Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
On Sale Parts & Accessories
Shop limited-time discounts on parts, tools, and accessories from your favorite brands!
Shop limited-time discounts on parts, tools, and accessories from your favorite brands!
Shop limited-time discounts on parts, tools, and accessories from your favorite brands!
Showing In Stock Items. Show All 182 Items.
On Sale
Summit Racing™ LS CNC Billet Intake Manifolds
Our Summit Racing™ LS CNC billet intake manifolds look great and are made to take whatever you can throw at them. They are capable of handling 2,000 horsepower and over 300 psi of boost! Their plenums and bolt-on runners are CNC machined billet aluminum and will not distort or warp under boost. These intakes can accept up to 102mm throttle bodies and include hardware, gaskets, and an -8 AN fuel rail kit.
Not Yet Reviewed
$2,399.99
$1,999.99
On Sale
Holley Aluminum LS Valve Covers
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 146 )
$388.95
$260.10
On Sale
Earl's Performance LS Steam Vent Adapters
The original GM brazed vent tube manifold does not take into consideration the aftermarket intakes and accessories we put on our performance vehicles. Replace the rigid hard lines with Earl's Performance LS steam vent adapters. These adjustable outlets are O-ring seal adapters designed to convert to -3 or -4 AN plumbing. Earl's steam tube adapters are the most adjustable and lowest profile available. These adapters look as nice as they are installation-friendly. There are several kits available to allow for the optimal routing on your application, including dual outlet options, which eliminate the need for a Tee adapter.
( 18 )
$76.35
$43.03
On Sale
Flowtech LS Turbo Headers
Flowtech LS turbo headers improve smooth-flow engine breathing and increase cylinder scavenging effect by providing consistent tubing diameters. Constructed of heavy-duty, 16-gauge stainless steel, they're available in natural, black painted, and ceramic coated finishes. These headers offer 1 3/4 and 1 7/8 in. tubing diameters for increased exhaust flow, increased performance, and improved throttle response. A 3 in. collector provides additional strength and durability.
( 27 )
$434.95
—
$449.95
$248.23
—
$254.01
On Sale
Holley LS Engine Air Conditioner Brackets
Holley LS engine air conditioner brackets are designed to help you mount your A/C compressor and tensioner in the correct position. They include the necessary hardware to mount the assembly in place—and require an application-specific installation kit, sold separately. Holley cast aluminum brackets are available for a variety of compressor styles. Choose the model needed for your application.
( 30 )
$257.95
—
$363.95
$171.86
—
$205.92
On Sale
Earl's Performance LS Water Pump Adapters
Earl's leads the way for LS engines! OE water pumps come with push-on barbs for clamping the standard radiator hoses. Push-on hose connections just don't meet the demands of extreme performance. Earl's LS water pump adapter kits convert both the inlet and outlet to -20 AN fittings. The kits work with all LS water pumps; an O-ring adapter plate is included that upgrades early LS water pumps to the later, less restrictive style of thermostat. Features include: * Billet aluminum and stainless steel components * Anodized protection on aluminum components * Requires thermostat upgrade on early LS water pumps * Welding required
Not Yet Reviewed
$163.95
$93.17
On Sale
Hooker LS Engine Swap Transmission Crossmembers
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 43 )
$380.95
—
$399.95
$225.45
—
$253.81
On Sale
Holley LS Swap 4WD Truck Off-Road Oil Pan Baffles
Holley offers LS swap 4WD truck off-road oil pan baffles for a variety of trucks, including many Chevy and GMC models from the 1970s and '80s. They take Holley's popular cast aluminum oil pans (P/N 302-4 and 302-4BK) designed to swap LS engines into K10s and other trucks to a whole new level. Vehicles that endure prolonged sessions of climbing, crawling, braking, turning, and accelerating need extra protection from oil starvation. That's where these baffle kits come in. They improve upon the baffle included with those pans, maintain proper oil level at the oil pump pick-up during vehicle elevation and grade changes, accelerations, both lateral and linear, and braking. This prevents loss of engine oil pressure during off-road excursions as well as during hard acceleration. Each baffle is fabricated from sheet aluminum joined by TIG-welded joints. Directionally positioned one-way trap doors allow oil flow toward the oil pump pick-up but not away. These direct bolt-in baffles are designed to be used in the Holley P/N 302-4 and 302-4BK LS Swap oil pan with the standard pickup, and are a drop-in replacement for the standard tray baffle. They're great for street, race, and off-road applications.
Not Yet Reviewed
$217.95
$145.21
On Sale
MSD LS Airforce Intake Fastener Kits
MSD LS Airforce intake fastener kits serve as high-quality bolt replacements, specifically designed for the MSD Airforce intake manifolds (2701 and 2702 models). The Allen head style bolts are made from stainless steel with a natural finish and come with washers to facilitate fuel injection throttle body attachment.
( 1 )
$249.95
$141.26
On Sale
Holley LS Swap 4WD Truck Off-Road Oil Pan Rock Shields
Holley offers LS swap 4WD truck off-road oil pan rock shields for a variety of trucks, including many Chevrolet and GMC models from the 1970s and '80s. They take Holley's popular cast aluminum oil pans (P/Ns 302-4, 302-4BK, 302-24, and 302-24BK) designed to swap LS and LT engines into K10s and other trucks to the next level. Vehicles that are actually going to be taken off-road need additional protection. That's where these rock shields come in. This extra protection is for those wanting to go above and beyond the already tougher cast pan and protect the most important system in the engine bay. Additional product notes: * Couple with a 302-33 (LS) or 302-34 (LT) hinged-door baffle kit to make your vehicle's oiling system as bulletproof as possible * Direct bolt-on to 302-4 / 302-4BK Holley LS and 302-24 / 302-24BK Holley LT Swap off-road oil pans * Great for street, race, and off-road applications * Protects oil pan and filter from debris, rocks, and other potential hazards * Does not require dropping the pan to install
Not Yet Reviewed
$143.95
$81.62
On Sale
Holley LS Engine Accessory Drive Kits
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$469.95
$265.01
On Sale
New Vintage USA LS Temperature Sender Installation Kits
Direct from Detroit, New Vintage USA LS temperature sender installation kits allow standard 1/8 in.-27 NPT threaded senders to be installed in the standard LS ports. The included M12 bushings are handmade from brass hex stock and enable you to use full-length temperature senders—there is no need for special "short" units. A pre-wired step-up resistor for tachometers reading a tach signal from the PCM is also included. Choose New Vintage USA LS install kits for accuracy, proper fitment, and American craftsmanship.
( 2 )
$65.99
$59.39
On Sale
Howards Cams LS Dual Valve Springs
These Howards Cams LS dual valve springs are specifically designed for GM Gen III LS1, LS2, and LS6 performance applications. They feature high-tech winding, heat-treating, and finishing processes to make them the ultimate late model performance springs.
( 1 )
$237.99
$214.19
On Sale
QuickTime Bellhousings
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 107 )
$1,249.95
$845.47
On Sale
RAM HDX Clutch Kits
RAM HDX clutch kits are ideal for vehicles that will see mild street and occasional track use. These performance minded clutch kits will provide more clamping pressure over a stock unit and can handle power levels up to 450 hp. All HDX kits feature an increased clamp load pressure plate while providing smooth clutch engagement with only a slight increase in pedal effort. The HDX clutch disc features RAM's premium organic facing material for optimum performance. Most RAM clutch discs utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 65 )
$339.00
—
$699.00
$305.10
—
$629.10
On Sale
Earl's Performance Adjustable Coolant Crossover Tubes
Earl's Performance adjustable coolant crossover tubes simplify the plumbing of a remote mounted electric water pump by eliminating Ts, Ys, and extra hose ends. The design of these special crossover tubes allows for adjustable length—and for use as a coolant inlet or outlet on your engine. They're constructed from billet aluminum with a black anodized finish.
( 1 )
$279.95
—
$318.95
$157.80
—
$179.81
On Sale
RAM Powergrip Clutch Kits
RAM Powergrip clutch kits offer your vehicle the perfect blend of drivability and performance. This dual-purpose clutch kit will provide more clamping pressure over a stock unit and can handle power levels up to 550 hp. All Powergrip kits feature an increased clamp load pressure plate, providing crisp clutch engagement with only a slight increase in pedal effort. The Powergrip clutch disc features a combination dual-sided disc with RAM's premium organic facing material on one side and RAM's premium 900 series metallic facing material on the other side. This allows the Powergrip unit to deliver optimum street/strip performance. The RAM Powergrip discs also utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 52 )
$469.00
—
$799.00
$422.10
—
$719.10
On Sale
RAM Powergrip HD Clutch Kits
RAM Powergrip HD clutch kits are the ultimate kit for extreme street and track performance. This race inspired clutch kit will provide more clamping pressure over a stock unit and can handle power levels up to 650 hp. All Powergrip HD kits feature an increased clamp load pressure plate, providing crisp clutch engagement with only a slight increase in pedal effort. The Powergrip HD clutch disc features RAM's premium 900 series metallic facing material on both sides. This allows the Powergrip HD unit to deliver maximum grip in an extreme high-horsepower street or racetrack application. These RAM Powergrip discs also utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 24 )
$569.00
—
$869.00
$512.10
—
$782.10
On Sale
Hooker Transmission Crossmember Extension Brackets
Get your LS engine installed properly using one of these Hooker transmission crossmember extension brackets. They are manufactured from quality materials and bolt in place for an easy installation. The brackets are available for different types of transmissions, so they're sure to have you covered.
( 4 )
$32.95
—
$41.75
$18.57
—
$23.53
On Sale
MSD Atomic Throttle Bodies
If you're upgrading the intake manifold on your LS engine, then you'll also want one of these MSD Atomic throttle bodies. They feature a parabolic design for precise control, smoother off-idle response, and improved part-throttle drivability. The throttle bodies are manufactured from billet aluminum, with a stainless steel shaft and contoured inlet profile—which outflows the competition's big bore throttle bodies. A robust throttle cam assembly uses a 3-plate design for smooth operation, while the dual ball bearing shaft offers less shaft twist and better signal stability.
( 2 )
$999.95
$563.70
On Sale
Mr. Gasket Header Bolts
Installing headers can sometimes be a real pain, due to the tight spaces and the location and shape of the tubes. Mr. Gasket can help make installation a little easier and also help prevent annoying exhaust leaks from under-tightened header bolts. They have both the socket-head and hex-head styles of header bolts available. Hex types are heat-treated Grade 5 steel and have smaller-than-standard heads to ease access in tight spaces. Socket-head bolts are made from stronger Grade 8 steel for added ruggedness and they're great for those really difficult-to-reach spots. Both styles have a protective black oxide finish.
( 45 )
$14.71
$9.80
On Sale
Hooker Blackheart Transmission Crossmembers
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 28 )
$285.95
—
$379.95
$168.80
—
$213.90
On Sale
SLP Performance Blackwing Cold Air Induction Packages
SLP Performance Blackwing cold air induction packages will help to maximize your ride's potential. Factory air boxes can restrict airflow, choking your engine and its efficiency. These induction systems will fix that problem by eliminating the factory location and moving the intake closer to the cooler, denser outside air. The reusable high-flow, conical air filter aids in gathering and transferring more air—and is quick and easy to clean. SLP Performance offers these Blackwing cold air induction packages for numerous make/models, delivering extra power and fuel economy. Order the assembly designed for your vehicle application.
( 12 )
$269.99
—
$439.99
$242.99
—
$395.99
On Sale
Hooker Blackheart Engine Swap Motor Mount Kits
Add more cubic inches and power to your vehicle with the help of Hooker Blackheart engine swap mount kits. The kits are available for most popular models of cars and trucks with a variety of popular engine sizes. They include all of the components you'll need, at a cost that won't break your budget.
( 71 )
$159.95
—
$330.95
$90.15
—
$187.37
