Availability
Summit Bucks
Sonnax cooler line repair kits allow case salvage without transmission removal. A common complaint in late-model Chrysler rear-wheel-drive units is a cracked and/or leaking case caused by installing the cooler lines. The tapered threads and the lack of a stop on the OE cooler line fitting can load the case and create a fracture, resulting in leakage that may require replacing the case. Sonnax kits feature adapters that seal on the leading edge, preventing fluid from reaching the fitting threads and crack. The fittings have straight, not tapered threads, to prevent the crack from spreading. A special tap tool for case threads is also included in the cooler line repair kits.
( 7 )
$93.88
Summit Bucks
Sonnax Line pressure booster kits allow you to shift aggressively and then feel the tranny grab the clutches with more power when it changes gear. The larger boost valves and matching regulator springs raise line pressure progressively as higher pressure is commanded. These kits modify the sensor signal, which causes the computer to create a pressure increase. They're installed between the pressure sensor and vehicle harness using OE-style sealed connectors; no modifications are needed to the transmission.
( 14 )
$17.12
—
$82.70
Summit Bucks
Sonnax hydraulic line pressure booster kits contain stronger pressure regulator springs and large ratio boost valves designed to work together, providing progressive pressure increases as driving conditions become more demanding. Their springs are approximately 10 percent stronger than OEM and more conservative in impact than other aftermarket kit springs. Large ratio boost valves provide higher pressure incrementally and when it's needed the most. The combination of these springs and valves in the Sonnax hydraulic line pressure booster kits gives you the best of both worlds--a modest pressure increase at the low-end, with a high-end pressure that's equal to or greater than that of other aftermarket kit springs.
( 20 )
$12.53
—
$101.03
Summit Bucks
Transmissions showing symptoms of soft shifts from 1-2 or 2-3, periodic harsh shifts, or low line rise may be able to correct the problems with one of these Sonnax Line Pressure Modulator Plunger Valve kits. When sleeves become worn, electronic pressure control (EPC) oil can leak past the valve to cause the soft shifts; valves will also stick or hang up through wear, leading to the rough shift issue. Sonnax kits include a replacement modulator sleeve made from carbon steel to combat extreme wear, along with a durable plunger valve crafted from hardened alloy steel. The O-ring helps to prevent EPC oil loss. Sonnax Line Pressure Modulator Plunger Valve kits are produced for fitment on a variety of transmissions, including 6 and small 8-cylinder applications. Select the kit that's tailored to your vehicle.
( 2 )
$28.04
—
$42.14
Summit Bucks
Sonnax TCC regulator and isolator valve kits assist in recovering hydraulic control and renew TCC performance. Severe wear of the TCC (torque convertor clutch) regulator valve bore, caused by oscillation of the OE valve, allows the regulated converter to apply pressure to your exhaust. This is a primary cause for TCC-related slip code and overheated converters. Exhaust pressure also diminishes line pressure, which can result in burnt clutches. Excess wear at the isolator valve bore reduces TCC apply pressure. Reconditioning the bore and installing a Sonnax TCC regulator and isolator valve kit will restore normal TCC operation by reestablishing the hydraulic integrity of this circuit. Order the kit recommended for your transmission application. Features include: * Sleeve manufactured from highly wear-resistant aluminum * Hard-coat anodized aluminum regulator valve combats premature wear * Isolator valve lengthened to operate in unworn portions of the bore * Annular grooves help center valves in bore to reduce future side-load wear
( 4 )
$18.83
—
$107.85
Summit Bucks
OE rear stator support bushings have a tendency to wear-out prematurely due to sub-optimal material composition. This wear can lead to bushing failure, loss of correct pressure to the E-clutch, and gear ratio or solenoid codes. Sonnax rear stator support bushings have an upgraded material composition to restore worry-free operation, superior wear characteristics, and eliminate premature deterioration.
( 2 )
$7.16
Summit Bucks
Sonnax Zip kits are engineered to cure common problems associated with today's automatic transmissions. Sonnax Zip kits eliminate: * Burnt clutches * Line pressure instability * Loss of fuel economy * No line rise * Pressure loss * Shift concerns * TCC apply and release concerns * TCC codes * Pressure switch codes
( 11 )
$99.59
—
$235.14
Summit Bucks
Sonnax heavy-duty remanufactured valve bodies are built to overcome chronic shift and converter clutch apply complaints. It provides firmer shifts and a moderately increased pressure curve to improve performance, especially in truck and towing applications. Numerous Sonnax valve upgrades are included to restore hydraulic clearances that lead to shift complaints, clutch distress, converter complaints and codes, solenoid issues and pressure problems. Line pressure rise has been moderately increased to overcome shift complaints, delayed engagements, and to increase holding power to the clutches. To guarantee the highest level of operational performance, this remanufactured valve body is tested on state-of-the art equipment to verify that solenoid feed, clutch, converter, and line pressures match or exceed OE specifications. Choose your preferred kit packaged for your transmission. The valve body includes the following: * Oversized TCC regulator valve and sleeve, and limit valve spring for firmer TCC application * O-ringed bore plugs and abuse plugs * New accumulator control valve and sleeve with spring * Oversized AFL line up * New forward accumulator piston and seal * New pressure switch manifold * New EPC solenoid * New TCC PWM solenoid Kit contents: * Remanufactured valve body * Separator plate * Upper case gasket plate * Lower valve body gasket plate * 1-2, 3-4 accumulator springs * EPC solenoid harness adapter for 2003 to later units * Sonnax line pressure booster kit
( 3 )
$372.32
—
$582.46
Summit Bucks
The feed limit low valve in listed GM transmissions limits line pressure feed to the default disable solenoid and control valves. Feed limit low pressure is also connected to the boost ball system for "A" and "B" clutch control. This feed limit low valve is subject to significant side-load force, resulting in severe wear and pressure loss to the default disable solenoid and connected control valves. Such pressure loss can put the vehicle into default mode at high speeds, resulting in momentary wheel lockup, sudden downshift to 2nd gear, harsh shifts or a P0747 code. The feed limit low valve can wear out in as little as 30,000 miles, with many vehicles requiring service by 35,000 miles. A national recall from GM includes installing updated software that monitors valve performance and wear, then triggers a check engine light and reduced propulsion message 10,000 miles before failure. Vehicles are then limited to 5th gear, commonly referred to as limp mode, until the valve body is serviced to address the failed valve. Sonnax patented this drop-in feed limit low valve kit to overcome bore wear, restoring proper valve function immediately without the need or expense of replacing the entire valve body. The valve reroutes the balance circuit through an internal passage, significantly reducing the side-load force, while upgraded materials prevent future wear. * The kit overcomes drivability issues related to the GM 10-speed wheel lockup recall * Patented valve and sleeve combination overcomes bore wear and significantly reduces future side loading of the valve * Hardcoat anodized aluminum valve and wear-resistant sleeve combat premature wear * Drop-in Zip Valve parts install quickly and easily * Kit contents: -- Valve -- Sleeve -- Spring -- Retainer -- Drill -- Rivet (Note: The OE feed limit low valve is susceptible to premature wear and therefore a critical failure point. Replacing the valve is recommended even if the transmission isn't exhibiting problems and the valve passes a vacuum test.)
Not Yet Reviewed
$26.86
Summit Bucks
Sonnax knows you want your transmission to shift like a dream. Their automatic transmission bands are extra-wide intermediate bands suitable for heavy-duty, commercial, and 4x4 vehicles. These drop-in replacements provide 15 percent more holding capacity and feature a 60 percent thicker case anchor, decreasing the chance of band failure under severe conditions. (Note: The red-lined version of these Alto bands is designed for high-torque street racing applications. The Kevlar®-lined version is too aggressive for street use and best suited for high performance racing applications.)
( 8 )
$46.93
—
$267.47
Summit Bucks
GM 8L45 and 8L90 transmissions often suffer burnt clutches, shift concerns, low line pressure and/or converter apply complaints—due to excess wear in the signal accumulator piston bores in the control solenoid valve body casting. This wear allows valuable VFS signal pressure to exhaust, preventing proper shift control, line pressure regulation, and/or converter clutch apply. Sonnax drop-in signal accumulator piston kits allow bores to be reconditioned quickly and easily with no reaming required. The hydraulic integrity of the VFS signal pressure circuits are re-established, and future wear prevented with positive sealing and wear-resistant components. Features include: * Hardcoat anodized aluminum piston combats premature wear * Annular grooves to reduce wear rate * Highly wear-resistant sleeve to prevent future wear * Positive sealing O-ringed plug prevents leakage in already worn bores * Mating spring to re-establish OE dampening action * Drop-in Zip Valve parts install quickly and easily * Available for a variety of Chevrolet, GMC, and Cadillac transmission applications Kit contents: -- Sleeves (4) -- Pistons (4) -- Springs (4) -- O-rings (6), 2 extra -- End plugs (4)
( 1 )
$47.48
Summit Bucks
The Sonnax adjustable rear servo pin kit 34912-01K replaces GM TH400 and '95-earlier 4L80-E servo pins. OE pins have seven different lengths to allow for adjustment of the Low/Reverse band—but are no longer available from GM. The Sonnax pin kit has an adjustment range that covers the five longest OE pins to allow for accurate setting of the Low/Reverse servo piston travel. The pin features an O-ring groove to prevent leakage of line pressure past the case pin bore. Kit contents: * Servo Pin * Screw * (4) Small washers * (1) Large washer * (2) O-Rings
( 2 )
$31.29
Summit Bucks
GM 6L45, 6L50, 6L80 and 6L90 automatic transmission units may exhibit multiple line pressure and cooler/converter/lube flow problems due to excess wear in the pressure regulator bore. Deterioration at the balance spool end allows critical fluid loss, resulting in high line pressure, harsh shifts, and overheating due to reduced cooler/converter flow. Wear at the outboard spool robs converter feed pressure and lowers line pressure, resulting in soft shifts and burnt clutches. Installing a Sonnax pressure regulator valve kit restores the hydraulic integrity of these circuits for proper line pressure control in all ranges. A new pressure regulator valve outer spring is also included to replace weakened original springs and provide a modest 5 psi increase across the pressure curve. Additional details: * Hardcoat anodized aluminum valve combats premature wear * Lengthened critical spools operate in non-worn portion of bore for added stability and wear prevention * Annular grooves help center valve in bore to reduce future side-load wear * Drop-in Zip Valve parts install quickly and easily Kit contents: * Valve * Spring * Drill bit .040 in. * 2 checkballs (1 extra)
( 2 )
$13.40
—
$62.55
Summit Bucks
Sonnax throttle valve plunger kits address the poor line rise or no detent downshifts that can be common complaints in vehicles with a stock overdrive transmission. The steel plunger continuously reciprocates within the aluminum sleeve, wearing out the sleeve. This wear (plus the weak OE spring) allows throttle valve feed oil to leak past the plunger and exhaust, resulting in the aforementioned issues that can lead to 3-4 clutch failure. Sonnax throttle valve plunger kits include an improved throttle valve spring designed to properly maintain higher line pressure and improved throttle valve performance. Order the kit recommended for your transmission application. Features and items: * High-quality aluminum sleeve prevents wear * Tight-tolerance sleeve and plunger restore hydraulic integrity * Eliminates the part throttle sleeve orifice * Spring * Sleeve * Plunger
( 2 )
$41.99
—
$45.87
Summit Bucks
Worn babbit pump bushings in your GM Powerglide, 350, 400, or Allison AT540 transmission can allow the converter hub and inner pump gear to move off-center, thus causing damage to pump gears and the pump housing crescent. You can replace the worn originals with automatic transmission oil pump bushings from Sonnax. These direct replacements have tighter tolerances for improved fit over OE units, and they're lined with highly wear-resistant PTFE to help maximize the life of the older style and increasingly rare pumps. Order the bushings recommended for your application.
( 2 )
$3.84
—
$7.95
Summit Bucks
Sonnax ring gear stabilizer kits reduce high-speed vibration and drag, while also preventing damage to short pinion gear teeth. Powerglide transmissions with poorly supported planetary ring gears will experience vibration at high speeds and broken reverse friction plates as it moves off the transmission center line, oscillating out of control. These Sonnax kits install easily on Sonnax bolt-together, 1.80 and 1.69 ratio planetary carriers, and with proper support, the ring gear stays on-center.
Not Yet Reviewed
$208.76
—
$214.05
Summit Bucks
Sonnax actuator feed limit valve kits eliminates problems with the OE AFL valve design in GM 4L60-E, 4L65-E and 4L70-E units. OE designs have a large reaction area and are highly affected by side loading which wears the valve body bore, resulting in lower oil pressure to the shift solenoid and lower line pressures. Sonnax kits include a redesigned AFL valve and a wear-resistant sleeve to regulate pressure and re-establish proper pressure control. The hardcoat anodized aluminum valve features annular grooves to prevent side loading and has 54 percent more support by operating in the full contact sleeve. Sonnax kits include valve, sleeve, spring, and retaining clip.
( 1 )
$37.81
Summit Bucks
Sonnax clutch drum small parts kits are designed to be used with their high-quality, direct replacement GM Powerglide OE drums. The kits contain components to assemble your Sonnax Powerglide clutch drum with the parts designed for it and avoid problems that arise with mixing and matching from various sources. Sonnax drum small parts kits are included in their high performance and heavy-duty product line. Contents include: * Spring retainer * Small wear plate * Large wear plate * Bushing PTFE * Large retaining ring * Small retaining ring * Large lip seal * Small lip seal * 24 springs
Not Yet Reviewed
$45.56
Summit Bucks
Vehicles with a GM 8L45 or 8L90 automatic transmission may exhibit high or low line pressure that results in harsh/soft shifts, burnt clutches, loss of cooler and lube flow, and overheating of the transmission and converter. These problems may be caused by wear of the pressure regulator bore casting at the VFS signal port area and/or at the shuttle valve sleeve. Wear at the inboard port of the pressure regulator bore allows VFS (throttle) signal pressure to leak, preventing proper action of the pressure regulator valve and potentially allowing it to remain in the low line pressure position. Wear of the shuttle sleeve due to continuous oscillation of the shuttle valve creates a path for balance line pressure at the pressure regulator valve to exhaust, resulting in excessive low line pressure. Sonnax drop-in pressure regulator and shuttle valve kits restore hydraulic integrity to the lineup by addressing wear that subjects the transmission to either excessively high or low line pressure with upgraded materials and unique designs. The pressure regulator valve has been designed with a lengthened spring pocket spool at the VFS signal port area, which provides over double the sealing capability to this critical end of the valve and allows it to operate in unworn portions of the bore. The length of the critical shuttle valve diameter has been significantly lengthened to provide better sealing and durability of the assembly. Additional details: * Hardcoat anodized aluminum valves and highly wear-resistant billet aluminum sleeve combat premature wear * Pressure regulator valve VFS signal spool 200 percent longer than OE and operates in unworn area of the bore * Critical shuttle valve spool made 30 percent longer than OE for added sealing and durability * Drop-in Zip Valve parts install quickly and easily Kit contents: * Pressure regulator valve * Spring * Shuttle valve * Shuttle sleeve
Not Yet Reviewed
$65.06
Summit Bucks
The Sonnax automatic transmission reverse servo spacers provide a simple, low-cost way to add durability to the GM 4L80-E and 4L85-E transmissions and eliminates the need to retrofit early design reverse servo pistons into late units. Due to a design change in 1996, it had been found that the reverse servo piston commonly breaks because it is stressed more than early servos. Installation of Sonnax reverse servo spacers reduce piston stress by increasing the contact area between the aluminum piston and spacer and incorporating a cushion spring washer. The new contact area is over two times the original and the pressure between the piston and the spacer is reduced by 60 percent. The reverse servo spacer kits easily install during assembly and does not require machining or other modifications. Excessively high line pressure in 'Reverse' is directly related to boost valve wear and cross-leaks into the EPC oil circuit. For maximum durability, inspect and replace the boost valve with one of the Sonnax 4L80-E boost valve kits (sold separately). Product features and benefits: * Increased contact area reduces pressure between apply pin and piston by 60 percent * Added Belleville spring washer reduces shock on piston * No machining necessary, drop-in components * Maximum durability for minimal cost
Not Yet Reviewed
$12.91
Summit Bucks
Sonnax pump slide pivot pins are designed as direct replacements for your worn-out components. They're made from through-hardened steel to prevent excessive wear. A worn-out pump slide pivot pin can allow oil to leak past it, resulting in low or high line pressure. These pins help you to overcome that problem, and are available in solid-, grooved-, or punch-styles. Restore the hydraulic integrity of your transmission with the Sonnax pump slide pivot pin designed for your application.
Not Yet Reviewed
$8.11
Summit Bucks
Stop leaks while reviving line pressure and torque converter clutch (TCC) operation by installing Sonnax O-ringed end plug kits. OE end plugs prevent critical pressure loss by capping the bore while also functioning as a valve stop. Trust the Sonnax O-ringed end plug kits designed for your application to help you cross the finish line!
Not Yet Reviewed
$5.10
—
$62.13
Summit Bucks
In listed GM transmissions, severe wear of the TCC regulator valve bore from the OE valve allows regulated converter apply pressure to exhaust. This is a primary cause for a TCC-related 1870 slip code and overheated converters. Exhausting apply pressure also diminishes line pressure, which results in burnt clutches. Excessive wear at the isolator valve bore reduces TCC apply pressure. Sonnax isolator sleeve kits (77754-ISO) in combination with Sonnax TCC regulator valve kit 77754-03K or 77754-04K allow you to restore hydraulic integrity of the apply circuit. Sleeves are manufactured from highly wear-resistant aluminum to provide full support for the valve and prevent side loading. Includes retaining ring and sleeve.
Not Yet Reviewed
$12.96
Summit Bucks
In GM TH350 and TH350C units, the intermediate servo bore becomes scored from repeated cycling. The spring side of the piston has line pressure present in R, N, D. Excess leakage at the servo piston results in low line pressure and delayed engagements. During forward speeds, oil loss affects shift quality and reduces clutch life. To salvage cases, install a Sonnax intermediate servo sleeve kit (35709-01K). * Contains an aluminum sleeve and a replacement piston with a PTFE seal * Drop-in solution requires no machining of the transmission case * Contents: Sleeve, servo piston, and Seal PTFE
Not Yet Reviewed
$29.63
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
