Availability
Showing In Stock Items. Show All 16 Items.
On Sale
MSD Atomic transmission control modules are designed to adjust the operating parameters of later model electronically controlled 4-speed automatic overdrive transmissions. They're simple to configure with the supplied hand-held monitor--no PC required. You now have access to adjust shift points, adjust torque converter clutch behavior, select different levels of shift firmness, select between auto-shift and manual shift mode, and activate dyno mode to deliver repeatable chassis dyno results. The included hand-held monitor connects to them and can be left in place as a dashboard to monitor the transmission in real time, or can be disconnected when the configuration is complete. Once installed, these modules need only a few basic parameters to complete the initial setup. First, select the type of transmission you are using--all supported transmission types are listed in the menu. Other required fields include the number of engine cylinders, rear-end gear ratio, and tire height. Once this has been completed, you can now start and drive the vehicle, while taking advantage of the advanced setup menu items to dial-in the transmission to your liking. You can feel the results in real-time as a passenger manipulates the parameters and monitors the real-time data. Data available for viewing includes engine speed, vehicle speed, throttle position, transmission fluid temperature, shifter position, and commanded gear. Best of all, the MSD Atomic transmission control modules are available as completely stand-alone units or Brainwave-compatible for the Atomic EFI systems. A transmission controller harness is sold separately.
( 19 )
$899.95
$808.95
On Sale
These Summit Racing™ manual transmission shifter and installation kit Pro Packs have been put together to provide your vehicle with quick, precise shifts every time. They feature a Hurst Competition Plus shifter, a shifter ball, and an installation kit for your specific transmission model. If you're ready to upgrade your shifter, then pick up one of these Summit Racing™ manual transmission shifter and installation kit Pro Packs and make smooth, accurate gear changes, shift after shift.
( 33 )
$899.90
—
$997.90
$808.90
—
$897.30
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 103 )
$949.95
—
$1,699.95
$769.95
—
$1,033.95
On Sale
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$849.95
—
$1,049.95
$763.95
—
$943.95
On Sale
B&M Pro Bandit shifters are the ultimate combination of design, function and sheer performance. Pro Bandit shifters feature narrow body construction with an easy-to-operate, gate-type mechanism for consistent shifts, round after round. CNC machined from 6061-T6 aluminum, Pro Bandit shifters are then polished and clear anodized for corrosion resistance and great looks. Other features include a reverse lockout that meets both NHRA and IHRA requirements, a built in neutral safety switch, and a rear exit shifter cable.
Not Yet Reviewed
$899.95
$808.95
On Sale
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$899.95
—
$1,099.95
$808.95
—
$988.95
On Sale
Hays Street 650 clutch conversion kits are designed to handle highly modified engines up to 650 hp naturally aspirated (600 hp for forced induction and nitrous combinations). The new 26-spline versions work in conjunction with a modern 5- or 6-speed transmission swap. These are true street/strip clutches for spirited high performance driving or frequent track use. The high performance dual-friction disc utilized in the Street 650 has an upgraded spring hub with heavy-duty damper springs to handle greater shock loads versus a standard damper spring. The disc features a sintered metallic friction surface and an organic friction surface. It does a great job at dissipating heat and fighting the slippage found in ordinary discs, along with providing the smooth engagement characteristics of a street-style clutch. These conversion kits also provide an upgraded heavy-duty pressure plate to round out the performance clutch. The Street 650 is a great choice if you visit the track often. Order the model recommended for your vehicle application. Features and benefits: * Upgraded damper springs deliver up to 30 percent more clamping pressure than stock OE clutch * Dual-friction disc offers the best of both worlds—smooth engagement and excellent holding capacity * All Street 650 clutch kits come complete with pressure plate, disc, throwout bearing, and alignment tool
( 6 )
$974.95
—
$1,099.95
$876.95
—
$988.95
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 80 )
$899.95
—
$1,049.95
$808.95
—
$943.95
On Sale
B&M Traveler torque converters are designed for use in motor homes, tow vehicles, or other heavy-duty applications where a slightly higher stall speed is helpful in getting the vehicle moving. Stronger than a stock converter, these Travelers have been internally modified to provide about 300 rpm more stall speed. This helps in initial acceleration without sacrificing normal highway operation. Pressure tested, fully balanced, and manufactured for long life, these Traveler converters will get you moving and on your way.
( 3 )
$899.95
$808.95
On Sale
Hays offers Hot Street clutch kits for a variety of Chevrolet and Ford applications from the 1950s and up. They deliver ultimate Street/Strip performance through matched components. A 10.5 in. or 11 in. metallic disc with 6-spring helix sprung hub provides superior grip needed for the strip, while the matched diaphragm-style pressure plate provides a pedal feel comfortable enough for the street. This ensures 30 percent more clamping pressure and transmits that through a billet steel flywheel. These matched components provide the peace of mind purchase you've come to expect over the years from Hays. Order the kit recommended for fitment on your vehicle. Additional details: * Kit includes billet steel flywheel, pressure plate, metallic disc, pressure plate bolts, dowels and alignment tool * Street/Strip clutch kit provides excellent holding strength with a smooth daily driver pedal feel * Designed for power levels up to 550 naturally aspirated horsepower (500 hp for forced induction/nitrous)
Not Yet Reviewed
$1,299.95
$974.95
On Sale
Looking for an edge at the drag strip? Then order a Summit Racing™ automatic transmission electric shifter Pro Pack. Kits include a Hurst Quarterstick shifter, a shifter cover, an electric solenoid, and a mounting bracket. Just add an rpm-activated switch (sold separately)—and you'll have a leg up on the competition, round after round. Order the Pro Pack designed for your transmission application.
Not Yet Reviewed
$1,018.85
$915.95
On Sale
The MSD Pro-Billet multi-channel total loss flywheels ramp up performance in a way that has to be felt to be believed. This flywheel is half the weight of the stock unit but is CNC-machined from 7075-T6 aluminum, providing absolute accuracy and incredible strength without all of the weight. The reduction in weight produces quick throttle response while putting less stress on other engine components. Maximize your performance by minimizing weight with MSD Pro-Billet multi-channel total loss flywheels.
Not Yet Reviewed
$949.95
$853.95
On Sale
Hays billet aluminum flywheels are popular with many road racers and serious drag racers--shouldn't you have one? They are manufactured from certified billet material to handle the stress of high rpm and the severe punishment of racing. Upgrade to a precision-machined and engineered Hays billet aluminum flywheel. Features include: * SFI-approved--legal for use in racing classes that require SFI certification * Forged from 7075 T-6 or 6061 T-6 alloy for weight reduction and excellent heat dissipation * Forged, heat-treated steel ring gears and replaceable 1045 steel friction surfaces attached with high-grade fasteners * CAD-designed for optimum performance and reliability * Offered in internal, external, or neutral (zero) balanced versions * Available for a wide variety of engines Note: When choosing a flywheel, remember that a heavier flywheel stores more energy. A heavy car requires more power (or inertia) to launch without bogging the engine and needs a heavier flywheel. Lighter flywheels create less inertia at launch but will accelerate faster through the gears.
Not Yet Reviewed
$849.95
$763.95
On Sale
Hays Diesel 850 clutch kits are an excellent upgrade from your current clutch—and are designed to handle diesel engines with up to 850 lbs.-ft. of torque. Precisely engineered, these clutch kits include a matched pressure plate and a heavy-duty, high-torque ceramic button-style clutch disc, which utilizes world-leading Carlisle (Wellman) sintered buttons to provide increased holding and torque capacity, along with additional clamping force. With a Hays Diesel 850 clutch kit upgrade, you can put more power to the ground and/or haul full-size loads with confidence! Hays Diesel 850 clutch kit additional notes and features: * Excellent clutch for torque levels up to 850 lbs.-ft. or 100 to 200 hp above stock * Offers increased holding and torque capacity needed for towing full-sized loads * Ceramic button disc provides more aggressive engagement with a stock pedal effort * Kit comes complete with pressure plate, clutch disc, throwout bearing, alignment tool, and instructions
Not Yet Reviewed
$974.95
$876.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
