Automotive Ignition & Electrical Supplies at Summit Racing

PerTronix Ignitor® Solid-State Ignition Systems

PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.

4.65 out of 5 stars ( 1006 )

$26.49

—

$594.04

PerTronix Ignitor Lobe Sensor Solid-State Ignition Systems

PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems

4.7 out of 5 stars ( 209 )

$112.60

—

$281.62

On Sale

MSD Pro 600 CDI Ignition and High-Output Coil Kits

When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. MSD Pro 600 CDI ignition kits with high-output coils answer this need. The Pro 600 CDI ignitions provide unrivaled spark energy and dependability. They have built-in protection for accidental reverse battery connection, over temperature protection, and LED diagnostics that can identify an issue with individual coils should a problem arise. They also feature a programmable power setting to allow racers to switch between 250 to 400 millijoule outputs, or the industry-leading output of 680 millijoules via an activation wire or software, meaning that you can turn it down for the long haul and then set it to kill mode at the strip, making the Pro 600 ideal for a Drag Week-style car and really any no-compromise vehicle. Perfectly complementing the Pro 600 ignition box in these MSD kits are high-output 8280 ignition coils, replacing the extremely capable 8232 coils used in the 8-channel capacitive discharge ignition kits. Available in red or black, the 8280 coils have the goods to back up their aesthetics with increased peak spark current, overall spark energy, and greater thermal efficiency. Designed for coil-near-plug engine management systems, the PRO 600 is also capable of easily converting any distributor-type ignition into a coil-near-plug system. Additional features and specifications: * Eight outputs of up to 680 millijoules of energy * All necessary wiring harnesses included * Continuous 600 millijoules operation without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kV output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 V minimum required for starting and running * 12 V minimum required for 600 millijoules operation * Maximum operating voltage of 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power * Fits most coil-per-plug engines up to eight cylinders (including four and six cylinders) * Approved for NHRA Pro Mod Class

Not Yet Reviewed

$2,561.95

$2,304.95

PerTronix Ignitor II® Solid-State Ignition Systems

Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used

4.34 out of 5 stars ( 295 )

$141.07

—

$644.03

Lingenfelter TRG-002 58x-24x Crank Sensor Trigger Conversion Modules

Lingenfelter TRG-002 58x-24x crank sensor trigger conversion modules have been designed using the latest automotive qualified components with extended temperature range operation. A fast 16-bit microcontroller with an enhanced timer system is utilized to achieve precise signal timing for late model GM engine applications. The Lingenfelter TRG-002 conversion modules allow Gen IV GM V8 engines with the 58X crankshaft trigger wheel and the 4X camshaft timing gear to be installed in earlier vehicles designed to accept the 24X crankshaft trigger wheel and the 1X camshaft trigger wheel--without having to take the engine apart to change the camshaft timing gear or the crankshaft reluctor wheel.

4.67 out of 5 stars ( 33 )

$303.99

PerTronix Ignitor III® Solid-State Ignition Systems

These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.

4.51 out of 5 stars ( 84 )

$171.97

—

$289.90

Digi-Tails LED Taillight Conversion Panels

Digi-Tails LED taillight conversion panels are much more visible than your standard taillights. These light panels contain high-intensity, wide-angled LEDs that are strategically positioned to maximize light output and fully optimize your lenses. Each light panel is custom engineered to fit the vehicle's housing precisely. Features and details include: * Fully sequential LEDs light up in a fluid, sweeping pattern * Allows switching between standard light and fully sequential * Includes LED boards and wiring * Includes components for both left and right sides on vehicle * Use of LED flasher recommended (sold separately)

4.38 out of 5 stars ( 68 )

$189.00

—

$309.00

Proform Mopar Licensed Electronic Distributor Conversion Kits

Proform Mopar Licensed electronic distributor conversion kits are complete high performance packages that will convert your old point-type ignition to a new electronic ignition. Proform kits are made entirely from new, not rebuilt components. Order the model designed for your vehicle make and engine application. Kits include: * Prominently displayed retro-style Mopar logo * Magnetic pickup-type distributor with mechanical and vacuum advance * Electronic control unit box, wiring harness, and ballast resistor * Black female socket-type distributor cap * Detailed installation instructions

4.39 out of 5 stars ( 44 )

$180.95

On Sale

ACCEL Points Eliminator Conversion Kits

ACCEL points eliminator ignition conversion kits utilize specialized electronic circuitry and an infrared signal to stabilize ignition timing from 1 to 10,000 rpm and offer more accuracy. Put an end to your old-school high-maintenance system with the ACCEL points eliminator conversion kit designed for your application. More product features include: * Reduces maintenance by eliminating the need to change points * Improved performance and fuel efficiency * Latest thermal, clad-based surface-mount construction for maximum dependability * Easy to install with simple hand tools

4.06 out of 5 stars ( 51 )

$111.95

$91.56

—

$116.95

PerTronix Ignitor II® Lobe Sensor Solid-State Ignition Systems

PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger

4.68 out of 5 stars ( 31 )

$138.71

—

$247.62

Sierra Marine Delco EST Conversion Kits

Sierra Marine Delco EST conversion kits upgrade GM engines with conventional ignition systems to electronic. They are offered for 4-, 6-, and 8-cylinder engines. Sierra Marine Delco EST kits include: * Delco EST (Electronic Spark Timing) distributor * Coil * Ignition wires * Harnesses

5.0 out of 5 stars ( 3 )

$489.99

—

$508.99

On Sale

MSD Direct Ignition Systems

The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition

4.0 out of 5 stars ( 5 )

$2,049.95

$649.95

—

$1,843.95

On Sale

Mallory Unilite Breakerless Ignition Conversion Kits

Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.

3.33 out of 5 stars ( 6 )

$152.95

—

$176.95

$100.16

—

$137.65

Morimoto Projector Headlight Conversion Harnesses

Morimoto projector headlight conversion harnesses are designed to adapt the 2009+ Dodge Ram projector-style headlights onto trucks that came standard with the basic dual halogen headlamps. The harnesses enable you to upgrade to the most modern Ram look without cutting, splicing, or modifying anything on the truck's factory harness. It's a seamless plug-and-play solution to keep your low and high beams under control on the new OEM projector lights using the original controls inside the cabin. The outputs will plug directly into the multi-pin connector on the back of each headlight from Dodge. Note: These adapters are tested and work on OEM/TYC headlights. At this time, they do not work on DEPO aftermarket headlights.

5.0 out of 5 stars ( 2 )

$94.00

On Sale

Mallory E-Spark Conversion Kits

These Mallory E-Spark conversion kits are just what you needed to replace those old points and update your ignition system. They eliminate the pesky problem of constantly having to change and adjust points. These kits include all parts that fit inside the stock distributor cap, so everything is self-contained and looks original from the outside.

4.37 out of 5 stars ( 27 )

$163.95

$147.55

—

$163.95

American Autowire Breakerless Se Ignition Systems

American Autowire Breakerless Se ignition systems are made with the highest quality materials to ensure long-lasting durability and performance. They are designed to operate with early model GM vehicles. If it's time to update or upgrade your ignition system, American Autowire Breakerless Se ignition systems are the way to go.

4.57 out of 5 stars ( 21 )

$213.75

Summit Racing™ One-Wire Alternator Conversion Kits

Our Summit Racing™ one-wire alternator conversion kits will give your engine compartment a much cleaner look. These kits include a new voltage regulator, brush holder, hardware, and easy-to-follow instructions.

5.0 out of 5 stars ( 11 )

$47.99

Morimoto OEM LED Conversion Harnesses

Morimoto OEM LED conversion harness H129K is designed to adapt the 2017-19 Ford F-250 LED headlights onto trucks that came standard with base H13 dual halogen headlamps. This wiring harness kit allows you to upgrade to the most modern Super Duty look without cutting, splicing, or modifying anything on the truck's factory harness. * PLUG-N-PLAY: This wiring harness kit is a seamless solution to keep your low and high beams under control on the new OEM LED lights using the original controls inside the cabin. The outputs plug directly into the multi-pin connector on the back of each headlight from Ford. * ADVANCED: The unique Morimoto relay harness is designed to retain full function of the OEM headlight just like it came from the factory. No hiccups, no flickering, no problem! * OEM GRADE: Aside from being ahead of the game from a technical standpoint, the Morimoto HD relay harness is also a work of art. With its wiring protected by abrasion-resistant Techflex mesh sleeving and its extruded aluminum relay shell that's been anodized and laser-engraved, the MotoControl harness will look factory fresh under the hood!

3.0 out of 5 stars ( 2 )

$368.00

FAST XR-i Points-to-Electronic Ignition Conversion Kits

Tired of setting your points, or hitting that magical point at higher RPM where they seem to float, costing you power and performance? It's time to pull out those ancient contacts and benefit from modern day, digital technology with FAST XR-i Points-to-Electronic Ignition Conversion Kits. The XR-i is a compact module that bolts directly in place of the breaker point assembly. It simply triggers from the factory cam lobe, making installation a breeze with only two wires to connect. The microcontroller of the module manages the signal and dwell time in the coil to produce a much higher output spark that will improve the performance and drivability of your classic as well. Another great feature is a built-in adjustable rev limiter to protect your engine in the event of driveline failure or a missed shift. Features include: * Increased spark output for improved drivability * Pinpoint accurate timing * Better fuel mileage * Faster and more reliable engine starts * Digital and maintenance free * Fully sealed from moisture and dirt * Adjustable rev limiter can be set from 4,000 to 8,000 RPM

2.67 out of 5 stars ( 24 )

$86.95

—

$149.95

FAST XR3000 Points-to-Electronic Ignition Conversion Kits

FAST XR3000 ignitions convert your points to an electronic ignition. They feature an all-new status LED light for easy diagnostics and 150 percent greater spark gap energy over stock points ignitions. They use a high-output coil without a ballast resistor, an optical trigger for precise ignition timing accuracy, and are fully sealed for protection against dirt, moisture, and vibration.

5.0 out of 5 stars ( 2 )

$187.95

Scott Drake LED Sequential Taillight Kits

Scott Drake LED sequential taillight kits give your stock lenses and housings modern signaling. With patented "Smart-Signal" technology and an exclusive "Batwing" design, Scott Drake sequential taillights offer a hassle-free installation--no splicing is required. The LEDs are up to five times brighter than your stock bulbs and they run cooler and use less energy. And, you don't need not buy anything extra, because they work with your factory pieces! Get sequential lighting for your classic Mustang with LED taillight kits from Scott Drake.

3.94 out of 5 stars ( 16 )

$267.95

—

$409.95

Sierra Marine Electronic Ignition Conversion Kits

Sierra Marine electronic ignition conversion kits replace the points and condensers for true solid state ignition performance. The kits quality components meet or exceed the original equipment parts they replace, and are engineered to meet today's high horsepower engine demands while withstanding the harsh marine environment. For quality parts for your boat repair and maintenance, Sierra is dedicated to protecting your investment. Order the conversion kit suited to fit your application needs. Electronic ignition conversion kit features: * Uses standard coil, cap and rotor * Easy to install, one-piece, 2-wire hook-up * Accurate to within 1/4 degree timing accuracy 0 to 6000 rpm range Note: Before ordering, please verify this is the correct kit to suit your specific application requirements.

Not Yet Reviewed

$154.99

PerTronix Replacement Electronic Distributor Conversion Magnets

These PerTronix replacement electronic distributor conversion magnets will help you keep your ignition firing accurately. They are available for all engine types and are manufactured from quality materials.

4.38 out of 5 stars ( 8 )

$25.60

—

$120.78

ACDelco Ignition Conversion Kits

Old ignitions systems become worn down and really impact the performance of your vehicle. ACDelco ignition conversion kits are not only designed to restore original performance, but also update your vehicle to a newer style ignition. With these newer ACDelco ignitions, you'll experience better throttle response, better fuel mileage, and have an overall better running engine. Each kit includes everything needed to update the ignition—such as modules, plates, and even the grommets. Check your specific application for items included for your vehicle.

Not Yet Reviewed

$201.99