Availability
Summit Bucks
Many Sonnax clutch hubs are designed for the extra-duty requirements of drag racing with Powerglide and other GM transmissions, for instance. Machined from a high-quality medium carbon steel forging, most hubs will accept five friction discs for the added load capacity needed in high horsepower race cars. All splines and thrust surfaces are precision-machined to exacting tolerances, and the unique lube hole pattern is designed to reduce drag on the friction discs in low gear. Sonnax clutch hubs are also available with or without lightening holes to reduce rotational weight.
( 16 )
$112.99
—
$135.23
Summit Bucks
Sonnax slip yokes are forged, not cast, for greater strength, and they undergo a precision-machining process to guarantee exceptional balance and minimal runout. They are 100 percent leak-tested, the seal plug is O.D. ground for superior seal, and yokes are air-tested to 40 psi. Sonnax slip yokes are available in different lengths and tooth counts to fit your specific transmission application.
( 108 )
$178.27
—
$305.44
Summit Bucks
Sonnax SmartShell heavy-duty reaction shell kits prevent damage to the rear planetary assembly, as well as providing a reinforced shell. Stripped or cracked shells in GM 4L60, 4L60-E, 4L65-E and 4L70-E units are a common problem, but strengthening the shell alone does nothing to address the equally common problem of preventing thrust loads from overwhelming rear captured planetery bearings. From daily jobs to extreme builds, the Sonnax SmartShell heavy-duty reaction shell kits are the only way to prevent shell failure and protect the bearing.
( 21 )
$124.62
Summit Bucks
Sonnax input carrier kits transform OE wide-ratio automatic transmissions into a close ratio for game-changing acceleration on the track. Manufactured and engineered for outstanding durability, these kits keep your engine in the optimal power band, while allowing a longer pull in first and second gears, improving consistency and performance. The input carrier gears are precision-ground to OE standards and feature thrust washers with a highly wear-resistant, PTFE-coated material, plus a thicker captured bearing. Lube channels direct oil to the pinion pins, and the carrier can be disassembled for inspection and service. Stay in the power band with Sonnax input carrier kits.
( 3 )
$855.99
Summit Bucks
Sonnax heavy-duty reaction shaft kits are universal to fit all years and all input carriers. Reaction shafts used in high-torque applications, and especially in heavy vehicles, suffer from two common issues that require replacement. The splines that engage the rear planet can twist and the splines that engage the ring gear wear. OE and other aftermarket versions are made from lower strength, plain carbon steel. Sonnax heavy-duty reaction shaft kits are made from high-strength chromoly steel alloy to eliminate spline twist and spline wear. Contents include: * Reaction shaft with bushings * Reaction shaft-to-shell bearing * Reaction shaft-to-front carrier bearing * Shim
( 5 )
$217.22
Summit Bucks
Sonnax Smart-Tech drum modules for racing GM TH400 transmissions improve on-track performance and consistency, leading to quicker ETs, more wins, and greater reliability. The TH400 is preferred for its overall durability and multitude of available ratios, but is known to be heavier and less efficient than the popular two-speed Powerglide. Part of the TH400 inefficiency results from the fact that the direct drum counter-rotates, spinning backwards in 1st gear, brakes to a complete stop on the 1-2 shift, then goes from 0 RPM to input RPM on the 2-3 shift. Significant energy is wasted through this cycle that robs power, upsets traction on the shifts, and contributes to broken internal parts. Compared to aluminum direct drums, the Smart-Tech drum module reduces the weight of the counter-rotating components by over 3.3 lbs.! And more significantly, because the weight of the Sonnax counter-rotating parts is closer to the centerline, there's a 68 percent reduction in energy required to stop and restart during the 1-2 and 2-3 shifts. The benefits are increased wheel horsepower, better acceleration, less shock on the shifts, and improved durability. * Complete kit (34555-01K) replaces both forward and direct drums and includes everything from intermediate sprag to the pump; a selection of Sonnax input shafts is available separately. * 100 percent new content, no used core pieces * Includes larger-diameter, 36-element sprag and sprag race that works with OE intermediate clutches * Includes six-friction forward clutch pack and seven-friction direct clutch pack Contents: * Forward Piston Housing * Forward Piston * Forward Piston Return Springs (16) * Forward Spring Retainer * Forward Snap Ring * O-Ring 1.674 in. * Lip Seals (2) * Direct Housing Assembly * Direct Piston * Direct Piston Return Springs (26) * Direct Spring Retainer * Direct Snap Ring * O-Ring 2.737 in. * Sprag Shaft * Front Sprag Retainer Plate * Heavy-Duty Sprag 36 Element * Outer Sprag Race * Rear Sprag Retainer Plate * Sprag Retainer Screws (4) 6-32 x 5/16 in. * Quad Ring Seals (2) * Anti-rotation Seal Rings (2) * Drum * Pressure Plate * Outer Snap Rings (4) * Bearing Small * Forward Clutch Hub * Bearing Large * Direct Clutch Hub * Steel Clutch Plates (4) .060 in. * Steel Clutch Plates (11) .077 in. * Friction Clutch Plates (13) .080 in. * Clutch Separators (60) .103 in.
Not Yet Reviewed
$3,052.40
Summit Bucks
Sonnax Super-Hold servo kits offer increased apply area over the OEM servo for more holding force between shifts. They are manufactured from anodized aluminum and include mounting seals and hardware for your specific transmission model. Their improved seal design will conserve pump volume.
( 25 )
$91.85
—
$220.21
Summit Bucks
Sonnax automatic transmission case bushings are made to locate the carrier output shaft assembly. These bushings are a direct OE replacement. Sonnax automatic transmission case bushings are made from high-quality materials and is a required part in any high-quality rebuild.
( 14 )
$58.94
Summit Bucks
Sonnax heavy-duty intermediate overrun clutch outer races eliminate weak points. Race failure is a chronic problem with high-torque loads causing race fractures at two stress points: the radial lube holes and the sharp inside corners at the base of the outer splines. Sonnax outer races are engineered with offset lube holes so rollers never travel directly over the holes, and they are spaced so only one roller is ever positioned near a hole, radically reducing the risk of fracture. Other design improvements to the splines, plus upgraded material and a custom manufacturing process, further improve durability, doubling the torque capacity over any OE or other aftermarket races. Sonnax heavy-duty intermediate overrun clutch outer races are direct replacements offering unrivaled reliability at any power level.
( 3 )
$101.10
Summit Bucks
A bad governor will result in a sudden loss of upshift. Sonnax automatic transmission governors will restore proper function on select automatic transmissions. Their governor gears are excellent replacement components and they are made of premium materials to provide a precise fit with OE quality and function for long-lasting performance.
( 20 )
$151.05
—
$170.21
Summit Bucks
GM 6L80 and 6L90 transmissions often suffer failure of the 4-5-6 clutch assembly due to flexing and bowing of the backing plate (coning)—especially when your clutch-apply pressures exceed OE specifications. Sonnax clutch backing plates are designed to minimize flexing/bowing when the clutch is applied, drastically reducing the likelihood of clutch plate distortion. Their stiffer backing plate design outperforms OE and aftermarket plates.
( 8 )
$50.44
—
$132.87
Summit Bucks
Main shaft failure is a common problem in performance and heavy-duty GM TH400, 4L80-E and 4L85-E units. Sonnax replacement heavy-duty main shafts are manufactured from high-strength 300M with proprietary heat treatment and post heat-treat processing for exceptional performance, durability and value. These shafts are recommended for applications up to 1,000 hp. Additional details: * Advanced torsional design with spline and cross hole refinements for additional strength * Direct replacement for OE shafts
Not Yet Reviewed
$425.28
Summit Bucks
Sonnax heavy-duty automatic transmission clutch hubs eliminate hub failure. These overrun clutch hubs feature high-strength steel and thicker material for trouble-free performance when applying deceleration engine braking in D3, D2, or D1 ranges. Ready your transmission for high performance applications, such as autocross, with Sonnax heavy-duty clutch hubs. Additional info: * Two times thicker than OE clutch hubs to prevent cracking and breaking in critical areas that engage the input sprag inner race * Manufactured from high-strength 4140 chromoly steel
( 2 )
$236.88
Summit Bucks
Sonnax case saver retainers are designed for 1999 and later GM 4L80-E units—and are the only intermediate clutch retaining ring case saver that allows the intermediate band to be retained. The case savers fit over the intermediate band anchor lug inside the case and extends rearward to support the intermediate clutch backing plate retaining ring, preventing case lug blow-out. Over the years there have been a variety of case saver designs, however, all required eliminating the intermediate band, as is often done in drag racing trans-brake applications. Only Sonnax case saver retainers support the intermediate clutch retaining ring yet are thin enough to allow the intermediate band to be installed to provide case lug protection in all applications.
( 5 )
$35.99
Summit Bucks
Sonnax knows you want your transmission to shift like a dream. Their automatic transmission bands are extra-wide intermediate bands suitable for heavy-duty, commercial, and 4x4 vehicles. These drop-in replacements provide 15 percent more holding capacity and feature a 60 percent thicker case anchor, decreasing the chance of band failure under severe conditions. (Note: The red-lined version of these Alto bands is designed for high-torque street racing applications. The Kevlar®-lined version is too aggressive for street use and best suited for high performance racing applications.)
( 8 )
$46.93
—
$49.46
Summit Bucks
No weak link! Sonnax heavy-duty one-piece input shafts are custom-forged from one solid piece of ultra-high-strength 300M steel. Much better than the weak OE 2-piece shaft/hub design, this single piece delivers a more robust build that will work hard longer. With durability and performance features which are second to none; your only choice should be Sonnax heavy-duty one-piece input shafts.
Not Yet Reviewed
$440.14
—
$454.61
Summit Bucks
Wear at the piston pin bore surface can result in poor shift quality and burnt clutches and bands. Sonnax pinless accumulator piston kits prevent pin bore leakage. They're also longer to stabilize the piston and prevent piston cocking. They feature dual seals to stabilize and completely seal the bore, and steel balls to plug the existing pin bore. Fluid loss through the piston pin bore will no longer be an issue when you invest in Sonnax piston kits.
( 17 )
$10.86
Summit Bucks
Get in the right gear with Sonnax shift levers. These replacement levers and kits are designed to work with most competition-type shifters—without modifications to the case. Sonnax offers a choice of one-piece and bolt-together levers; many include O-rings on the shafts to prevent leakage, and all are zinc plated for corrosion protection. Upgrade your stock shifter levers with replacements from Sonnax.
( 14 )
$25.79
—
$37.59
Summit Bucks
Sonnax Sure Cure automatic transmission rebuild kits are a comprehensive reconditioning package—featuring the best Sonnax products developed to help mechanics restore and enhance transmission performance. Sure Cure components are the same Sonnax parts sold individually to resolve common valve body complaints, as well as other transmission problems. The high-quality components in each Sure Cure kit will repair worn areas and protect the transmission against future damage. Plus, each kit comes with an easy-to-read, step-by-step installation guide that covers inspection and repair of the most critical areas of the valve body. Additional features and benefits: * Restore shift quality and reduce comebacks * Repairs biggest trouble areas to reduce comebacks * Includes step-by-step instructions for comprehensive valve/pump body restoration Kits Include: * Shims (2) endplay * Pump slide pivot pin * Throttle valve plunger valve kit * Shortened TV link * TV cable corrector kit * Seals D-ring servo * 1-2 or 3-4 accumulator spring * Servo release check valve kit * Reverse boost valve kit * Oversized pressure regulator valve * Pinless 1-2 or 3-4 accumulator piston kit * TV boost valve kit * Bushing pump * Bushing rear stator support * Checkballs
( 6 )
$159.78
Summit Bucks
Sonnax thrust bearings are replacements for your worn automatic transmission bearings to aid in smooth operation and noise reduction. The bearings act as a guide to help limit any axial movement which can hinder performance. Manufactured to exceed OE specifications for superior quality even under extreme conditions, order the Sonnax thrust bearings best suited for your application.
( 4 )
$5.99
—
$18.47
Summit Bucks
The Sonnax adjustable rear servo pin kit 34912-01K replaces GM TH400 and '95-earlier 4L80-E servo pins. OE pins have seven different lengths to allow for adjustment of the Low/Reverse band—but are no longer available from GM. The Sonnax pin kit has an adjustment range that covers the five longest OE pins to allow for accurate setting of the Low/Reverse servo piston travel. The pin features an O-ring groove to prevent leakage of line pressure past the case pin bore. Kit contents: * Servo Pin * Screw * (4) Small washers * (1) Large washer * (2) O-Rings
( 2 )
$31.29
Summit Bucks
When standard OE pins just won't do, use Sonnax extra-long Servo pin and seal kits to get the job done right! The Sonnax 4L60/4L60-E servo pin is longer than the longest OE pin. The pins extra length simplifies adjustment, eliminating the need for having to add length to the pin, itself. The Servo pins are made from chromoly steel, so they're durable for high performance applications as well as stock replacement. Dual PTFE seals have been added to improve sealing in the case bore and as well as an O-ring to improve sealing between pin and the 2nd gear Servo. The kits include pin, PTFE seals and an O-ring seal.
( 5 )
$38.16
Summit Bucks
Sonnax TV cable corrector kits are prevent the TV cable from being pulled out of adjustment at full throttle--by allowing the spring to compress and absorb any excessive cable pull. On most GM and Ford transmissions with cables, the throttle valve cable pulls out of adjustment at wide-open throttle. This is typically caused by inaccurate geometry of the throttle shaft lever. There should be a specific degree of movement of the attachment element pivot point between closed and wide-open throttle; and a specific distance between the pivot points of the attachment element and the throttle shaft lever.
( 28 )
$28.60
—
$38.17
Summit Bucks
If you're looking for an easy upgrade to your automatic transmission, Sonnax Servo piston kits may be the answer. The improvement in shift quality is an immediate and noticeable value. These direct replacement kits will help to eliminate a bit of a "sloppy" gear performance caused by faulty OEM servo units. With all necessary rings and seals to prevent leakage and handle higher pressure, Sonnax servo pistons can be your link to greater band apply force. Choose the kit that matches your vehicle specs, then expect faster and firmer shifts!
( 30 )
$185.48
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
