Availability
On Sale
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 92 )
$1,349.95
$877.95
On Sale
Built for power and show, K&N 69 Series Typhoon cold air intake kits are engineered to dramatically reduce intake restriction, resulting in additional horsepower and torque. These air intake kits primarily feature a free-flowing, mandrel-bent aluminum tube induction system designed to fit many performance vehicles. The Typhoon kits come in one of three designs: cold air intakes, short ram intakes, or complete cold air intakes—which can be configured as either cold air or short ram intakes. Some air intake models feature high-quality tube and end cap finish options, including polished aluminum, and black, blue, red, or silver powdercoated, among other options. Order the K&N 69 Series Typhoon cold air intake kit that is suited to fit your vehicle application.
( 461 )
$839.99
$789.99
On Sale
Summit Racing™ forged crankshafts offer maximum strength and the best value for your dollar! Our crankshafts are non-twist forged from certified 4340 steel. They are put through several stages of heat-treatment, and then stress-relieved and shot-peened to provide the strength and reliability you demand for your high performance application. Each journal is micro-polished and a .125 in. radius is used for increased strength. Summit Racing™ forged crankshafts help you get the most in value and performance.
( 10 )
$889.99
—
$1,029.99
$849.99
—
$949.99
On Sale
When "rugged" is what you prefer most, MBRP XP Series muscle car exhaust systems should be your pick. These XP systems are built from tough, 16-gauge T409 stainless steel to withstand everything from salt to rocks and tar to grime! These mufflers and tips are mirror-polished stainless steel for complete muscle car systems that are as tough as nails. These MBRP systems are built to perform, too. Mandrel bends and high-flow mufflers boost torque and horsepower, while delivering a rich, mellow sound, making your muscle car everything it should be. And, since MBRP understands that being in a garage on a sunny weekend isn't any fun, their systems are no-hassle installs with common hand tools; simply bolt them on--no welding is required. Get the ruggedness you prefer with the performance, sound, and style that is true muscle car--MBRP XP Series exhaust systems.
( 13 )
$819.99
—
$1,154.99
$769.99
—
$1,104.99
On Sale
Performance is most important, but looks ... well, they're important, too. XForce exhaust systems are uniquely engineered and designed to deliver both desires, plus great audio notes. These direct-fit components are fabricated from 304 stainless steel and offer unrestricted flow to fit your ride with increased power, bolder sound, and fabulous looks. You'll have what you want for your car or truck with an easy, bolt-on upgrade XForce exhaust system. Order the size, style, and configuration recommended for your application.
( 66 )
$945.00
—
$1,255.50
$792.00
—
$1,052.19
On Sale
Flowmaster Force II cat-back exhaust systems have been designed using the latest technology available--providing improved acceleration, passing power, and fuel mileage. The key to these performance upgrades is the use of mandrel-bent tubing, which allows for superior exhaust gas flow. The Force II systems are built with aluminized steel to resist corrosion. Order the exhaust fitment for your particular make and model.
( 20 )
$1,049.95
$787.95
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 102 )
$1,049.95
—
$1,699.95
$769.95
—
$934.95
On Sale
These Flowmaster Scavenger Series Elite headers open up airflow for serious added power. All Scavenger Series Elite headers are made of high-quality stainless steel and have been polished ceramic coated. They are available in several styles, such as shorty, full-length, and block hugger to accommodate a large variety of vehicles. They have a standard flange design and include bolts and gaskets for installation. Get yourself a set of these Flowmaster Scavenger Series Elite headers to keep yourself ahead of the competition.
( 68 )
$1,159.95
$753.95
On Sale
With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 215 )
$1,199.95
—
$1,471.95
$769.95
—
$944.95
On Sale
Hooker introduces the RacingHeart 3-Step Dragster headers. The big block Chevy downswept headers feature 2.125 in./2.25 in./2.375 in. stepped primary tubes and 4.5 in. collectors with merge spears to maximize exhaust flow—resulting in horsepower and torque gains over a broad rpm range. RacingHearts are available in chrome plated mild steel or polished 304 stainless steel. Product details: * Collectors feature merge spears for increased exhaust velocity * 3/8 in. thick header flanges for strength and maximum sealing surface * Features bungs for Evac systems (Evac tubes and plugs included)
( 1 )
$1,399.95
$909.95
On Sale
MBRP Black Series exhaust systems maximize exhaust flow and minimize exhaust temperatures—so your truck will use less gas, last longer, and perform better. The systems are built from aluminized steel, with a durable high-heat black powdercoat finish. Fully mandrel-bent tubing, with minimal bend degree angles, allows the exhaust to exit quickly; and the seams are fully sealed to resist rust. Black Series systems are available for gas truck/SUV, diesel, and muscle car applications. Order the model designed for your specific vehicle—and add some style and performance! Additional features and benefits: * Road, track, and dyno-tested * Vehicle-specific muffler design * Bolt-on, no-weld design for hassle-free installation * Direct-fit to the OEM hangers; clamps and accessories included * One-year coating warranty; 3-year workmanship warranty
( 31 )
$824.99
—
$1,139.99
$784.99
—
$1,079.99
On Sale
These Summit Racing™ AutoMeter Phantom analog gauge Pro Packs are designed for custom applications such as street rods, Pro Street, or anywhere you want a personalized look. They feature the same AutoMeter quality, but with their black trim rings and white faces, the Phantom series gauges offer you a distinct, alternative look. The Summit Racing™ AutoMeter Phantom analog gauge Pro Packs feature uniform soft glow lighting, along with red and green light bulb covers, to provide a personalized effect.
( 1 )
$966.94
$838.94
On Sale
Flowmaster Signature Series exhaust systems are manufactured from brushed 304 stainless steel for years of trouble-free service and high-end good looks. These premium systems are fitted with Flowmaster's Signature Series mufflers for maximum performance and sound, along with black chrome tips (not on all systems), delivering exhausts that look as good as they sound. They are hand TIG welded for exceptional strength and can be easily installed utilizing factory mounting points. Select the system designed for your vehicle.
( 1 )
$1,045.95
—
$1,410.95
$784.95
—
$1,058.95
On Sale
FiTech Easy Street 600 hp EFI system fuel injection master kits deliver an electronic fuel injection kit with a fuel delivery solution. Each master kit pairs the classic gold appeal and modern performance of FiTech's Easy Street 600 hp throttle body with one of several inline or in-tank fuel delivery solutions, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Easy Street TBIs look like factory carburetors, but that's where the similarities end. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to ¬rev up. It accepts the tachometer signal from the coil negative, an HEI distributor, or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture, resulting in smooth performance from idle to high rpm. Choose the FiTech Easy Street master kit with your preferred fuel delivery system. FiTech Easy Street is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Fuel delivery options: * Go Fuel universal in-tank pump modules—255 lph or 340 lph—can be used on tanks with a depth of 6 to 15 in. A feed line, vent, and return are machined into the module for easy high-pressure line connections. Gaskets, terminals, and clamps are included. * Go Fuel universal in-tank regulated pump module—255 lph or 340 lph—single line system with a depth of 6.5 to 15 in. Pump has -6 AN pressure port and a 4-Bar (58 psi) regulator and suitable for most EFI-ready tanks * Go Fuel single pump fuel cell module—returnless--340 lph--billet top assembly is machined with a 2 in. filler assembly, as well as an internal regulator to maintain 58 psi. The module is machined to fit fuel cells with a 12-bolt flange or can be installed on any tank with the supplied hardware. * Go EFI inline pump kit—255 lph external pump suitable to support engines producing up to 600 (naturally aspirated) hp. Supplied with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
( 7 )
$1,101.99
—
$1,111.99
$991.79
—
$1,000.79
On Sale
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$982.95
—
$2,004.95
$759.99
—
$1,044.99
On Sale
Installing a Titanium Signature Series fuel system has never been easier, or more affordable. Designed to simplify installation, FASS's No-Drop Series diesel fuel system kits include their fuel sump, which prevents the need for removing your fuel tank. Better still, these No-Drop kits offer significant savings over buying a Titanium Signature Series fuel system and sump kit separately! They include everything you need for a simple, straightforward FASS installation--and nothing you don't. Select the kit designed for your diesel truck. No-Drop kit benefits: * Increases fuel lubricity at least 10 percent * Can increase 3 times the life of injection components * Removes over 99 percent of the water from fuel * Eliminates entrained air and vapor * Filters out debris down to 2 microns absolute * Provides far more fuel flow than OEM * Drastically simplifies installation
Not Yet Reviewed
$849.00
—
$1,099.00
$764.10
—
$989.10
On Sale
MBRP Pro Series exhaust systems are built for performance auto enthusiasts looking for a great quality exhaust. They're constructed from T304 stainless steel for optimal durability and reliability. Pro Series systems deliver a rich, mellow exhaust note and over 70 percent increased exhaust flow. They include the necessary pipe and muffler, and utilize OEM hangers for complete bolt-on cat-back (or downpipe-back) exhausts. These kits are available with polished stainless steel exhaust tips or carbon fiber exhaust tips for a beautifully finished look. These units are available in a variety of configurations for gas truck/SUV, diesel, and muscle car applications—so you can choose which design is best for your vehicle. MBRP offers a no-hassle lifetime warranty on Pro Series exhaust systems.
( 47 )
$824.99
—
$1,154.99
$774.99
—
$1,104.99
On Sale
The MBRP Installer Series exhaust systems give you the best of both worlds in one complete package. They provide great sound control—as well as improvements in torque and horsepower. These systems are constructed from heavy-duty, 16-gauge steel with an aluminized coating and an extra-thick layer of aluminum silica on the seams, an area often left exposed to rust. The units are available in hundreds of configurations to suit your vehicle's exhaust needs.
( 397 )
$794.99
—
$914.99
$754.99
—
$864.99
On Sale
The Body Armor 4x4 Ambush Series Ram rear bumpers are an excellent replacement for an outstanding price! Matching the front bumper of the same name, these rear base bumpers are manufactured from 3/16 in. and 1/4 in. cold roll steel and given a 2-stage lightly textured black powdercoat finish to help prevent corrosion. There are cutouts to accommodate OE rear parking sensors, as well as cutout provisions for mounting a pair of Body Armor 3 Series 3 in. dual row LED cube lights (not included), if you so desire. Stylish mesh screens are also provided if you choose not to mount optional auxiliary lighting. The Ambush Series bumpers also have integrated shackle recovery mounts built right into the bumper. A vehicle-specific mounting kit is included to provide an easy bolt-on installation. Give your Dodge Ram a new look while increasing protection with the Ambush Series rear bumper from Body Armor 4x4.
Not Yet Reviewed
$1,100.00
—
$1,139.00
$935.00
—
$968.15
On Sale
Fluidyne high performance radiators feature aluminum end tanks and 100 percent NOCOLOK brazed aluminum cores, rather than the epoxy-bonded types used by others. These cores are built using high-efficiency cooling fins that deliver maximum performance and durability. The radiators are offered in universal sizes, as well as exact fit, with all brackets, fittings, and hoses set up to match the original equipment layout for easy installation—and they meet ISO 9001 standards for quality. Fluidyne radiators are available in crossflow and downflow styles, and a range of sizes for vehicle-specific applications; some models also include a transmission cooler. Keep your ride cool on the hottest days or at the track with a Fluidyne radiator.
( 29 )
$909.00
—
$1,170.00
$772.65
—
$994.50
On Sale
Holley Sniper EFI fabricated Race Series intake manifolds utilize a larger intake plenum for max effort engines and boosted applications. These manifolds feature 5mm (13/64 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. With their removable tapered top, increased velocity and more evenly distributed airflow to all cylinders is a guarantee! Race Series intakes also include 3/8 in. fuel rail kits, -8 AN fittings, and crossover-braided line capable of supporting 750+ hp. They're available in multiple anodized colors, and every manifold has the Holley Sniper EFI logo.
( 1 )
$1,399.95
$769.95
On Sale
FiTech Fuel Injection brings you the Go EFI 2 Barrel 400 HP classic gold fuel injection system. This is a ready-to-run unit that strays away from the programmable features—and sticks to the basic functions necessary to get the best performance and economy out of your street and mild performance engine. FiTech once again allows you to ditch that old carburetor and advance into the EFI world at the most affordable price on the planet! Features include: * Self-tuning fuel injection * High-flow aluminum throttle body * Voltage Control fuel pump control * Wet flow technology; swirl-spray annular discharge design * Wideband oxygen sensor and TPS sensor * Two-injector system is capable of supporting 400 HP engines * Built-in fuel pressure regulator * Hand-held tuner * Integrated ECU * Air/fuel ratios can be optimized on-the-fly as you drive
( 6 )
$1,100.99
$990.89
On Sale
FiTech Go Street 400 HP EFI system in-tank pump fuel injection master kits include fuel delivery solutions to make converting your carbureted vehicle to EFI easier. These systems feature the Go Street EFI ready-to-run throttle body that sticks to the basic functions necessary to get the best performance and economy out of your street and mild performance engine. It delivers the benefits of quick starts, smooth idle, and self-learning technology. It works with most ignition systems and fits most intake patterns to replace your old carburetor. Each Go Street EFI throttle body is supplied with a handheld touch screen controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. Options for your fuel delivery system: * Go Fuel single fuel cell pump module is ideal for running a fuel cell or custom tank. It features a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go Fuel in-tank pump modules--choose either a 255 lph or 340 lph in-tank pump. Both can be used on tanks with a depth of 6 to 15 in., and each has a billet top assembly designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Gaskets, terminals, and clamps are included.
( 1 )
$1,047.99
$943.19
On Sale
Holley Sniper carbureted fabricated intake manifolds are budget-friendly, sheet metal style intake manifolds. Each manifold is precision-fixtured and welded for a perfect fit and structural integrity. They are available for carbureted Chevy LS, Ford Coyote, small block Chevy, big block Chevy, and small block Ford engines. Features include: * Available for single or dual carburetor applications * 3mm (1/8 in.) thick T6061 sheet aluminum construction * More durable than competitive intakes * Bead-blasted silver or black anodized finishes * 100 percent TIG-welded * Custom Holley Sniper logo
( 37 )
$849.95
$764.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
