Availability
On Sale
Trail-Gear double-shear brackets are made from 1/8 in. thick 4130 chromoly steel for fabrication strength. They're designed for double-shear mounting limit straps or seat belt tabs. The brackets are sized to mount a 1/2 in. bolt and require welding for mounting on your vehicle.
( 4 )
$9.99
$8.49
On Sale
Better than rubber, Trail-Gear leaf spring shackle bushings are made from hard-working polyurethane. Designed to fit inside the frame tube and the rear shackle mounts, these bushings will resist the twisting forces of your suspension. Don't just replace; upgrade your OE bushings to Trail-Gear leaf spring shackle bushings.
Not Yet Reviewed
$6.99
$5.94
On Sale
Trail-Gear steering knuckle replacement components are significantly stronger than OEM standards to make the most of your newer replacement steering arms. TG should be your first choice for knuckle hardware when repairing or upgrading your high-steer system.
( 3 )
$1.99
—
$5.99
$1.69
—
$5.09
On Sale
Trail-Gear zip tie tabs are weld-on brackets perfect for securing brake lines, cables, and air lines. They are available in two styles: formed/flanged and 1/8 in. thick flat. Both are crafted from 1008 steel and are sized for 1/4 in. wide zip ties. The formed style permits lines to be tucked under the flange, while the flat tabs allow for the easy mounting of almost anything. Route lines and cables neatly through your project with Trail-Gear zip tie tabs.
Not Yet Reviewed
$5.99
—
$9.99
$5.09
—
$8.49
On Sale
Trail-Gear shock reservoir mounts are for securing almost anything with an outer diameter of 2 or 2.5 in. They can be welded to most any size of round tubing, and TG offers them individually or with stainless steel clamps. The steel mounts are shipped raw and will require painting after welding. You can mount shock reservoir, fuel pump, fuel filter, and more with Trail-Gear shock reservoir mounts.
( 1 )
$7.99
$6.79
On Sale
Replacement bushings designed to fit Trail-Gear leaf springs are made of polyurethane to slide over the bolt smoothly with just the right amount of give to prevent your fittings from falling out when you're greasing up. Polyurethane is harder and stronger than rubber for durability and ride quality. Restore positive handling and control with Trail-Gear bushings. (Note: Make sure the grease you use is compatible with polyurethane.)
( 4 )
$6.99
$5.94
On Sale
Trail-Gear power steering fittings can handle the pressure. Be it low or high, TG has an offering of fittings to fit your specialty and OEM needs. From adapters that join your high-pressure steering hose to your IFS steering box—to elbow low-pressure barbed fittings, Trail-Gear will get you connected. Order the model needed for your application.
( 8 )
$6.99
—
$9.99
$5.94
—
$8.49
On Sale
Trail-Gear offers magnetic drain plug kits in your choice of aluminum or steel washers. Both are a great way of keeping metal from building up in the oil. Their low-profile design uses a recessed 10mm Allen socket. The aluminum washers are designed for transfer cases and G, W, and R Series aluminum transmissions. The steel washers are designed for axle housings and L Series steel transmissions.
( 4 )
$9.99
$8.49
On Sale
Trail-Gear wheel studs are available for front and rear wheel hubs and wheel spacers used on a variety of SUVs and pickup trucks. All TG studs are graded alloy steel fasteners that provide high-tensile strength and good wear resistance. Keep your wheels on with Trail-Gear wheel studs.
( 1 )
$3.99
—
$10.63
$3.39
—
$9.04
On Sale
Trail-Gear offers weld-on light bar tabs, which are CNC-formed from 1/8 in. quality thick 1010 steel, coped for 1 1/2 in. or 1 3/4 in. O.D. tubing, and have 1/2 in. sized bolt holes. These Trail-Gear weld-on tabs will also make great generic weld-on tabs for things like seats, seatbelts, or just about anything else you want to mount onto a piece of tubing.
Not Yet Reviewed
$9.99
$8.49
On Sale
Changing your suspension shackles? Trail-Gear greasable bolts will help. They offer three sizes and feature threaded zerk fittings that won't fall out when you're lubing up. The shackles are designed for use with TG leaf springs (not OE replacements). Secure your truck's shackles for a more stable ride with Trail-Gear greasable bolts.
( 1 )
$9.99
$8.49
On Sale
Trail-Gear tie rod end replacement boots are made to fit Trail-Gear tie rod ends, as well as many other popular tie rod ends. They're manufactured from a special compound of UV-resistant NBR (Naturally Blended Rubber). Trail-Gear tie rod end replacement boots are direct replacements for their hi-steer units and installation is a snap—all that's required is some grease and a pair of snap ring pliers.
( 2 )
$9.99
$8.49
On Sale
Anytime a lift kit is added, certain things like brake lines and driveshafts need to be checked and often lengthened. Trail-Gear brake line mounts are designed to secure longer braided steel brake lines—which will allow your vehicle's taller suspension to travel without using the lines for limiting straps. Safely secure braided brake lines with Trail-Gear brake line mounts.
Not Yet Reviewed
$9.99
$8.49
On Sale
Trail-Gear weld-in frame gussets are just what the doctor ordered for reinforcing tubing and plate in high-weight and high-stress areas. These strong steel gussets are ideal for tube chassis, roll cages, frames, or in most 90 degree corners where welding has occurred. There are numerous designs available--choose your Trail-Gear weld-in frame gussets for safe reinforcement.
( 8 )
$2.99
$2.54
On Sale
Need shackle parts? Trail-Gear has just what you need. Their shackle nuts are extra-strong and perfect for use with their leaf springs.
( 1 )
$3.99
$3.39
On Sale
Trail-Gear polyurethane line clamps secure brake lines, wiring, and hydraulic hose to tubes ranging in diameter from 1 1/2 in. to 2 in. O.D. The clamps are available in several sizes and include clamp blocks. Choose the size needed for your project. Features: * Black polyurethane clamp blocks * Zinc-plated steel SAE hose clamps * Each clamp block secures up to two lines
Not Yet Reviewed
$6.99
$5.94
On Sale
Trail-Gear base plates are designed to be welded to the cage tube end to provide a strong mounting base—after all, your roll cage is no place to skimp on strength! Each base plate is laser-cut in-house with Trail-Gear's own machine. They are 1/4 in. thick, with 3/8 in. bolt holes—and the plates are available in three styles: small 2 bolt, large 2-bolt, and large 4-bolt.
Not Yet Reviewed
$5.99
$5.09
On Sale
Trail-Gear chassis tabs have the strength to hold your project together. These beefy flat tabs are crafted from quality steel in a selection of thicknesses, widths, and hole sizes, as well as straight and coped center and offset styles to make your build a success. They come lightly oiled. Mount most anything, securely, with Trail-Gear chassis tabs.
( 3 )
$2.99
—
$5.99
$2.54
—
$5.09
On Sale
Trail-Gear U-bolt nuts are designed to fit TG U-bolts. They're 7/8 in. tall and 3/4 in. wide with a 9/16 in.-18 thread. Sold individually, you can purchase as many or as few as you need to secure your Trail-Gear U-bolts or stock your toolbox.
Not Yet Reviewed
$1.99
$1.69
On Sale
Don't risk breaking your snap rings on your nice maintenance job; pick up a couple of Trail-Gear's Birfield snap rings ahead of time to have on hand--you know ... just in case! These snap rings go on the outer stub shaft of your Birfield and keep the Birfs from drifting too far into the axle assembly. They are made of top-quality material and are offered for multiple applications.
Not Yet Reviewed
$6.99
$5.94
On Sale
Trail-Gear exhaust manifold stud and nut kits are a must-have for installing new aftermarket headers. These TG kits maintain an even clamping force to keep the header tight against the head, sealing the exhaust gasket properly. If the studs on your truck are old, it's cheaper and easier to replace studs than it is to remove broken ones. Choose Trail-Gear replacement stud and nut kits to do the job properly. They're available for fitment on a variety of make/model and engine applications.
( 1 )
$9.99
$8.49
On Sale
Hardware for your driveshaft--Trail-Gear bolts, nuts, and washers are the replacements you need. Providing the expected fit and function, these pieces are factory-level replacements. Make your driveshaft secure with Trail-Gear hardware.
( 1 )
$4.99
—
$5.99
$4.24
—
$5.09
On Sale
Keep your axles on, together, and positioned properly with Trail-Gear C-clips. Designed for their inner axles, these small but mighty snap rings will retain the shafts and prevent them from moving. Lock your TG inner axles in place with Trail-Gear C-clips. Order the clips designed for your vehicle and axle application.
Not Yet Reviewed
$6.99
$5.94
On Sale
Trail-Gear axle flange dust caps are made from zinc-plated steel and they allow you to use aftermarket Birfields without needing to use the 1994-97 tall FJ80 drive flanges. These are direct replacements. Missing a cap? TG has replacements.
Not Yet Reviewed
$6.99
$5.94
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
