On Sale | Summit Racing

On Sale

Competition Engineering Standard Series 4-Link Kits

Competition Engineering Standard Series 4-link kits provide rear suspensions that will give you the freedom to make incremental changes in your car's point of instant center (the adjustable point that determines weight transfer), for head-snapping launches. Designed for flexibility of adjustment to suit an individual car's characteristics, these kits allow custom installation to a particular application. Gain increased adjustability over ladder bar suspensions with Competition Engineering Standard 4-link rear suspensions. Standard kits include: * Direct threaded seamless steel tube links * Permanently mounted adjusting nuts for quick tuning * Stamped cold rolled steel brackets * Chromoly spherical rod ends * Grade 8 fasteners and jam nuts

4.82 out of 5 stars ( 22 )

$404.99

$364.49

On Sale

Competition Engineering Magnum Series 4-Link Kits

Competition Engineering Magnum 4-link kits offer the ultimate strength and adjustability for your high horsepower race car. Your big power racer needs more than directly-threaded links. These Magnum kits feature special threaded tube inserts that weld into thick-walled chromoly steel link tubing to handle shock loads without flexing. Plus, the 1/4 in. thick housing and frame brackets feature integral shock mounting holes to save you fabrication time on separate shock brackets along with additional mounting holes for wheelie bars, sway bars, and additional tube gusseting. Your high performance race car needs high performance traction devices; get connected with Competition Engineering Magnum 4-link kits. Features: * Chromoly steel tube links * Computer machined treaded tube ends * Thick steel brackets * Chromoly spherical rod ends * 21 in. mounting radius * Hardware and instructions

4.5 out of 5 stars ( 10 )

$698.99

$629.09

On Sale

Competition Engineering Diagonal Links

Designed to stabilize ladder bar and 4-link suspensions, these Competition Engineering diagonal links connect the front mounting bracket of a ladder or 4-link to the rear housing mounting bracket on the opposite side. They include left and right-hand threaded rod ends to allow for on-car adjustments. These links can be trimmed to fit narrow rear-ends, and come complete with all of the necessary brackets and hardware.

4.71 out of 5 stars ( 17 )

$129.99

—

$228.99

$116.99

—

$206.09

On Sale

Competition Engineering Ultra Magnum Series Diagonal Links

Designed to eliminate side-to-side housing movement, these Competition Engineering Ultra Magnum Series diagonal links are superior to the panhard bar for eliminating sway in ladder bar and 4-link suspensions. They include left and right-hand threaded rod ends to allow for on-car adjustments and can be shortened to fit a narrow chassis. Ultra Magnum Series weld-on diagonal link kits by Competition Engineering help keep your rear axle housing centered in the chassis for straight tracking. Product features: * Constructed from chromoly steel tubing * 1.000 in. diameter x 0.065 in. wall thickness x 36.000 in. overall length * Kit includes weld-in tube adapters, mounting brackets with 1/2 in. holes, plus all rod ends and mounting hardware

Not Yet Reviewed

$134.99

$121.49

On Sale

REKUDO Rear Sway Bar End Links

Maximize suspension performance in your ride with REKUDO rear sway bar end links! These rear sway bar end links are designed for vehicles that didn't come from the factory with a rear anti-sway bar. They can also be used as a service replacement parts for the Tesla Model 3 (all models with a rear sway bar). These kits include the end links for both sides of the vehicle to add a rear sway bar. The end links have a black E-coat finish to protect them from corrosion. REKUDO offers a wide range of suspension parts that will plant your vehicle through the turns and maintain a comfortable ride on the street.

Not Yet Reviewed

$65.75

$37.06

On Sale

Competition Engineering Ultra Magnum Series 4-Link Kits

Competition Engineering Ultra Magnum 4-link kits are ultra-tough and ultra-adjustable. These 4-link kits can obtain substantial gains when tuning your chassis with an innovative system of multi-hole brackets that weld to the chassis and bolt on to chassis brackets. Your high horsepower race car will be fitted with strong chromoly rod ends, thick-walled 4130 chromoly tubes, and NAS-quality flare head bolts and nuts. Get all the adjustment you need to tune your high performance race car for high performance traction with Competition Engineering Ultra Magnum 4-link kits.

Not Yet Reviewed

$1,008.99

$908.09

On Sale

Competition Engineering Slide-A-Link Wrenches

These Competition Engineering Slide-A-Link wrenches are the exact size you need for the adjusting nuts on the Competition Engineering Slide-A-Link. They are manufactured from billet aluminum and feature a black anodized, corrosion-resistant finish.

4.86 out of 5 stars ( 7 )

$97.99

$88.19

On Sale

Competition Engineering Ladder Link Ladder Bars

With Ladder Link bars from Competition Engineering, you can fine-tune the suspension without taking the bars off of your vehicle. These bars won't bind like other bars, either, because of the dual-pivoting adjustable lower links. The bars are made of steel tubing for strength. They also have high-quality spherical front rod ends and forged solid rear rod ends.

5.0 out of 5 stars ( 9 )

$517.99

$466.19

On Sale

RaceQuip Latch & Link Harnesses

RaceQuip is known as "the best value in driver protection," and their Latch & Link harnesses continue that tradition. These belt and strap assemblies keep you secure with cadmium plated drop-forged steel hardware, creating ultimate strength with reduced weight. The webbing is 3 in. premium nylon specially stitched and retained with the latching system. RaceQuip Latch & Link harnesses are distinguished by a pivoting hammer or "duckbill" that locks all belts into place securely by snapping down into a detent. These "double-adjustable" systems allow you to tailor either end for an easy installation. You choose which safety system is right for you and your car--from 5-point, 4-point V-type, or 5-point H-type harness assemblies. Belt yourself in with maximum quality at minimal pricing: RaceQuip Latch & Link harnesses!

4.79 out of 5 stars ( 58 )

$137.95

$107.85

—

$117.95

On Sale

RaceQuip Small Buckle Latch & Link Pro 5-Point Ratchet Auto Racing Harnesses

RaceQuip small buckle latch and link Pro 5-point ratchet auto racing harnesses have twin individual-style shoulder belts and are manufactured using black 3 in. premium polyester webbing. They utilize a ratchet on the left side lap belt to adjust tension and cinch down tight. The ratcheting mechanism is cranked by hand with the included 1/4 in. ratchet handle. Experience the best value in safety with a RaceQuip 5-point ratchet harness. Features, items, and specs: * Both shoulder belts and sub-belt hook over the link; link is inserted into latch on lap belt; lever is then brought down into and over the link, securely holding all of the pieces in place * Double adjustable lengths can be adjusted on either end for installation ease * 3 bar slide allows you to mount belts by either wrapping them around a roll bar or by bolting them in place with supplied ends (bolts not included) * Black oxide-coated drop-forged steel hardware to help exceed SFI 16.1 rating * Compact, lightweight buckle stays out of the way * Shoulders adjust from 28 to 60 in. * Lap belt adjusts from 40 to 78 in.

Not Yet Reviewed

$229.95

$172.95

On Sale

Competition Engineering Torque Link Kits

Competition Engineering has developed these engine-limiting torque link kits for enthusiasts who want the benefits of a solid motor mount for racing, and the comfortable ride of a stock motor for street use. It all begins with the installation of two supplied zinc-plated brackets. One goes on the front of the driver side cylinder head, and the other on the sway bar mount on the frame. For racing use, the removable torque link can be installed with the supplied pins and clips, limiting engine movement. When the racing is over, simply remove the torque link, and you're ready for a smooth ride home. These kits include all hardware and instructions for a complete installation.

3.38 out of 5 stars ( 8 )

$103.99

$93.59

On Sale

Competition Engineering Magnum Series 4-Link Brackets

Competition Engineering offers these Magnum series 4-link brackets to enable you to replace bent or damaged brackets when updating your rear-end housing. Designed for use on 3 in. diameter axle tubes, these brackets feature a radiused profile that simplifies welding and saves hours of fabrication time. The rugged steel construction eliminates bending in ultra high-horsepower cars, and the entire profile is stamped from hot rolled steel in one operation, to eliminate distortion and ensure exact dimensions.

Not Yet Reviewed

$54.99

$49.49

On Sale

Competition Engineering Slide-A-Link Traction Bars

The guys at Competition Engineering say these Slide-A-Link traction bars will cut half a tenth off of your 60 ft. times. The secret is their innovative telescoping design, which gives you two full inches of adjustability when setting pinion angle and spring preload. That gives you more control over front-end lift and weight transfer, so you can make quick, easy, on-car adjustments to track conditions. The bars come with special urethane bushings that store energy to prevent unloading between shifts, replacement lower axle mount pads, 1/2 in. U-bolts, aluminum front spring eye bushings, hardware, and complete instructions.

4.33 out of 5 stars ( 12 )

$708.99

—

$811.99

$638.09

—

$730.79

On Sale

Competition Engineering Universal Rear Frame Rails

These Competition Engineering universal frame rails provide the perfect foundation for just about any race suspension. Available for 4-link and ladder bar suspensions, these mandrel-bent rails provide solid mounting for your suspension and rear axle components, while allowing you to run a low ride height or taller race tires.

4.57 out of 5 stars ( 7 )

$417.99

—

$499.99

$376.19

—

$449.99

On Sale

Moroso Secondary Linkage Kits

Moroso secondary linkage kits will provide a 1:1 ratio secondary linkage operation. You'll have adjustable secondaries for your Holley carburetor.

3.0 out of 5 stars ( 1 )

$22.99

$20.69

On Sale

Belltech Performance Handling Kits

It doesn't matter if your favorite ride is your 1966 Chevelle or your new 2010 Camaro--Belltech performance handling kits can make your special ride even better. They are specifically designed for your application and may include front and rear springs, anti-sway bars, Street Performance shocks, bushings, and necessary hardware. Belltech coil springs are manufactured from chromium alloy steel and are hot-wound, shot-peened, and powdercoated to exact specifications. Their anti-sway bars replace your stock bars with larger diameter, cold-formed, solid steel bars with swedged ends for superior strength. Belltech's Street Performance nitrogen-charged shock absorbers offer you OEM replacement quality with high performance control. All of this adds up to a more confident driving feel with proper ride height and quality. Whether you need to improve your old or new muscle car's performance, Belltech has a performance handling kit designed for you.

3.8 out of 5 stars ( 5 )

$1,508.00

—

$1,965.00

$1,357.20

—

$1,768.50

On Sale

DiabloSport Trinity Analog Harnesses

DiabloSport Trinity analog harnesses are designed to make hooking up external sensors much easier. This includes things like boost gauges, air/fuel meters, and EGT sensors. DiabloSport takes their products seriously and it shows, having each and every product inspected not only by machine, but also by their staff. DiabloSport Trinity analog harnesses not only make it possible for you to improve complex computer systems, but they're also easy to use.

5.0 out of 5 stars ( 1 )

$47.46

$42.71

On Sale

Competition Engineering Brackets and Tabs

Competition Engineering offers several different types of brackets and tabs to help make it easier for you to mount and install accessories to your chassis. These brackets and tabs enable you to replace bent and damaged brackets, or update your chassis setup.

4.52 out of 5 stars ( 21 )

$40.99

—

$60.99

$36.89

—

$54.89

On Sale

Competition Engineering Rod Ends

Competition Engineering rod ends are available in a number of sizes, in both right-hand and left-hand threads, and all come with jam nuts. Their all-steel bodies are available in low-carbon, chromoly, or forged steel. Competition Engineering highly recommends that you use chromoly rod ends exclusively with their 4-link and ladder-bar suspension kits, with polyurethane-lined types reserved for street applications with ladder bars. Forged-steel types are not recommended for the front points of 3 or 4-link suspensions. Their Magnum series chromoly rod ends are the best choice for ladder bar and 4-link applications. They are self-lubricating and self-sealing with increased thickness for greater tensile strength--perfect for demanding motorsports applications. When loaded, Magnum rod ends create metal-to-metal contact for unsurpassed strength, yet when unloaded, the Rilsan AZM30-injected liner will not rattle or squeak like standard 2 or 3-piece rod ends.

4.98 out of 5 stars ( 50 )

$17.99

—

$54.99

$16.19

—

$49.49

On Sale

Competition Engineering Magnum Series Anti-Roll Bars

Drive straighter off the starting line and improve 60 ft. times. Competition Engineering Magnum series anti-roll bars are designed to eliminate body roll during hard launches at the drag strip. They feature formed, heavy-gauge frame mounts, enabling you to install the torsion tube through the frame rails for increased strength. Billet aluminum arms are attached with special incorporated splines to prevent the arms from slipping on the torsion tube. Additional features include: * 4130 chromoly torsion tube * 2 adjustable splined billet aluminum arms * 2 mounting brackets * 2 adjustable links * 4 rod ends * 4 weld-in threaded adjusters * 2 flange mounted bearings * Installation hardware

4.73 out of 5 stars ( 15 )

$493.99

$444.59

On Sale

Competition Engineering Coil Spring Traction Bars

Designed to eliminate wheel hop and parts breakage, these coil spring traction bars from Competition Engineering will withstand increased power levels and improve drag-style launches in GM intermediates. Other features include 2 in. x 2 in. x .120 in. wall steel tubing construction for strength, threaded links for infinite adjustability, mandrel-formed brackets to ensure a perfect fit, and all necessary mounting hardware. They also come in your choice of a black powdercoated or triple chrome plated finishes.

4.4 out of 5 stars ( 10 )

$404.99

$364.49

On Sale

Moroso Remote Push/Pull Battery and Alternator Disconnect Kits

Moroso remote push/pull battery and alternator disconnect kits allow you to disconnect both the battery and the alternator feed simultaneously without the need for relays. Required for many classes, including NHRA and SCCA, these easy-to-mount disconnect kits provide racers with an accessible on/off switch to completely shut-off electrical power in case of an emergency. Kit includes the following components: * Master disconnect switch * Brackets * Swing arm linkage * 18 in. long aluminum tube actuator link * All necessary bushings and fasteners * Switch position decals and switch location decal for the exterior of vehicle

5.0 out of 5 stars ( 2 )

$155.99

—

$209.99

$140.39

—

$188.99

On Sale

Moroso Push/Pull Battery Disconnect Mounting Kits

Moroso push/pull battery disconnect mounting kits allow you to mount a battery disconnect switch to a roll cage tube with a weld-on bracket, then actuate it with the provided T-handle protruding through the rear panel of the vehicle. They include the correct brackets, swing arm linkage, an 18 in. long black anodized aluminum actuator tube link, and the necessary bushings and mounting hardware for installation.

4.75 out of 5 stars ( 8 )

$93.99

$84.59

On Sale

Edge Comp Modules

These Edge Comp modules maximize engine efficiency by monitoring the rpm, timing, turbo boost pressure, and fueling parameters. The modules use this information to determine and control both fueling and timing enhancements for the Bosch fuel injection pump. Timing and fueling enhancements are controlled via CAN-BUS through the Data Link and by connecting directly into the Bosch fuel injection pump. The Edge Comp modules feature five power levels with power gains ranging from 40-120 hp. Each of the five power levels has an independent 5-level adjustable responsiveness setting, providing for a total of 25 levels of adjustability! The responsiveness settings enable you to dial-in the optimum balance between responsiveness and low-boost smoke control, no matter what additional power modifications have been made to the engine. The Comp modules are fully adjustable on the fly, and mount inside the cab.

5.0 out of 5 stars ( 1 )

$799.95

$718.95

On Sale Parts & Accessories