On Sale | Summit Racing

On Sale

Moroso Exhaust Block-Off Storage Plates

Moroso exhaust block-off storage plates are a convenient way to keep engines sealed up from foreign objects during storage or when painting an engine. They are constructed from durable aluminum, making them lightweight and corrosion-resistant.

3.5 out of 5 stars ( 2 )

$18.99

—

$31.99

$17.09

—

$28.79

On Sale

Moroso Remote Water Pump Adapter Kits

Moroso remote water pump adapter kits are designed to free up space where your bulky water pump would normally reside, allowing for the use of a more compact and cost-effective remote electric water pump. These kits require the use of a remote thermostat housing and are available for a variety of engines.

5.0 out of 5 stars ( 2 )

$259.99

—

$291.99

$233.99

—

$262.79

On Sale

Holley Block-Off Kit for T4 Wet Cooler Feed Ports

Holley Performance offers block-off kits for T4 wet cooler feed ports. They're ideal for LT4 engine applications, such as those found on Corvette and Camaro applications from 2015 and up. The engine water pump aluminum block-offs are red anodized for protection.

Not Yet Reviewed

$27.01

$17.56

On Sale

APR Intake Port Covers

APR intake port covers are silicone inserts that seal your intake system from the engine bay. These popular intake covers feature three ports for additional flow and sound, but some have expressed the desire to close these off completely. APR intake port covers are made from flexible silicone, are available in two finishes to match your intake, and they simply pop into place in seconds. Order the finish you prefer.

Not Yet Reviewed

$24.95

$14.06

On Sale

Moroso AN Aluminum Port Plug Fittings

For your dry sump systems, oil pumps, oil filters, or any other application, Moroso offers top-quality fittings in all shapes and sizes to accommodate your specific needs. These fittings are designed for use when sealing threaded female ports in fluid systems. They're made from billet aluminum with an anodized finish and include an O-ring seal.

Not Yet Reviewed

$25.99

$23.39

On Sale

FiTech Nitro-Port Cast LS1 1000 HP Fuel Injection Systems

FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS1 1000 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.

Not Yet Reviewed

$2,245.00

—

$2,399.00

$2,020.50

—

$2,159.10

On Sale

FiTech Nitro-Port Cast LS3 750 HP EFI Loaded Intake Manifold Kits

FiTech Nitro-Port cast LS3 750 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 2007 and up.

Not Yet Reviewed

$1,200.00

$1,080.00

On Sale

FiTech Nitro-Port Cast LS3 500 HP EFI Loaded Intake Manifold Kits

FiTech Nitro-Port cast LS3 500 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 2007 and up.

Not Yet Reviewed

$1,200.00

$1,080.00

On Sale

FiTech Nitro-Port Cast LS1 500 HP EFI Loaded Intake Manifold Kits

FiTech Nitro-Port cast LS1 500 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 1997 and up.

Not Yet Reviewed

$1,200.00

$1,080.00

On Sale

FiTech Nitro-Port Cast LS3 1000 HP Fuel Injection Systems

FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS3 1000 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.

Not Yet Reviewed

$2,245.00

—

$2,445.00

$2,020.50

—

$2,200.50

On Sale

FiTech Nitro-Port Cast LS1 750 HP Fuel Injection Systems

FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS1 750 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.

Not Yet Reviewed

$2,245.00

—

$2,445.00

$2,020.50

—

$2,200.50

On Sale

FiTech Nitro-Port Cast LS3 500 HP Fuel Injection Systems

FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS3 500 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.

Not Yet Reviewed

$2,245.00

—

$2,445.00

$2,020.50

—

$2,200.50

On Sale

FiTech Nitro-Port Cast LS1 500 HP Fuel Injection Systems

FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS1 500 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.

Not Yet Reviewed

$2,245.00

—

$2,445.00

$2,020.50

—

$2,200.50

On Sale

FiTech Nitro-Port Cast LS3 750 HP Fuel Injection Systems

FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS3 750 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.

Not Yet Reviewed

$2,245.00

$2,020.50

On Sale

Moroso Intake Manifold Spacer Plates

Adapt your Chevrolet low deck big block manifold to your tall block engine with Moroso intake manifold spacer plates. They will allow you to use any high-performance big block Chevy manifold on a late-model Chevy tall block truck engine.

5.0 out of 5 stars ( 4 )

$231.99

$208.79

On Sale

Mr. Gasket Aluminum Layered Exhaust Gaskets

Mr. Gasket aluminum layered exhaust gaskets are reusable header or manifold seals that conform to surface irregularities and warped flanges. They will not shrink, deteriorate, or blow out. They're available for a wide variety of port styles and sizes. Features include: * Manufactured from 0.125 in. "dead soft" aluminum layers * Compresses to .060 in. to create a tight, leak-proof seal * Can withstand intense exhaust heat * Resists deterioration * Easy removal * For high performance street, drag race, road racing, and oval track use

4.38 out of 5 stars ( 61 )

$42.73

—

$44.08

$24.09

—

$33.89

On Sale

Flowtech LS Turbo Headers

Flowtech LS turbo headers improve smooth-flow engine breathing and increase cylinder scavenging effect by providing consistent tubing diameters. Constructed of heavy-duty, 16-gauge stainless steel, they're available in natural, black painted, and ceramic coated finishes. These headers offer 1 3/4 and 1 7/8 in. tubing diameters for increased exhaust flow, increased performance, and improved throttle response. A 3 in. collector provides additional strength and durability.

3.81 out of 5 stars ( 27 )

$434.95

$391.46

On Sale

Mr. Gasket Chrome Gas Lines

The chrome plating of these Mr. Gasket gas lines dresses up your engine bay, along with providing an excellent trail for your fuel to travel along. They're made of steel tubing, brass fittings, and silver-brazed connections. The hex fittings provide ample space for tightening to ensure a quick installation.

3.02 out of 5 stars ( 65 )

$25.95

—

$73.79

$14.63

—

$56.74

On Sale

Moroso Fuel Pressure Gauge Fittings

Moroso fuel pressure gauge fittings have a 1/8 in. NPT hole for easy plumbing to your fuel pressure gauge line. These fittings save wear and tear on carburetor inlet fittings by allowing for the quick and easy disconnection of the fuel line.

4.88 out of 5 stars ( 17 )

$23.99

$21.59

On Sale

Mr. Gasket CopperSeal Exhaust Gaskets

Mr. Gasket CopperSeal exhaust gaskets are made from .043 in. thick solid copper, and are track-proven to eliminate exhaust leaks in Top Fuel Dragster, Funny Car, and Alcohol class race cars. These gaskets feature an embossed O-ring design to increase sealing pressure around the exhaust ports, creating a tight, leak-proof seal. They're also ideal for tow vehicles and motor homes. CopperSeal gaskets are available in a variety of port styles, as well as more than a dozen size configurations. Order the model designed for precise fitment with your exhaust header.

4.12 out of 5 stars ( 42 )

$55.65

—

$69.29

$42.79

—

$53.29

On Sale

Holley Sniper Carbureted Fabricated Intake Manifolds

Holley Sniper carbureted fabricated intake manifolds are budget-friendly, sheet metal style intake manifolds. Each manifold is precision-fixtured and welded for a perfect fit and structural integrity. They are available for carbureted Chevy LS, Ford Coyote, small block Chevy, big block Chevy, and small block Ford engines. Features include: * Available for single or dual carburetor applications * 3mm (1/8 in.) thick T6061 sheet aluminum construction * More durable than competitive intakes * Bead-blasted silver or black anodized finishes * 100 percent TIG-welded * Custom Holley Sniper logo

2.25 out of 5 stars ( 40 )

$870.95

$566.95

On Sale

Moroso 12-Volt Solenoid Valves

Moroso 12 V solenoid valves allow the control of fluid flow from the driver's seat. Wire one of them to an ignition hot power source, and you can control any non-flammable fluid with the flick of a switch.

5.0 out of 5 stars ( 1 )

$252.99

$227.69

On Sale

Mr. Gasket Header/Manifold Exhaust Gaskets

Mr. Gasket offers header/manifold exhaust gaskets which are fabricated from large-fiber gasket material bonded by a high-heat resistant compound. They are precision die-cut for each application, and provide excellent sealing and durability.

3.92 out of 5 stars ( 12 )

$35.59

—

$69.69

$26.69

—

$52.27

On Sale

Mr. Gasket Ultra-Seal Exhaust Gaskets

Mr. Gasket Ultra-Seal exhaust gaskets are designed and constructed to improve the sealing of exhaust header flanges. Unlike standard exhaust gasket material, Ultra-Seal gaskets incorporate a graphite-impregnated facing and a steel-expanded metal core that reinforces and increases their tensile strength. This allows the gaskets to conform to warped flanges, giving them better sealing capabilities without deteriorating or cracking under the excessive heat and pressure that's common in exhaust systems. Ultra-Seal gaskets are available for a wide range of port styles and sizes. Additional features and benefits: * Expanded steel core provides stability and maximum torque retention to eliminate gasket failure * Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head * High-recovery material allows header or manifold flange to stay sealed if flange loses clamp-load * Can be trimmed for modified port applications * Designed for OE replacement, high performance street, drag race, road racing, and oval track use

4.63 out of 5 stars ( 178 )

$54.09

$40.57

On Sale Parts & Accessories