Availability
On Sale
MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance, as well as maximum protection against spark loss.
( 125 )
$9.80
—
$10.81
$8.82
—
$9.73
On Sale
Accurate ignition timing is one of the most vital adjustments you can make to your engine. Proper timing can mean the difference between winning and losing a race or even blowing an engine (as a worst case scenario). MSD Timing Tapes help you to recognize the importance of the timing. They come with eight different tapes to fit common balancers ranging from 5.25 in. to 8 in. in diameter. These tapes are marked off in one degree increments from 14 degrees ATDC to 64 degrees BTDC and are printed on a tough, chemical resistant material. Not only do the MSD Timing Tapes help you get an exact timing setting, they allow you to see exactly where the Total timing is set. Remember, the Total timing is just as critical, if not more, than the initial timing and the MSD Timing Tape will help you ensure that it is set accurately.
( 122 )
$7.60
$6.84
On Sale
If you're tired of burning up standard rubber grommets, you'll want to try these Stainless Works blue exhaust grommets. They're made from high-temp silicone to hold up better--and have the best heat-resistance in the industry. The grommets work great for isolating exhaust vibration from mounting bolts when attached to your exhaust system hangers and frame.
( 15 )
$5.70
$4.80
On Sale
Restore the performance of your high-mileage fuel pressure regulator with these genuine Holley diaphragm repair kits. You'll regain the accuracy and performance of the regulator from when it was new.
( 64 )
$10.30
$9.27
On Sale
Mr. Gasket carburetor base gaskets are made from a highly durable cellulose/nitrile/rubber composites. These synthetic high-tensile strength, high-temperature gaskets have excellent sealing properties for oil, fuel, and coolant material. Carburetor base gaskets seal using low clamping pressure, conforming to and sealing imperfections. They're also precision die-cut to ensure a proper fit. The gaskets are available in a variety of styles and thicknesses for specific carburetor flange applications.
( 131 )
$7.95
—
$10.82
$7.16
—
$9.74
On Sale
When you need to block-off empty ports or unused O2 bungs, Stainless Works oxygen sensor plugs work like a charm. These stainless steel hex plugs are CNC-machined with male threads for effortless fitting. Use anti-seize lubricant when installing these plugs.
( 9 )
$12.35
$10.40
On Sale
Holley offers their accelerator pump diaphragms for all of their carburetors. These quality pieces ensure that the job is done right and help to keep your carb functioning like new.
( 112 )
$5.12
$4.61
On Sale
Precise timing of your engine is necessary for vehicle performance. Scott Drake removable timing pointers will help you maintain accurate settings when mounted to your timing chain cover. They're made from stamped steel with a black zinc plated finish, and come with mounting screw.
( 41 )
$10.30
$9.27
On Sale
Mr. Gasket flat black valve cover breathers add a stealth appearance to your engine compartment. They are available with or without a PCV fitting and offer a fast and easy way to customize your under-the-hood look.
( 18 )
$9.82
$8.84
On Sale
Replace your worn or missing throttle studs with the Holley recommended carburetor throttle lever studs.
( 95 )
$10.30
—
$11.33
$9.27
—
$10.20
On Sale
Scott Drake coil spring insulators are available in multiple designs to help cater to a number of different types of projects. They're available in long-lasting OE rubber construction for those who are replacing their factory springs and just need new coil spring insulators, as well as a high performance polyurethane for those who are switching over to performance springs but want to keep their stock ride height. Scott Drake has you covered, whatever you have planned for your ride's suspension.
( 39 )
$7.19
$6.47
On Sale
Upgrade your carburetor's hardware for maximum performance with the help of Holley. Their needle and seat hardware kits work with all Holley carbs with an adjustable needle and seat. Also keeping style in mind, these kits are offered in gold or black. Kits include adjusting nut, lock screw, gaskets, and O-ring.
( 19 )
$9.91
—
$10.94
$8.92
—
$9.85
On Sale
After putting time and money into your engine, make sure you protect it with a Mr. Gasket engine bag. These heavy duty bags are designed to last and protect your engine from dust, debris and moisture that can get into places you don't want causing damage to your pride and joy. Mr. Gasket engine bags are big enough for most engines and even fit over most engine stands and dyno carts.
( 13 )
$10.93
$9.84
On Sale
DeatschWerks' adapters are in their line of comprehensive fittings specifically designed for fuel system plumbing. Manufactured to applicable JIC and SAE standards, these adapters are constructed from heat-treated 6061 aluminum, and then anodized. They're available in a variety of styles and sizes to complete your job with the best fit for leak-free performance. Plumbing a fuel system is no place to cut corners, but you shouldn't have to pay a premium price for peace of mind. DeatschWerks adapters provide the optimum combination of strength, light weight, and fuel compatibility backed by a lifetime warranty.
( 12 )
$6.00
—
$12.00
$5.10
—
$10.20
On Sale
Racers sometimes prefer to race their cars without using a power valve. In these cases, the only way to properly block off the power valve circuit is with one of these Holley power valve plugs and gaskets. They'll fit any Holley carburetor with 1/2 in. x 28 threads, and block the circuit for all-out race performance!
( 6 )
$8.81
$7.93
On Sale
Scott Drake valve cover grommets offer a good seal for your classic. They are designed for your valve covers, when installing oil caps or a PCV valve. The grommets are available in a variety of styles and sizes. Order the model recommended for your application.
( 35 )
$8.23
$7.41
On Sale
Eliminate firing order errors with the use of these ACCEL wire markers. They are oil and grease-resistant and easy to read with black numbers on white rings.
( 63 )
$7.21
$6.49
On Sale
Scott Drake axle U-bolts replace your aging hardware with the proper fit, form, and function. Exact copies of the originals, they are not generic economy U-bolts. They have the correct swedging to provide a flat mounting surface against the axle housing and concours flanged mounting lock nuts are included for a factory appearance and safe installation. Scott Drake axle U-bolts are available in standard and a long style that is a 1/2 in. longer to accommodate applications using both 5 leaf springs and Traction Masters or other traction bars together. Set your suspension anyway you like with Drake Automotive U-bolts.
( 30 )
$11.33
$10.20
On Sale
If you're replacing the headlamps on your classic square body, don't forget the important retaining rings that hold them in place. Brothers Trucks offers replacement bezels for a wide range of Chevrolet and GMC vehicles. Crafted from aluminum and polished to a brilliant shine, these retaining rings will securely hold your headlamps and look great doing it. Additional notes: * For models with dual headlights per side * Quality stamped for a precise fit and look * Includes all factory mounting points for an easy installation * Sold individually
( 1 )
$10.82
$9.74
On Sale
These Mr. Gasket thermostat housing and water outlet gaskets provide a great seal for your stock application. They are available to fit most applications and offer a quality seal you can count on.
( 51 )
$5.99
—
$8.41
$5.39
—
$7.57
On Sale
These Holley air cleaner gaskets are designed to fit under the air cleaner for most carburetors. They will help prevent unfiltered air from entering your engine. Available for most carburetors, these Holley air cleaner gaskets will give your air filter assembly an airtight fit and keep the dirt and dust out of your carburetor.
( 34 )
$8.80
$7.92
On Sale
Milwaukee mini flush cutters produce consistent, precise cuts through thin wires and cable ties. The spring-loaded cutter design of these tools help to reduce your fatigue while using the tool, and the slim profile allows for better access to tight spaces. Milwaukee mini flush cutters feature over-molded grips that will not peel after heavy use or exposure to job site conditions. They are lightweight, built with machined precision, and feature rust protection, so you can work harder longer.
( 6 )
$12.99
$10.82
On Sale
Holley transmission kickdown lever extensions are handy parts used to extend the lower Ford OEM transmission kickdown lever when converting from a 2 barrel to a 4 barrel carburetor or as an effective mounting point for a transmission kickdown.
( 23 )
$11.01
$9.91
On Sale
Scott Drake window regulator hardware helps keep your windows rolling smoothly. Rollers, clips, bushings, and all of the little pieces you need are offered, and all provide classic fit, form, and function. Order the Scott Drake window regulator hardware designed to fit your application.
( 21 )
$1.95
$1.27
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
