso Remanufactured Starters
Denso remanufactured starters are subjected to a rigorous test and replacement routine that produces the lowest return rates in the replacement aftermarket. And every starter is exactingly bench-tested to ensure factory-original performance. Remanufactured components offer tremendous value, and by recycling valuable parts and precious raw materials, they're the environmentally responsible choice as well. Denso First Time Fit remanufactured starters are the ideal choice. Key features and benefits of Denso remanufactured starters include: * Solenoid coil 100 percent voltage tested. * All terminal bolts replated or replaced with copper to ensure a clean source of electrical current * Commutator polished, gauged, and performance tested * Housing re-tapped to OE standards and damage-checked for heat warping, corrosion, or improper surface alignment; then refinished * Pinion gear inspected and replaced as needed to meet engineering specifications * Field coil inspected and high-voltage tested * Armature cleaned and high-voltage tested to ensure reliable performance * All-new bearings, brushes, and seals * Maximum cranking torque under all conditions * Designed to start in extreme cold and hot weather conditions
( 21 )
$101.99
—
$248.99
Summit Bucks
Dunlop K81/TT100 Tires
In 1969, the K81s became the first tires to lap the Isle of Man TT course at over 100 mph on a production bike ... and the rest is history. Dunlop K81/TT100 tires are specially designed tires that are popular for the restoration of older British bikes and others to original specs. They bear the same unmistakable Dunlop style, but benefit from ever-evolving tire development to bring lightweight and classic bikes a traditional tire with cutting-edge performance and durability. The KK81/TT100 tires are H-speed rated and feature an aggressive tread pattern with a continuous center groove to ensure straight-line drivability. Plus, perfectly angled deep grooves offer excellent dry and wet road traction.
( 1 )
$152.99
—
$161.99
Summit Bucks
Arroyo Tamarock M/T Tires
The Arroyo Tamarock M/T tires offer several benefits, particularly for off-road and mud-terrain performance. They feature aggressive tread blocks for enhanced grip in wet, muddy, or snowy conditions, and self-cleaning grooves to eject debris, ensuring consistent traction. The Arroyo Tamarock M/T tires also boast a silica compound for flexibility and all-weather traction, along with a rigid center block for damage resistance. Key features: * The rugged tread blocks and aggressive silica compound provide excellent grip in various conditions, including mud, rain, and snow * Solid square shoulder increases the contact area between tread and ground greatly, improves the grip and bearing capacity of wet and dry road, making more stable driving * Aggressive sidewall design helps protect the casing from damage caused by stones and impacts and enhances grip when in deep mud or rock climbing * Despite this tires aggressive tread pattern, they are designed for a quiet and comfortable ride on paved roads * Excellent driving performance, the optimum ratio of rubber and void on the tread and the special stepped edge treatment removal of dirty under extreme off-road conditions effectively * The flat footprint and ideal tread design allow for consistent contact with the road surface, improving steering responsiveness and handling * Water and snow drainage performance—the wide and deep pattern groove design enhances the anti-skip performance of tires under rainy and snowy road greatly
Not Yet Reviewed
$232.99
