Availability
Showing In Stock Items. Show All 72 Items.
On Sale
FUELAB flange mount variable speed fuel pumps offers ease of use with fuel cells or fabricated reservoirs. These SAE 10-bolt H/E Series brushless screw pumps are able to support 1,200 hp at 60 psi, while consuming less than 10 amps of current, making them some of the most efficient single pump offerings available anywhere. They are great for boosted applications, as well as with 100 psi pressure capability, while still exceeding 400 lph and only 13 amps of current draw. Features: * Twin screw rotor pumping mechanism * Lightweight super-efficient DC brushless motor minimizes current draw * 12 V vehicle electrical system compatibility * Integrated controller with PWM speed control * Compatible with gasoline, diesel, methanol, and ethanol * Rated to flow 250, 350, or 500 lph at 45 psi, 125 psi max * Compact, lightweight design is less than 2.5 lbs. * Overall length 8 in. and pump diameter of 2 in.
Not Yet Reviewed
$1,199.00
—
$1,249.00
$1,079.10
—
$1,124.10
On Sale
Holley SBF Hi-Ram EFI intake manifolds with side-mount tops are available for the 8.2 in. or 9.5 in. SBF Ford applications, and come with either a 95mm or 105mm Ford 5.0L throttle body flange side-mount top. The runner length and tapered cross-section design will perform well for a wide range of engine configurations. Holley's engineering team redesigned the water crossover passage to allow room for distributor phasing. The SBF Hi-Ram EFI intake manifolds have aggressive, bold, race-bred styling that's perfect for drag race, muscle car, off-road, pulling trucks, street rod applications, and more! Additional features and specs include: * Cast aluminum construction with satin silver finish * Designed for side-mounted throttle bodies (Ford 5.0L throttle body fitment) * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * Allows room for designing boosted applications * A low-profile distributor will be needed when using this manifold
Not Yet Reviewed
$1,299.95
$844.95
On Sale
Fitech introduces the all-new Go EFI Classic fuel injection systems in a stunning carburetor gold finish. Fitech EFI re-captures the old-school look while maintaining its innovative, award-winning patented design—eliminating cold start issues, hesitation, vapor lock and flooding. This innovative system hides the injectors and has an externally mounted ECU, so it can be mounted wherever you want to ensure a true carburetor look is maintained. The Go EFI Classic is a self-tuning fuel injection system rated for up to 650 hp. The more you drive the more it adapts to your personal style—perfect for your everyday driver, weekend Street Machine, or Bracket Racer. Additional features: * Dual bolt pattern; designed to fit both the spread bore and 4150 square bore flange * Integrated ignition timing control and coil driver * High-resolution, full-color touch screen for setup, tuning, and gauge display * Bosch LSU 4.2 wideband oxygen sensor for real-time fuel mapping * Clamp-on oxygen sensor kit for leak-free installation * High-flow aluminum throttle body with 45mm diameter venturi to increase airflow * Designed for use with original distributor, factory throttle linkage, and most four barrel manifolds
( 4 )
$1,144.00
$972.40
On Sale
PureFlow AirDog II-5G Fuel Air Separation Systems are the next generation in fuel delivery for a variety of diesel engine applications. The 5G is designed to be the longest lasting, most efficient, and quietest lift pump. AirDog II-5G utilizes a diaphragm-style fuel pressure regulator, allowing the pump to be boost referenced and adjusted from 7-70 psi. The 5G fuel/air separation system features a 4-bearing motor with an intermediate shaft that improves reliability and reduces pump noise. A demand flow design allows the pump to only send the necessary amount of fuel to the engine. The dual feed motor supplies fuel to both sides of the gerotor pump to decrease air bubbles that cause cavitation. The 5G system features larger 3/4 in.-16 O-ring boss inlet and outlet ports. A 7/16 in.-20 (-4) low-flow return is used to prevent aeration in the fuel being sent back to the tank. Order the model recommended for your vehicle. Additional features: * 220 or 165 gph pump models available * 4-beating motor with intermediate shaft * Larger ports over previous pumps * Diaphragm fuel pressure regulator * Demand flow design * Reduced aeration from low flow return
Not Yet Reviewed
$854.00
$769.00
On Sale
FUELAB Gold fuel cell quick-service surge tanks (QSST) come base as a "bare" unit without a lift pump and with an empty fuel pump hanger in the surge tank. (FUELLAB has options to add three different lift pumps, five different surge pumps, remote fuel fill, fuel level sensor, and a fuel tank vent kit.) Quick-service surge tanks are compatible with both brushed or brushless lift and surge pump options. Product features: * Quick Service Surge Tank for fast pump service * Provides protection against fuel slosh from standard fuel cell pump hangers * Fits the industry standard 24-bolt fill plate bolt pattern * Gasoline, Ethanol (E85), and Methanol compatible * Rollover flap protection * Fuel tank vent with rollover protection * Gaskets and hardware included * Stock with empty fill neck hole to give you options * WHAT MAKES THE FUELAB QSST BETTER? FUELAB's Quick Service Surge Tank is exactly that. You can service your Surge Tank Pumps in minutes. With only 10 bolts on top, you can pull the Surge Tank Pump Hanger out of the top of the cell and service your pumps quickly! Whereas most competitors require you to pull the entire 24 bolt plate, then remove the surge tank housing from the bottom to finally access your pumps. FUELAB units are compatible with Brushed and Brushless pumps for both the Lift Pump and the Surge Tank Pump(s), or a combination of the two using the same Base Plate. Base plates come standard in two enticing anodized colors, Titanium and Gold. Kit includes: * FUELAB QSST base plate and surge tank * Fuel tank vent with rollover protection * Lift pump hanger with pump mount * 3-Terminal for option of brushed or brushless lift pump * Fuel level sender block-off plate and gasket * Open fuel filler hole for customization (gasket included) * Empty dual pump fuel surge tank hanger (fits brushed or brushless pumps) * Corrugated fuel hose for lift pump into surge tank (NOTE: Don't forget to add on your FUELAB Fuel Filler Kit, Fuel Level Sender, and Fuel Cell Vent Kit!)
Not Yet Reviewed
$1,175.00
$1,057.50
On Sale
Summit Bucks
FUELAB high-efficiency EFI inline twin screw fuel pumps are available in a variety of flow rates, ranging from 79 gph (300 lph) to 291 gph (1,100 lph); and horsepower ratings from 650 to 2,800 hp. These electric external street/strip pumps are black anodized for beauty and protection from rust and corrosion. They're offered in universal and remote mount options.
Not Yet Reviewed
$1,149.00
—
$1,199.00
$1,034.10
—
$1,079.10
On Sale
Summit Bucks
FUELAB in-tank twin screw brushless fuel pump kits are available for a variety of flow rates, ranging from 79 gph (300 lph) to 291 gph (1,100 lph); and horsepower ratings from 650 to 2,800 hp. The pumps are black anodized for protection and long-lasting performance—and include a 65 micron straining filter. These aftermarket replacements offer an array of features: --- Pump features: * Compatible with gasoline, diesel, methanol, and ethanol * Twin screw rotor pumping mechanism * 125 psi max operating pressure * 650 to 2,800 hp power support (depending on model) at continuous speed (pump gas, naturally aspirated) * Higher efficiency means less current draw and less noise * Superior priming capabilities * Greater resistance to cavitation (vapor lock) --- Motor features: * Lightweight super-efficient DC brushless motor to minimize current draw * Powerful high flux density Neodymium rare earth magnets * No motor brushes to wear out or corrode (low-sulfur diesel, no problem) * Wet motor design, no dynamic shaft seals that can wear out --- Controller features: * 12 to 16 V vehicle electrical system compatibility * Pump controller included for full speed, PWM (or 0-5 V input speed control, some models) * Continuous duty motor speed --- Construction features: * Compact, lightweight design, less than 3 lbs. * Billet aluminum construction with anodize per MIL-A-8625, Type II * Long life, multi-fuel compatible fluorosilicone static seals * Accepts standard or port style -8 AN fittings --- Pulse Width Modulation compatibility (PWM) * Compatible with most aftermarket ECU's with PWM output frequency * Compatible from 100Hz to 5000Hz * AEM * ECU Masters * Fueltech * Haltech * Holley * Link Engine Management * Megasquirt
Not Yet Reviewed
$1,099.00
—
$1,199.00
$989.10
—
$1,079.10
On Sale
Mishimoto intercooler pipe and boot kits improve the power and efficiency of your rig. Unlike restrictive power-robbing factory pipes, Mishimoto polished aluminum intercooler piping is engineered to eliminate unnecessary bends, and needed bends are mandrel-bent to keep the airflow smooth and flowing. And, of course, an increase in airflow results in more power and lower EGTs to support your diesel rig at any power level. These kits include their silicone boots with DuraCore technology that provides superior resistance to heat, pressure, fuel, and oil to effectively increase their life and prevent leaks and blowouts. Adding even more to these kits are Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. Intercooler pipe and boot kits include aluminum Mishimoto M-logo badges. Mishimoto intercooler pipe and boot kits are ideal upgrades in reliability and performance.
( 7 )
$1,026.95
$924.26
On Sale
EFI conversions made easy--FiTech Go Street EFI 400 hp systems are true carburetor replacements. And the price is a "Go" as well! Good for up to 400 hp, these 4-injector throttle bodies simply swap out your current 4-barrel carburetor for EFI performance. You don't have to mess with the ignition at all. It's too easy not to go for it--FiTech Go Street EFI 400 hp systems. Features include: * Self-tuning fuel injection * Latest Bosch 4.2 wideband oxygen sensor * ECU is mounted on throttle body * Universal base fits any 4-barrel manifold * Throttle linkage suits most transmissions * Three fuel inlet connections * Voltage control fuel pump control * Wet flow technology * Swirl spray annular discharge design * Built-in fuel pressure regulator * Designed for applications making at least 6 in. of vacuum at idle
( 219 )
$869.00
—
$1,054.99
$782.10
—
$949.49
On Sale
Holley Sniper EFI Autolite 1100 fuel injection systems let you convert your classic Autolite 1100 carburetor to EFI. These units offer superior throttle response and WOT power over the carb—and you will likely experience increased fuel economy. Put an end to cold start issues, hesitations, vapor lock, and flooding with the accuracy of EFI! You can also use the Sniper EFI to control the ignition timing, taking electronic fuel injection to the next level. These Holley upgrade systems feature a 100 lbs./hr. fuel injector capable of supporting 175 hp on naturally aspirated engines. For your high performance needs, look to Holley! Standard Sniper EFI system features: * Bolt-on Autolite 1100 carburetor replacement * Throttle body-mounted ECU; no extra boxes to mount * Only four wiring connections required: Battery +, battery -, switched ignition, and rpm * Internal fuel pressure regulator eliminated the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!); no laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and fuel pressure regulator—for years of dependable service * Included clamp-on oxygen sensor kit for 2 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Systems are an ideal conversion kit for 1963-67 Inline 6-cylinder Ford engines from 144 ci. to 300 ci.
( 5 )
$1,099.95
$988.95
On Sale
Holley LS Modular Lo-Ram EFI intake systems have a top-feed plenum entry configuration, designed to allow the currently available Hi-Ram 105mm plenum tops to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications and was conceived to package with an air-to-water plenum-mounted intercooler—with a shorter overall height than is possible with other existing intake manifolds. Using a modular design, the top-feed plenum configuration with 105mm top keeps the overall height at just 9.07 in.! Additional features and specs include: * Cast aluminum construction * Modular design allows the use of the included top-feed plenum entry * Designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads * Will also work with OE or aftermarket cylinder heads * Designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000 to 8,000 rpm, depending on application * Low height to aid the packaging of a plenum-mounted air-to-water intercooler in a top-feed configuration (or to fit under a stock or mildly modified hood in the front-feed configuration) * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits come with two sets of brackets—a set for long (usually standard length) fuel injectors, and a set for short (such as Pico or LS7) fuel injectors
( 1 )
$1,099.95
$988.95
On Sale
When it comes to fuel injection versus carburetors, new school is just too cool. FiTech Go EFI 4 600 hp self-tuning fuel injection systems have the ECU mounted on the throttle body for greater self-containment, clean installation, and easy setup. These trick systems fit any 4-barrel intake manifold, and are designed for use on engines from 250 to 600 hp. They feature a built-in fuel pressure regulator, an ECU that finds the best tune and self-adjusts to it—and the ability to change air/fuel ratios and ignition timing on the fly. Each system has a hand-held controller with a touch screen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. FiTech Go EFI 4 600 hp self-tuning fuel injection systems leave the guesswork behind. Order the model with options best-suited for your application. Additional features: * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Adjustable fan control switch * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors * Wet Flow swirl spray annual discharge obtains complete atomization * Voltage-controlling fuel pump control reduces power under low loads to lower temperatures * Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor * Designed for applications making at least 6 in. of vacuum at idle
( 257 )
$999.00
—
$1,195.99
$899.10
—
$1,016.59
On Sale
The new line of Edelbrock VRS-4150 Race and Performance carburetors are packed with features that will appeal to racers, engine builders and carb tuners, as well as the hot street enthusiast looking to improve performance. The VRS-4150 carburetors are street friendly but race ready—and the one-piece, cast aluminum bodies fit all 4150 and 4500 carb flange manifolds—without requiring an adapter plate. With the new VRS Series carburetors many attributes, they make for easy tuning and great versatility in many applications. They are available in 650, 750, 850, and 950 cfm models, select the model suited to your application needs. Features, specs, and benefits: * A street throttle arm, PTFE-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to the carburetor that are ideal for any user * Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds * The 20 percent larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles * The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration * Users are able to externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop * The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts * Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response * For greater control at high rpm, the high speed/main fuel circuit is split into two bleed circuits—one each for the lower and upper sections * As an additional feature, the power valves are located on both primaries and secondary's that support optimized jetting—the power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires
( 16 )
$897.95
—
$1,047.95
$808.16
—
$943.16
On Sale
Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings
( 2 )
$999.95
$898.95
On Sale
FiTech Easy Street 600 HP self-tuning fuel injection systems deliver high performance—and style! Their gold finish is the perfect way to spice up that monster motor, giving it an old-school look. And, like all FiTech EFI systems, the Easy Street 600 HP is a self-learning, plug-and-play system that features an ECU mounted directly to the throttle body for simplified wiring and an easy installation. Examine the options and select the model best suited for your vehicle. Features of the Easy Street EFI-600 HP system include: * Annular discharge * Windshield mount for control * Four 80 lb. flow matched injectors * Extreme self-learning for a wide range of super-fast dial in connections * Suitable for crate engines and performance engines * Pre-programmed with bolt-n-go technology for out-of-the-box performance with minimal input required * Easy Tach input, reads Tach signal from COIL, HEI, CDI, and many other ignition brands (no timing control) * For non-boosted engines; natural aspirated applications only * Wide band oxygen/ sensor with mounting kit * On-board fuel pump driver with PWM * Hand-held module for performance tuning * One fan control * Compatible with E-85 gasoline
( 35 )
$926.00
$833.40
On Sale
Holley LS Modular Lo-Ram EFI intake manifolds are designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and a 105 mm throttle or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front-feed configuration. The modular design allows the use of front-feed plenum entry, while intake design facilitates custom inlet duct and throttle body placement. Additional features and specs: * Cast aluminum construction with satin silver finish * Modular design allows the use of front-feed plenum entry * Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification * With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits include two sets of brackets; a set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors
( 8 )
$949.95
—
$1,016.95
$853.95
—
$914.95
On Sale
Holley modular Ultra Lo-Ram intake manifold kits feature a design custom-made for LS engines equipped with LS cathedral port cylinder heads, as well as OEM or aftermarket models. They provide an ideal solution for forced-induction (supercharged or turbocharged) engine applications and select throttle bodies—plus the base intake manifold features a lower overall height to fit under a stock or mildly modified hood. The included fuel rail kits come with two sets of brackets: a set for long (usually standard length) fuel injectors and a set for short (such as Pico or LS7) fuel injectors. The Holley LS modular Ultra Lo-Ram EFI intake manifolds best suited for your application also allow the use of front-feed plenum entry. More product features, items, and notes include: * Designed for forced-induction engine applications with peak power at 7,000 to 8,000 rpm (depending on the application) * Intake design facilitates custom inlet duct and throttle body placement * Allows design and fabrication of special throttle body adapters or inlet ducts for custom installations * Different finishes available for the best look to match your ride * Mounting hardware * With forced induction and the short runner length, the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger you use
Not Yet Reviewed
$999.95
—
$1,049.95
$898.95
—
$943.95
On Sale
Want to make the switch from the original Sniper EFI to Sniper 2 and don't want to rewire your system? The new Holley Sniper 2 fuel injection upgrade kits are designed to do exactly that! Included with each Sniper 2 plug-and-play upgrade system is an adapter solution that connects your existing Sniper EFI wiring harness to a Sniper 2 throttle body in minutes. Simply remove your Sniper EFI throttle body from the intake manifold, unplug all connectors, reinstall the Sniper 2 throttle body, and plug the Sniper EFI 2 adapter harness into your existing main harness. Cycle your ignition key, run a fresh wizard on the display of your choice, and enjoy the benefits of Sniper 2 EFI. The #1 EFI conversion system just got better! Introducing Sniper 2 EFI—a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion simpler, more reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will self-tune with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Four total upgrade kits are available: polished and black, with or without external fuel pressure regulator (required for Sniper 2). Upgrade kit features: * Update your Sniper EFI to the new, improved Sniper 2 in less than one hour! * Eliminates the need to rewire your existing installation; one step, plug-and-play upgrade to a Sniper 2 * Improve your ride with the Sniper 2, including wireless connectivity, smooth throttle feel, improved RF resistance, and a hidden wiring harness. * Reuses existing coolant temperature and oxygen sensors * Female -6 AN O-ring fittings for a tight seal * Overall height is only 3.280 in. to fit under most hoods * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI of regulated fuel supply * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Sniper 2 is part of the Sniper EFI complete ecosystem * Available with fuel system kits: that include an adjustable external regulator, fittings, and a 3 ft. section of fuel hose, allowing you to easily mount your regulator in the engine bay Additional NEW features: * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 21 )
$999.95
$898.95
On Sale
Legendary performance offering more value—Quick Fuel Street-Q carburetors deliver the power without the price. How? By retaining what's most important: the function. Street-Qs feature lightweight cast aluminum metering blocks and cast throttle bodies instead of billet components, so they cost less. But, the Q-Series performance remains: 2-circuit metering, down-leg boosters, changeable idle, high-speed air bleeds, and 4-corner idle. Plus, their universal throttle lever design accommodates Ford A/T kickdowns, 700-R4 bracket mounting holes, and the ability to mount brackets for Chrysler vehicles. Quick Fuel Street-Q carburetors fuel your passion and your budget with race-bred performance at no-frills pricing. Order the model designed for fitment on your vehicle application.
( 26 )
$849.95
—
$899.95
$763.95
—
$808.95
On Sale
Holley in-tank retrofit fuel modules are the easiest way to convert your vehicle's factory tank or fuel cell to an in-tank, EFI fuel system—and gain all the benefits of a Holley Hydramat reservoir, as well. This conversion requires only basic tools, no welding or fabrication. The low-profile, aluminum module design includes a billet pump hanger bracket to control vibration; Holley's innovative clamping system and integrated fuel pump allow you to locate the module anywhere in the tank beside your existing sending unit. Once installed, simply hook up your fuel lines and your power source/ground, and you're ready to roll. Holley in-tank retrofit modules are available with fuel pumps for both return and returnless-style systems—and models to support various liters per hour (LPH). Additional details: * Installs in any fuel tank to fit a wide range of applications * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance * Clamping system allows you to rotate the unit 360 degrees for easier clocking of plumbing and wiring * Hydramat fuel reservoir's 3 x 15 in. mounting flange has six clocking pin locations for 360 degree adjustment * Black anodized aluminum construction to resist corrosion * 1/4 in. NPT ports available for numerous plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Optional rollover valve available
( 9 )
$849.95
—
$999.95
$763.95
—
$898.95
On Sale
aFe Track Series Red Kevlar® Carbon Fiber Pro 5R air intake systems are the pinnacle of innovation in open-element intakes. Designed using cutting-edge technology and crafted with premium materials, they undergo rigorous testing to ensure peak performance, and showcase a one-piece housing that shields from elements and heat, while seamlessly fitting into the engine bay. The highlight of the Track Series is their meticulously CAD-designed carbon fiber intake tubes. The tubes in these aFe kits have a unique red Kevlar® twill weave carbon fiber that is visually striking and lightweight, delivering exceptional performance and a captivating induction sound. Along with the massive Pro 5R 36-degree radial flow air filter and the one-piece XLPE polymer housing, the aFe Track Series Red Kevlar® Carbon Fiber Pro 5R air intake systems have the performance and style you'll love. Features and benefits: * Dyno-proven gains * Outflows factory intakes * Unique carbon fiber with red Kevlar® intake tube * XLPE (cross-linked polyethylene) polymer housing minimizes warm engine air for maximum performance * Open element design showcases air filter and delivers an aggressive air intake sound * Built-in air intake scoop to capture cold air directly from the top of radiator support * Washable and reusable black Pro 5R air filter for maximum performance with carbon fiber top * Premium stainless steel clamps and silicone couplings provide a secure seal * Utilizes factory mounting locations for an easy and secure installation
Not Yet Reviewed
$908.25
—
$940.80
$817.43
—
$846.72
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$849.95
—
$1,049.95
$763.95
—
$943.95
On Sale
You don't need a carburetor—you need a FiTech MeanStreet EFI 800 hp system! These full-featured, self-tuning fuel injection setups deliver a whole lot in a small package. MeanStreet offers an onboard ECU and fuel pressure regulator to bring you simple, clean wiring and an easy install. FiTech's wideband oxygen and annular swirl wet-flow technology, proprietary self-tuning technology, and hand-held controller with touch screen gets your car on the road or track faster and with more power than ever. Would you rather have a perfectly tuned carburetor or an EFI system that tunes itself perfectly? The choice is easy--FiTech MeanStreet EFI 800 hp systems. FiTech MeanStreet features include: * Blacked out diecast throttle body * Hand-held controller with 8GB data log capabilities * Annular discharge * Windshield mount for control * 8 high-flow 800 hp injectors * Built-in fuel pressure regulator * Internal MAP sensor * Throttle position sensor * Idle air control sensor * Coolant temp sensor * Wideband oxygen sensor * Oxygen bung kit * -06 AN fuel inlet fittings * One fan control adjustable from controller * AC kick-up control kit * Designed for applications making at least 6 in. of vacuum at idle
( 46 )
$1,171.00
$995.35
On Sale
Holley's low-profile intake manifold for Ford's 7.3L Godzilla engine, when paired with a 20-340/20-340BK oil pan and accessory drive kit, allows for easy installation into vintage vehicles, kit cars, and other space-restricted applications while retaining the factory hood. The design focus for these manifolds was equal cylinder distribution and great street manners. The low-profile intake manifolds offer a much cleaner alternative to the original plastic intake; they provide anywhere from 2 to 3.5 in. of additional clearance, will correct the OE throttle body angle by 55 degrees, and increase the opening to 92mm. With three throttle body options, sturdy cast aluminum construction, a removable lower panel, and long runners to maintain the 7.3L's already substantial torque offering, this is a must-have for any Godzilla project. Throttle Body Options: * 1) 1986-1993 5.0L Mustang style drive-by-cable throttle bodies * 2) 2020-2023 7.3L drive-by-wire throttle body * 3) 2020-2023 GT500 drive-by-wire throttle body (requires P/N 300-903) Compatible Engine Components: * 1) Factory accessories as well as Holley accessory drives (except for 20-380 and 97-409) * 2) Factory fuel rails and Holley 534-265 / 534-266 billet rails Intake manifold features: * Lower profile (2+ inches) than the OE intake manifold * Sturdy cast aluminum construction that will hold up to the elements and forced induction * Perfect complement to Holley's Godzilla accessory drive and oiling system (20-320 / 20-320BK / 20-340 / 20-340BK) for fitment into tight engine bays * Removable lower intake panel that can be removed for additional porting, nitrous, etc. * Incorporates long runners for solid low-end torque * Includes throttle body gasket and all necessary O-rings and adapters to mount to the engine * Compatible with OE or Holley accessory drives and OE or Holley fuel rails * Corrects OE throttle body angle by 55 degrees * Available in natural or black powdercoat finish
Not Yet Reviewed
$927.95
$834.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
