On Sale | Summit Racing

On Sale

Steeda Cold Air Intake Restrictors

Steeda cold air intake restrictors allow you to add horsepower and torque to your Mustang, while maintaining your factory tune. They'll give you increased power for your daily driving needs with regular gas. And, since they can be easily removed or installed, you can use them at the track to run performance tunes, with no computer flash required. Your car will still produce up to 10 hp and 10 ft.-lbs. of torque to the rear tires with 87 octane fuel. Check applications for compatibility.

Not Yet Reviewed

$94.95

$84.95

On Sale

Holley Sportsman Model 4500 Dominator Carburetors

Holley Sportsman Model 4500 Dominator carburetors feature the patent pending new Holley Gen 3 main body, which is 5/16 in. taller than the previous generation! This new height allows for larger radius air entries to deliver smoother flow—which equates to improved throttle response and consistency. An extended air cleaner flange is incorporated for easy air scoop attachment when using the available air scoop adapter. Other features include all-aluminum construction, tunable billet metering blocks, throttle position sensor mounting points, and knurled (hand adjustable) curb idle screws. Each calibration has been dyno and track tested to deliver proven performance! Key features of the Holley Sportsman Model 4500 Dominator carburetor: * All-aluminum construction saves 3.8 lbs. over original models * Shiny with billet aluminum metering block and black hardware * Designed for use on Drag racers, Pro Street, or any high-horsepower engines * Calibrations optimized for today's race engines and new fuels * Fully machined from venturi throat to throttle bore for predictable and repeatable performance * Annular boosters deliver excellent signal and throttle response * Screw-in air bleeds offer precise tuning capabilities * Metering blocks feature improved durability, true gasket sealing, and adjustability (power valve channel restrictors, intermediate restrictors, and idle feed restrictors) * Dual 50cc accelerator pumps provide the perfect amount of fuel from idle to full throttle * 4-corner idle allows you to precisely control your idle system * Clear sight windows on fuel inlet side of bowls for easy and safe fuel level adjustments * Notched float and jet extension are installed * 5/8-18 in. inlet threads offer a large variety of plumbing options (uses standard 4500 fuel inlet spacing) * Factory-ready TPS mounting points for use with data acquisition systems * Knurled primary and secondary curb idle screws allow for easy idle adjustment without the use of tools * Contoured hex head squirter screws for streamlined airflow * Progressive secondary link installed for perfect off-the-line launches; no linkage parts under the carburetor (1:1 wire link included in kit) * 100 percent wet-flow tested by Holley technicians to assure carb arrives ready to run * Compatible with the Gen 3 Dominator 4-hole billet spacer

4.64 out of 5 stars ( 11 )

$1,299.95

—

$1,349.95

$1,168.95

—

$1,213.95

On Sale

Holley Gen 3 Ultra Dominator Carburetors

Holley Gen 3 Ultra Dominator carburetors feature a brand new main body, brand new state-of-the-art calibrations, high-volume HP fuel bowls, and sizes up to 1,475 cfm! The metering blocks are fully adjustable (emulsion bleeds, power valve channel restrictors, and idle feed restrictors). These carburetors include redesigned Holley HP fuel bowls for racing. Internal baffling helps to control fuel slosh and minimize float level fluctuations in hard launching or cornering situations. The HP fuel bowls also have material added in key areas (the needle and seat, fuel inlet, and sight window areas) for added strength in demanding race environments and can be plumbed from either side. Some of the many Holley Gen 3 Ultra Dominator carb features include: * Main body 5/16 in. taller than the previous generation * Designed for larger radius air entries optimized using computational fluid dynamics (CFD) software to deliver smoother flow into fully machined, big-bore Venturi * Improved 6061-T6 billet aluminum metering blocks offering improved durability, true gasket sealing (sealing surface integrity), and brightly dipped anodizing for good looks and corrosion protection * Power valve channel restrictors are now machined lower in the metering blocks for improved fuel delivery to the power valve circuit * Accelerator pump channel internally drilled, eliminating the need for an external plug, * Excess material removed for increased fuel capacity * Snap-in-place bowl vent whistle makes removal and/or replacement easier * 20 percent more fuel capacity vs. traditional V-bowl, eliminating fuel starvation and providing consistent air/fuel ratios * Fuel shelf is positioned below the needle and seat to minimize fuel aeration and promote more consistent metering * Fuel trough designed into the floor of the bowl to route fuel flow directly to the jets and assist in keeping them covered by fuel * Clear sight windows on both sides of the bowls for easy and safe fuel level adjustments * Built-in drain plug in the front center of the bowl provides easy access to empty the bowl (contoured entry provides smooth fuel flow directly to the needle and seat) * Designed for use on drag race, Pro Street, or any high-horsepower engines * All-aluminum construction saves 3.8 lbs. over original models (28 percent weight savings) * Dual 50cc accelerator pumps

4.45 out of 5 stars ( 20 )

$1,549.95

—

$1,999.95

$1,393.95

—

$1,798.95

On Sale

Holley Track Warrior Carburetors

Push your racing performance to the next level with Holley Track Warrior carburetors. The aluminum contoured main body design weighs less while adding horsepower and torque. These carbs have screw-in air bleeds for precision tuning capabilities, billet metering blocks, a billet base plate, adjustable secondary linkage, and knurled (hand-adjustable) curb idle screws. Features of Holley Track Warrior carbs include: * Aluminum construction for weight savings and long-lasting good looks * Color options include purple or black * Optimized race calibrations for outstanding throttle response * Contoured Venturi inlet offers balanced airflow for increased horsepower * Four-corner idle for precise idle control * Mechanical secondaries for remarkable tire-turning performance * Billet metering blocks for improved durability (compared to cast blocks) * True gasket sealing and fully adjustable (emulsion bleeds, power valve channel restrictor, and idle feed restrictors.) * Available in 650, 750, and 850 cfm versions * For lightweight vehicles with manual transmissions or automatics with a high stall and low gearing * 100 percent wet-flow tested by Holley technicians to ensure on-arrival performance

4.29 out of 5 stars ( 31 )

$849.95

—

$972.95

$763.95

—

$874.95

On Sale

Quick Fuel E85 Billet Metering Block Conversion Kits

Bring your carburetor into the new generation by going green. These Quick Fuel E85 billet metering block conversion kits feature standard calibration, screw-in idle feed restrictors, no secondary power valve provision, and a 4-mixture idle screw setup. The metering blocks are CNC-machined from billet aluminum and green anodized for protection. Specifically designed for use with E85 fuels, these Quick Fuel E85 billet metering block conversion kits will give your carburetor the adjustability you've been looking for, all while protecting the environment and going green.

4.88 out of 5 stars ( 8 )

$255.95

$230.35

On Sale

BendPak HDS-18EA Heavy-Duty Extended Ramps Alignment Truck Lifts

BendPak HDS-18EA heavy-duty extended ramps alignment truck lifts are engineered to make light work out of heavy lifting. They're built to last and feature upgrades that increase safety, durability, and productivity. These are the lifts that graduate from the class of mid-size trucks, vans, and SUVs—up to heavy-duty applications! They are professional truck lifts that can even handle some industrial and farming equipment. Additional facts and specs: * 18,000 lb. lifting capacity * Multi-caster slip plates * Includes 48 in. extended steel approach ramps * Supersized 12 in. diameter cable sheaves * Stainless steel lifting cables * Integrated flow restrictor * Durable powdercoat finish * Spring-loaded safety locks * Second lock system on constant guard * Full enclosed lifting cables * Multiple adjustable height locking positions * Maintenance-free electric hydraulic power system * 12 in. x 12 in. base plates

Not Yet Reviewed

$25,195.00

$24,495.00

On Sale

BendPak HDS-18E Heavy-Duty Extended Ramps Truck Lifts

BendPak HDS-18E heavy-duty extended ramps truck lifts are engineered to make light work out of heavy lifting. They're built to last and feature upgrades that increase safety, durability, and productivity. These are the lifts that graduate from the class of mid-size trucks, vans, and SUVs—up to heavy-duty applications! They are professional truck lifts that can even handle some industrial and farming equipment. Additional facts and specs: * 18,000 lb. lifting capacity * Includes 48 in. extended steel approach ramps * Supersized 12 in. diameter cable sheaves * Stainless steel lifting cables * Integrated flow restrictor * Durable powdercoat finish * Spring-loaded safety locks * Second lock system on constant guard * Fully enclosed lifting cables * Multiple adjustable height locking positions * Maintenance-free electric hydraulic power system * 12 in. x 12 in. base plates

Not Yet Reviewed

$21,595.00

$20,795.00

On Sale

Steeda Ford Mustang ProFlow Cold Air Intake Kits

Steeda Ford Mustang ProFlow cold air intake kits are designed for maximum airflow and horsepower. They're manufactured from quality materials to ensure high performance and durability. An easy-bolt on part for the garage mechanic, these kits are supplied with an air box and built-in race-tested velocity stack, as well as a high-flow nano-fiber filter. They mount in the factory location with the included rubber trim to seal the shield against the hood and fender for lower air temperatures. Dramatic power increases across all rpm ranges have been achieved with these premier units. All necessary hardware and easy-to-follow instructions are furnished. Order the Steeda ProFlow cold air intake engineered for fitment on your specific car—then take your Ford Mustang to the next level of performance! (Note: Some models do require a tune.)

4.88 out of 5 stars ( 8 )

$574.95

$514.95

On Sale Parts & Accessories