Availability
On Sale
Royal Purple Premium High Performance motor oil combines premium synthetic base oils with proprietary additive technologies to exceed protection and performance requirements of new modern engines. These often include smaller displacements, turbo chargers, gasoline direct injection (GDI), and start/stop systems. Modern gasoline direct injection (GDI) engines have achieved levels of power and fuel economy never before possible in passenger car engines. As a result, smaller engines operate at much higher loads across all engine speeds. This has caused increased wear in critical areas of the engine, and created a destructive phenomenon called low-speed pre-ignition (LSPI). The unique, state-of-the-art additive technology in Royal Purple High Performance engine oils is designed specifically to address these issues, and help engines maintain performance and reliability.
( 281 )
$9.99
$8.99
On Sale
Liqui Moly Top Tec 6600 is a fully synthetic superior low-friction motor oil. The low viscosity ensures excellent cold start behavior, improves engine efficiency, and reduces fuel consumption. Innovative additive technology ensures excellent protection against wear, superb engine cleanness, and greater oxidation stability. Use with extended oil change intervals as per manufacturer. This lubricant is designed for gasoline or diesel engines where a motor oil according to current specifications is required or recommended. It is tested safe with catalytic converters and turbochargers. Product details: * Outstanding engine cleanliness * Excellent high and low temperature behavior * Excellent wear protection * High shear stability * High lubrication reliability * Long engine service life * Smooth engine running * Optimum stability to aging * Optimum oil pressure under all operating conditions * Ideal with turbochargers and catalytic converters * Saves fuel and reduces pollutant emissions * Approvals: ACEA C5, ACEA C6, API SP, BMW Longlife-17 FE+, ILSAC GF-6A, Jaguar / Land Rover STJLR.03.5006, MB-Approval 229.71, MB-Approval 229.72, Opel OV 040 1547 - A20 * LIQUI MOLY recommends this product for vehicles with the following specifications: Chrysler MS-12145, Fiat 9.55535-GSX, Ford WSS-M2C 947-B1, Ford WSS-M2C 962-A1
( 2 )
$11.99
$10.79
On Sale
Replace your old oil filler cap with a chrome plated cap from Mr. Gasket. They are available in a variety of attachment styles to suit your needs, and they add a fresh look under the hood.
( 18 )
$11.44
—
$11.95
$6.57
—
$10.30
On Sale
Fleece Performance oil cooler adapter O-ring kits will help to maintain a tight, leak-free fit on your diesel truck. Made from premium rubber, you can rely on a superior seal for optimal performance with Fleece O-ring kits.
Not Yet Reviewed
$8.99
$7.64
On Sale
Fleece Performance offers replacement O-rings for all of their Cummins turbo oil drain tube kits. Each service kit contains two O-rings for the drain adapter that inserts into the engine block, and two square-cut O-ring options for the turbo drain adapter (based on your kit).
Not Yet Reviewed
$4.75
$4.04
On Sale
Professional Products replacement oil filter elements are constructed from an extra-fine, double-mesh, stainless steel material. They are designed to filter out the smallest of particles, providing superior filtration for optimum engine performance gains. These washable replacement oil filter elements are easy to maintain, and that saves you time to focus on more important things, like staying ahead of the competition!
( 2 )
$7.99
$7.19
On Sale
aFe ProGuard D2 oil filters are designed to keep dirt, rust, and other contaminants from getting into your engine. They're made from a synthetic composite material that provides excellent filtration and performance. Additionally, each aFe ProGuard D2 oil filter is thoroughly tested to meet your expectations for form, fit, and function.
( 14 )
$10.50
$8.40
On Sale
These gleaming, chrome-plated, push-on breather/oil filler caps from Mr. Gasket fit over your oil filler tube. They have a side fitting for easy PCV hose hook up.
( 3 )
$12.93
$7.11
On Sale
Back by popular demand and with an improved formula, B&M Synthetic Trick Shift transmission fluid is specially formulated for modern-day electronic automatic transmissions. The 100 percent synthetic base was chosen for its foam inhibitors, superior resistance to oxidation, and its high shear stable control additives for superior resistance to viscosity loss between maintenance intervals. Synthetic Trick Shift is optimized with special friction control additives, preventing slip and shudder—and resulting in smooth positive shifts. Also, it contains special wear and seal protection chemistry commonly found in premium factory transmission fluids preferred by OE manufacturers. This formula is compatible with other automatic transmission fluids, but for optimum performance it's recommended that you drain and replace all transmission fluid with B&M Synthetic Trick Shift. Features include: * Ideal for racing, performance street, RV, and heavy-duty applications * Compatible with other synthetic transmission fluids * Premium synthetic blend for all vehicle makes * Recommended for electronic transmissions * Quart size container with easy-pour spout * Specially formulated for positive shifts * Signature B&M blue fluid color
( 5 )
$16.31
$10.60
On Sale
Mr. Gasket RTV sealant is the perfect answer to your engine sealing needs. Formulated to resist oil, water, and anti-freeze, this all-purpose gasket maker is ready to keep your engine fluids where they belong. Features include: * Fast-curing * Low-odor * Non-corrosive * Easy squeeze tube with application spout
Not Yet Reviewed
$13.74
$7.56
On Sale
Brembo Premium brake fluids have a higher boiling point that meets or exceeds the OE standard, offering superior resistance to the Vapor Lock and ensuring braking efficiency even at low temperatures. With high anti-corrosion properties that resist oxidation, Brembo brake fluid also allows for long-term unaltered chemical/physical characteristics of the fluid in the brake system—thereby preserving integrity of the system over time. Brembo DOT 4 brake fluid complies with DOT standards for Class 4, always guaranteeing safe braking. Select the size you need.
( 2 )
$8.97
$8.07
On Sale
Holley pioneered carburetors, so who better to clean them? Over time, carburetor internals and choke valves can accumulate gum, varnish, and dirt, reducing drivability and fuel efficiency. Holley Carburetor and Throttle Body Cleaner removes these deposits, restoring easy cold starts, smooth idle, and improved throttle response. It excels at cleaning throttle bodies and plates, carb linkages, PCV valves, heat risers, and other small engine components. Holley Carburetor and Throttle Body Cleaner's powerful formula dissolves grease and grime, often with no disassembly required. The formula is low VOC, so it's tough on deposits, but easy on delicate components including sensors and electronic chokes.
( 1 )
$11.79
$10.61
On Sale
Cataclean fuel system cleaner is designed to reduce carbon buildup and clean your vehicle's catalytic converter, oxygen sensors, fuel injectors, and cylinder heads. It does not alter fuel composition—and is available in blends for gasoline, for diesel, and for hybrid engines. The cleaner has been tested at an independent emissions-testing facility and is shown to lower total hydrocarbon emissions by up to 50 percent! Cataclean fuel system cleaner can also be used to fix drivability issues, such as power reduction, hesitation, and hard starts, or as a pre-treatment before an emissions test, and even to extend the life of your vehicle.
( 6 )
$13.99
$10.49
On Sale
Our Summit Racing™ mechanical analog gauge kits are more than good looking, they're an outstanding deal. They feature backlit gauges with black faces, mounting hardware, 12 V lighting, and oil pressure tubing for gauge kits that include an oil pressure gauge.
( 359 )
$72.99
$8.99
On Sale
Yukon Gear & Axle offers all of the small differential carrier replacement parts that you need to reassemble your carrier. Oil slingers, thrust washers, shims, baffles, guides, spacers, pins, bearing screw adjusters, and more are available to complete your differential carrier project. These components are available for numerous axle models, such as various GM, Ford, AMC, Dana, and Chrysler applications.
( 27 )
$5.99
—
$13.99
$5.09
—
$11.89
On Sale
Trail-Gear offers magnetic drain plug kits in your choice of aluminum or steel washers. Both are a great way of keeping metal from building up in the oil. Their low-profile design uses a recessed 10mm Allen socket. The aluminum washers are designed for transfer cases and G, W, and R Series aluminum transmissions. The steel washers are designed for axle housings and L Series steel transmissions.
( 4 )
$9.99
$8.49
On Sale
Add a little pizzazz to your engine with Mr. Gasket chrome valve cover breathers. These custom chrome breathers keep your crankcase properly vented and add a little shine under the hood. Mr. Gasket valve cover breathers are available in push-on or push-in styles.
( 47 )
$11.95
$7.77
On Sale
FiTech Go Spark round mounting brackets are designed for oil-filled ignition coils that measure between 2 1/8 in. and 2 1/4 in. in diameter. They provide a secure and stable mounting solution, often used with ignition systems and fuel injection distributors. Fabricated from steel with a chrome finish, the brackets include mounting hardware (a bolt and nut). These parts meet or exceed OE quality standards.
Not Yet Reviewed
$10.00
$8.50
On Sale
Mr. Gasket carburetor base gaskets are made from a highly durable cellulose/nitrile/rubber composites. These synthetic high-tensile strength, high-temperature gaskets have excellent sealing properties for oil, fuel, and coolant material. Carburetor base gaskets seal using low clamping pressure, conforming to and sealing imperfections. They're also precision die-cut to ensure a proper fit. The gaskets are available in a variety of styles and thicknesses for specific carburetor flange applications.
( 134 )
$9.14
—
$12.44
$5.31
—
$10.15
On Sale
Use Mr. Gasket valve cover grommets to ensure a positive oil seal. These grommets are made from neoprene and are available to fit most stamped or die-cast valve covers.
( 28 )
$7.51
—
$11.05
$6.08
—
$7.18
On Sale
Yukon Gear & Axle manufactures a full line of top-quality small parts to complete any job—including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers, and much more. These magnetic differential fill plugs will capture particles, keeping them out of your oil, bearings, and gears. They are available for a variety of vehicle and axle applications.
( 7 )
$10.89
$9.26
On Sale
Mr. Gasket baffled breather grommets are designed to virtually eliminate oil breather blowby. No tools are required for installation, as the baffled grommets simply replace the stock grommets. They are made to fit most valve covers that use 1.22 in. O.D. x 1 in. I.D. grommets. These grommets will not work with stud girdles, as they extend 1 1/4 in. into the valve covers.
( 9 )
$7.50
$6.75
On Sale
Hose ends may look like simple devices, but Fragola Performance Systems takes them very seriously. Fragola has spent several years researching, testing, and re-testing them to perfect the production of these Series 3000 race hose ends. Features include: * Unique one-piece design eliminates two brazed joints, minimizing potential leakage and improving flow and appearance * Two Viton® O-rings form a redundant seal to ensure no-leak service for the life of the part and they are impervious to fuel, oil, and coolant * Stainless steel lock wires to prevent galling and provide long service * Wider wrenching surface for no-slip installation * Tapered nipple for easy alignment and installation * J gauge threads for increased strength and durability * Bright-dipped anodizing for a show-quality finish * Improved entry angle on the socket for easy installation * Hose ends are manufactured from aerospace-quality aluminum and machined to mil spec tolerances
( 49 )
$6.99
—
$12.99
$6.29
—
$11.69
On Sale
Trail-Gear chassis tabs have the strength to hold your project together. These beefy flat tabs are crafted from quality steel in a selection of thicknesses, widths, and hole sizes, as well as straight and coped center and offset styles to make your build a success. They come lightly oiled. Mount most anything, securely, with Trail-Gear chassis tabs.
( 3 )
$2.99
—
$5.99
$2.54
—
$5.09
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
