On Sale | Summit Racing

On Sale

MSD Digital 6AL Ignition Controllers

Advance with the digital power of your popular favorite--MSD 6AL ignitions. With less power draw and higher output, MSD moves you with "the fire to drive" in a digital powerhouse! Inside microprocessors, updated circuits and efficient components monitor and handle every firing and rev limit to produce more power while pulling less current. Don't worry; features that made their 6AL boxes your first choice remain but with improved output--more than135mJ of spark energy for every firing with 530+ volts to the coil! And, to go with the new power, a new look. These digital 6AL ignition controllers are sleek with a lower profile. Wiring is routed out one end through a sealed and locked connector and two rotary dials to set rpm limit are positioned right on top--easier installation, super easy access and a clean, neat appearance under the hood. Controllers are supplied with wiring harness and components you need for install plus, vibration mounts. Increased output and proven multiple-spark power--MSD digital 6AL ignition controllers are a definite win-win!

4.72 out of 5 stars ( 432 )

$349.95

—

$354.95

$314.95

—

$319.45

On Sale

MSD Ultra 6AL Ignition Boxes

The new Ultra 6AL Series ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Cylinder selection, Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value, Start retard value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard: 0, 10, 20 degrees * Alerts and monitors available * High level of security connection from phone to ignition box (encryption), including sequence in push-button implementation * Maximum programmable retard of 30 degrees * Ignition boxes are available in red or black

4.2 out of 5 stars ( 10 )

$357.95

$322.15

On Sale

MSD Ultra 6AL Plus Ignition Boxes

The new Ultra 6AL Plus ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL Plus ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Straight USB port to easily connect to MSDView using a laptop * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard through rotary switches: 0, 10, 20 degrees * Programmable cylinder selection through rotary switches: 4, 6, and 8 cylinders * Alerts and monitors available * High level of security connection from phone to Ignition box (encryption), including sequence in push button implementation * Maximum programmable retard of 35 degrees * Programmable timing curves in 2D plots or 3D tables (RPM vs Timing vs MAP Pressure); you can plot the 3-D graph and edit a table 20x20 either from mobile app (phone) or from MSDView (laptop) * Programmable Launch Timing (seconds vs degrees after launch wire activation) * MAP sensor interface up to 400 kPA (58 psi / 4 Bars) * Capable of programming cylinder selection and start retard without a computer or app for old school racers (like 6425 or 6428 box)

3.56 out of 5 stars ( 9 )

$478.95

$430.95

On Sale

MSD 6AL-2 Ignition Boxes

MSD is excited to announce the next generation of 6-Series ignition controls--the 6AL-2! These all-new ignition controls combine a new housing, new digital controls, and more power in a sleek package. You still receive the 20 degree duration of multiple sparks, combined with higher output to ensure complete combustion. There is a 2-Step rev control built into the housing, but there are no rpm modules! Adjustments are made via four rotary dials for 100 rpm increment control! The all-new capacitive discharge ignition will easily connect to nearly any 12 V negative ground distributor system, even Hall-effect pickups. They offer higher output, with up to 135mJ and 535 V, and accept points and mag pickup triggers.

4.57 out of 5 stars ( 95 )

$460.95

$413.95

On Sale

Summit Racing™ Ignition Tune-Up Kit Pro Packs

Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.

4.71 out of 5 stars ( 51 )

$923.73

—

$1,029.73

$840.65

—

$935.15

On Sale

MSD Super HEI Kits

MSD Super HEI kits solve the common problem of power loss and a lack of response above 4,500 rpm. Different kits are available with all of them allowing you to remove or bypass the low-powered HEI module and coil and replace them with an MSD 6A or 6AL ignition control and Blaster 2 high output coil. The results are more power, an increased rpm range, easier starting, and better mileage and performance. The Super HEI conversion fits all GM V8 engines with the GM HEI internal coil distributor. The complete Super HEI kits include an MSD 6A ignition, Blaster 2 coil, coil wire, HEI dust cover, and coil bracket. The HEI II kits are identical to the standard kits, except that they come with a 6AL ignition. The 6AL has Soft Touch Rev Control to protect your engine from overrevving.

4.71 out of 5 stars ( 24 )

$562.95

$505.95

On Sale

MSD Digital-6 Replacement Wiring Harnesses

MSD Digital-6 replacement wiring harnesses will provide the quality and performance matched only by the originals. You can trust MSD to provide premium replacement parts and wiring for their ignition controls and your build. Whether you're freshening your car, or have a wiring harness with one too many splices, replace them with original components from MSD.

4.92 out of 5 stars ( 13 )

$33.73

$30.36

On Sale

MSD Digital 2-Step Rev Controllers

These MSD 2-step rev controllers coupled with MSD's digital 6AL ignition box let you choose from two different rpm limits that can be activated at different times. For example, you can use a lower-rpm setting for staging and then automatically switch to a higher-rpm setting after you release your trans-brake or line lock. The 2-Step is also digitally controlled and connects to the Digital 6AL's gray tach output wire. There are two easy to read rotary dials that let you set the launch rpm in 100 rpm increments from 2,000-11,800 rpm. There is an activation wire that connects to the transbrake, a clutch switch or to the line-lock to activate the low rpm limit. When that switch is released, the low rpm limit is turned off and the car launches hard!

4.64 out of 5 stars ( 28 )

$120.95

$108.85

On Sale

Holley EFI Tach Input Ignition Adapters

Holley EFI tachometer input ignition adapters are for applications using a CD Box, such as an MSD 6AL, while not using timing control. They're designed for use with Sniper 2 EFI systems and external ignition control boxes with tachometer signal output. Not for direct connection to coil.

Not Yet Reviewed

$28.71

$25.84

On Sale

MSD Pro-Billet Ignition Bundles

MSD Pro-Billet ignition bundles contain performance components to breathe new life into your engine. Available with different Pro-Billet distributors; select the kit with the distributor for your engine. Contents and features: * Pro Billet distributor -- CNC machined billet aluminum housing and billet aluminum base -- Polished steel shaft is QPQ coated and guided by a sealed ball bearing -- Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range * Blaster 2 coil -- Improved spark output -- Alkyd tower with high dielectric properties is less prone to carbon tracking -- 100:1 turns ratio and lower primary resistance produce high-voltage output -- Metal canister is filled with a premium grade oil for cooling * Red MSD 6 AL Digital ignition box -- High output with 530 volts and 135mJ of spark energy -- Set an rpm limit with two rotary dials in 100 rpm increments -- Built-in LED for system checks -- All wires exit through a locked, sealed connector

5.0 out of 5 stars ( 3 )

$716.95

—

$767.95

$644.95

—

$690.95

On Sale Parts & Accessories