Availability
On Sale
Painless Performance Trail Rocker Jeep JK accessory control systems allow you to control up to eight accessories on your Jeep. They feature a waterproof housing that surrounds the power center with eight fuses and relays. Controlling that unit are five pre-wired switches mounted in your custom dashboard panel for a clean, factory look. The power center provides you with all necessary weatherproof connectors and wiring to control your Jeep accessories--from lights to air lockers.
( 7 )
$574.99
$517.49
On Sale
Compact, vehicle-mounted ARB on-board high performance twin air compressors are designed to do everything! Activate your ARB Air Locker differentials, air up a 35 in. tire in less than a minute. and run air tools. These 100 percent duty cycle (under room temperature conditions) compressors are built to support all of your compressed air needs including the high-volume airflow needs of most air-powered tools. Features of ARB on-board high performance twin air compressors include: * Constructed primarily of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Pressure switch-controlled air manifold system regulates pressure * Highest air flow rate and high-efficiency design minimizes power consumption * Sealed components for moisture and dust resistance * Hard-anodized cylinder bores and PTFE-impregnated carbon fiber piston seals for reduced friction and maximum life * Ducted, sealed, brushless DC cooling fan and anodized motor mount brackets effectively dissipate heat from the motors, heads, and electronics * Anti-vibration, sound-deadening mount * Relocatable, splash-resistant air filter assemblies for cleaner, cooler air supply and versatile water-resistant air intake positioning * High-density and high-flow washable sintered bronze air filter elements * Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids (requires Air Locker manifold kit ARB-171503, sold separately, to mount solenoids) * Dual, heavy-duty Maxi-Fuses for in-line circuit protection and true circuit redundancy in case of a fault * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Motors are internally thermal-protected against extreme temperature damage * Compressor pistons equipped with a heavy-duty, European-made cylindrical roller bearing * Over-pressure safety valve-equipped * Sealed, illuminated, automotive-grade dash switch included * Fully serviceable, replacement parts available * EMF-suppressed for use in proximity to sensitive electronic equipment * CE and C-Tick compliant * Engineered, built, and individually dyno-tested in Australia
( 4 )
$659.95
—
$851.70
$593.96
—
$766.53
On Sale
Nitrous Outlet nitrous oxide plate systems come out of the box ready to deliver superior atomization. They spray up to 200 hp, but are capable of flowing up to 400 hp with additional jetting and a -6 AN main feed line upgrade. You'll get race-proven performance from the unique 6-port discharge design, guaranteeing the perfect mixture of fuel to nitrous. Overview: * Max flow 400 hp * 400+ hp solenoids * Anodized black aluminum plate and bottle (if included) * Wide-open throttle activation switch * Hardware, electric, and jetting included * E85 compatible with different jetting * Jetting included for 50 to 200 hp
( 3 )
$594.99
—
$978.99
$505.74
—
$832.14
On Sale
Body Armor 4x4 offers fender flares for a variety of Jeep Wrangler and Gladiator applications. Fabricated from 3/16 in. steel plate, the flares feature a two-stage light texture powdercoat finish. They provide up to 7 in. of coverage (depending on model) and a high-clearance flat design. Some sets include DOT-approved switch back driving light and hi-lift mounting hardware. Most fender flares accommodate Rotopax containers, Quickfist mounts, and other accessories. Order a pair designed for the front, for the rear, or both to equip your entire vehicle.
Not Yet Reviewed
$600.00
$510.00
On Sale
Nitrous Outlet X-Series nitrous oxide systems are the perfect solution for racers on a budget. They're made of the same high-quality parts as other Nitrous Outlet systems, and are available in universal and application-specific kits. Choose your nitrous delivery style, wet or dry, desired horsepower increase, jet sizes, and other options. X-Series nitrous oxide systems include everything you'll need for a clean installation and enhanced performance at the track!
( 26 )
$771.99
—
$887.99
$656.19
—
$754.79
On Sale
AEM Electronics water/methanol injection kits allow you to increase boost pressure and advance timing without having to run higher-octane fuel resulting in significant horsepower gains.
( 35 )
$565.95
—
$674.95
$508.95
—
$606.95
On Sale
MSD offers these Power Grid 7 ignition boxes as part of the Power Grid 7 ignition system. These ignition boxes pack higher output than other current programmable units. When used with the Power Grid 7 system controller, these USB-compatible boxes offer advanced programming for ultimate control over your rpm and timing. They provide five retard stages for nitrous and four steps of rpm limits for burnouts, spool, launch, and overrev. MSD Power Grid 7 ignition boxes' output switch can be set on rpm, pressure, or time. Power Grid 7 ignition boxes have shift light settings for each gear, and the ignition data acquisition accepts multiple runs.
( 11 )
$718.95
$646.95
On Sale
MSD Power Grid system controllers are the brains behind the entire Power Grid system, and they can be used with any MSD ignition or Pro Mag to provide advanced ignition tuning capabilities. While they're compatible with all MSD ignition boxes, they've been specially designed to mount on top of the Power Grid 7 ignition box. Features include: * USB connection for easy programming * Timing based on engine rpm and gear value * Advanced individual cylinder timing based on gear or time * Five retard stages for nitrous * Four steps of rpm limits for burnout, spool, launch, and overrev * Output switch set on rpm, pressure, or time * Shift light settings for each gear * Ignition data acquisition accepts multiple runs * View software * Wiring harness * Micro SD-card
( 10 )
$649.95
$583.95
On Sale
MSD has combined race-winning experience with leading-edge technology to offer these incredible Digital-6 Plus ignitions. The 15 MHz micro-controller can analyze up to 15,000,000 critical instructions per second! That's over three times faster than comparable ignitions. Every spark is packed with 135 millijoules of spark energy and 535 V of power. Built-in features on the MSD Digital-6 Plus ignition include two rotary switch adjustable rev limiters, a single-stage timing retard, a start-up timing retard, an LED fault display, EMI protection, and much more! You get complete combustion for greater power, quicker throttle response, smoother idling, and quicker starts. You always get more power with less current draw.
( 46 )
$649.95
$583.95
On Sale
These B&M Stealth Pro Ratchet shifters' contemporary style and myriad features speak volumes to their functionality. They are the leading choice for 3 and 4-speed transmissions. Easy to operate and install, they come supplied with a 5 ft. super-duty race cable. The B&M Stealth Pro Ratchet shifters also feature: * Lightweight, stealthy black anodized aluminum cover and grip * Single hand-operated reverse lockout feature meets NHRA and IHRA requirements * Stick always returns to center position after shift * Easiest unit to double shift with an air, CO2, or electric shift mechanism * Short throw ratchet action reduces shift time * Supplied with a lightweight brushed aluminum cover * Precision ratchet action works with either standard or reverse pattern valve bodies * Includes neutral safety switch, backup light switch, gear position indicator, and both forward and reverse pattern indicator decals
( 40 )
$599.95
$538.95
On Sale
Aeromotive Phantom 340 Stealth fuel systems include all the main components (including the highly sought, baffled Phantom 340 fuel pump) required to create a proper carbureted return-style or EFI fuel system for vehicles with OEM-style fuel tanks. They add a whisper-quiet internal pump to your stock tank that can deliver enough liquid energy to feed your high-performance street rod or muscle car, even in tanks as shallow as six inches! These systems provide a universal high-flow pre-pump filter and modular design that allows fitment to almost any fuel tank. Make the stealthy switch to Aeromotive Phantom 340 Stealth fuel systems and take advantage of modern technology in your classic ride! More product features, items, and specifications include: * Supports up to 700 horsepower on forced induction EFI setups and up to 850 horsepower on naturally aspirated EFI setups * Supports up to 860 horsepower on forced induction carbureted setups and up to 1,000 horsepower on naturally aspirated carbureted setups * Requires AN-06 fuel hose and hose ends for proper installation of fuel return/supply lines (all sold separately) * Black anodized hanger assembly and fuel-resistant baffle/basket (with foam and bladder) * Phantom 340 fuel pump (18688) * Fuel pump strainer * Retainer C-ring with studs * Gasket (1/2 in. thick) * Installation ring * Drill bit (No.2; 0.221 in. diameter) * Ring terminals and caps (2 each) * Hose clamp (1 each) and pump clamps (2 each) * Nylon-locking stainless steel No.10-24 nuts (10 each) * Locking No.10 nylon washers (10 each) * Machine screws - No.10-24 x 2 1/2 in. (2 each) * Foam spacer (1.0 in. wide x 1/2 in. thick) * Must be used with a return style fuel system * Designed for in-tank use only * Recommended tools include a 3 1/4 in. hole saw drill for metal, flathead screwdriver, 3/8 in. socket and ratchet, tape measure, and bread knife or hacksaw blade
( 43 )
$714.55
$643.10
On Sale
Hooker exhaust cutouts improve a good, old idea with new materials. These cut-outs will provide years of worry-free use with a mixture of stainless steel and aluminum. The materials will keep the elements out and the sound ... well, that's up to you. A simple flip of the switch or push of the button puts you in control of sound and performance. Hooker offers single and dual cut-out kits. Hooker exhaust cutouts feature: * TIG-welded T-304 stainless steel tubing for a clean and weather-resistant finish * 6061 aircraft aluminum motor and valve bracket * Instant performance gains when opened * Dual kits include a "Y" cable for simple wiring and simultaneous valve operation * Single kits have a toggle switch to operate the valves, while dual kits have a remote for valve operation * Stainless tip can be positioned for any direction of exhaust * Components available separately * Simple 12 V cigarette lighter plug-in for main power supply
( 33 )
$619.95
—
$623.95
$556.95
—
$560.95
On Sale
Patterned after Hurst's award-winning Quarter Stick shifter, their Pistol-Grip shifters offer a firm, natural grip so you can bang through the gears quickly and comfortably. They feature controlled detent activation, one-hand operated spring-loaded reverse lockout, and a neutral safety switch. CNC-machined from billet aluminum, the Hurst Pistol-Grip handles come with a snap-action switch for roll control, nitrous, or trans-brake activation.
( 52 )
$599.95
—
$722.95
$538.95
—
$649.95
On Sale
Holley Dominator billet fuel pumps feature a patent-pending twin-pump design. It allows you to use one pump for cruising and both pumps when you activate the nitrous switch or start building boost. By staging the second pump, you eliminate the unnecessary recirculation and heating of extra fuel, which can lead to poor performance and hot fuel issues. They can also be wired for full-time duty to get the maximum performance and are proven with an 18 V compatibility at pressures of up to 80 psi. At only 5.1 lbs., they weigh half a pound less than other 1,000 hp pumps, and yet they have twice the features. Features include: * Billet aluminum construction with anodized finish * -10 AN O-ring inlet/outlet for high flow and superior sealing * Excellent for use with carburetor or EFI applications * Compact for easy installation on frame rails or other tight spaces * Proven durability beyond 3,000 hours in gasoline or diesel fuels * Fully sealed, can be submersed if necessary
( 13 )
$573.95
—
$699.95
$515.95
—
$628.95
On Sale
For racers that need serious spark output, the MSD Ultra 7AL ignition boxes are the right choice. Offering industry-leading spark energy output in a compact and efficient package, the Ultra 7AL includes four step retards, three rev limits and two rpm-activated switch outputs. The Ultra 7AL also features two different power output settings that can be used for on-the-fly changes which are perfect for drag-and-drive applications. All features are adjusted using plug-in modules including the 3-step rev control and multi-step retard. The rev control gives you the ability to set one rev limit for the burnout, another for the staging rpm limit and a third for use top end engine protection in the event of driveline failure. For nitrous fans, there are four separate stages that can be activated independently yet add up together. Plus, there are two rpm activated switch outputs that can be used for air shifters, shift lights or other devices that require a perfectly timed ground trigger! For increased output and proven multi-spark power, use MSD Ultra 7AL ignition boxes. Ultra 7AL multiple spark ignition control features and benefits: * High-output continuously delivers high energy for maximum performance even under extreme race or street conditions * Lighter, and over 50 percent smaller than the 7AL-3 model * Two different power output settings for on-the-fly changes for drag-or-drive situations * Twice the spark output of the 7AL-3, (330mJ vs 160mJ) * Adjustments made using plug-in modules for the 3-step rev control and multi-step retard * Rev control can set one rev limit for burnout, another for the staging rpm limit, and a third for high rpm engine protection * Quickens throttle response * Adjustable start retard can control the amount of retard pulled out during engine cranking * Adjustable switch for start retard settings eliminates the need for additional external wiring to the starter solenoid * Two rpm activated switch outputs (compared to the 7AL's single RAS output) * Two multi-colored status LEDs Emissions Note: This part is only legal for sale and use on uncontrolled (non-emissions controlled) vehicles or on vehicles used solely for the purposes of closed competition racing.
Not Yet Reviewed
$799.95
$718.95
On Sale
Doug's Headers electric exhaust cutout kits allow you to convert to a wide-open, unobstructed exhaust system with the flip of a dash-mounted switch. These rugged electric exhaust cutouts are built to last; they feature full stainless steel construction with a heavy-duty Dayton gear reduction rack and pinion electric drive mechanism. Best of all, these cutouts use a self-cleaning, knife-edge seat for a leakproof seal every time, whether open or closed. Doug's Headers electric exhaust cutouts include a pre-wired harness, a toggle switch, and fuses for an easy installation.
( 104 )
$634.45
—
$670.50
$571.00
—
$603.45
On Sale
Add GM 6L80/90E transmission control to any existing vehicle utilizing a Terminator X Max ECU. A departure from traditional Holley EFI transmission control, the Terminator X Max ECU allows the ability to use 2007+ GM 6L80E and 6L90E transmissions by communicating via CAN with the internal TCM (Transmission Control Module). The supplied Holley EFI OBDII transmission tuning hand-held is used to adjust shift points, tire size and gear ratio. Terminator X V3 software provides the ability to dial in torque management to optimize the desired shifting characteristics when using a 6L80/90E transmission. The software also enables you to control the secondary shift mode within the transmission TCM and allows use of tap Up/Down shifting. Within Terminator X V3 PC Software: --- Virtual Torque Management Tables --- Virtual TPS Tables to dial in shift characteristics regardless of engine --- DBW and Timing torque reduction tables to create smooth shifts Within the Holley EFI OBDII Transmission Tuning Hand-held: --- Ability to read and clear TCM fault codes --- Ability to raise and lower shift points by MPH or RPM --- Support for Tap Up/Tap Down & Transmission's Secondary Shift Mode If you currently have a Terminator X ECU, upgrading to a Terminator X Max ECU can be easily done by plugging your main harness into the Max ECU and re uploading your existing calibration. Holley Terminator X MAX GM 6L80/90 transmission kit features: * Included TCM hand-held tuner with integrated wizard is required for setup in conjunction with the Terminator X 3.5 in. hand-held. Terminator X V3 software unlocks optional tuning parameters. * Plug-and-play with any engine controlled by a Terminator X Max ECU * Supports: Shift Mode - Tap Up / Tap Down, and torque management * Four loose wires: --- Power (Red): Supplies power to the transmission solenoids. This should be connected directly to the battery, or a constant battery source capable of supplying 5 amps --- Ground (Black): Connect to a good chassis/engine ground source --- Brake Switch (Light Blue/White): Wired to the brake light switch. This must be installed to a +12 V source (as most brake light switches are) --- Park/Neutral Safety (Yellow): Circuit for starter solenoid. When the transmission is in Park or Neutral, this yellow wire will be grounded (-). When the transmission is in gear this circuit will be open.
Not Yet Reviewed
$573.95
$515.95
On Sale
The next generation Edge Evolution CTS3 programmers will continue to include all of the great features, benefits, and extended coverage from the CTS2 product line, while adding a sleek, new exterior and cutting-edge screen. The Evolution CTS3s reprogram your vehicle's stock computer through the OBDII port, saves the factory files to easily return to stock, and then uploads the Edge calibrations. They come with multiple power levels custom tuned by a whole team of engineers, and can be installed in minutes without ever popping the hood. Edge Evolution CTS3 programmers greatly increase horsepower and torque, and not only re-tunes your vehicle, they stay mounted in the cab of the vehicle offering real-time, monitoring of vital engine and vehicle data for a complete gauge package. Edge Evolution CTS3 programmers feature: * Most comprehensive, state-of-the-art, multi-gauge/tuner touch screen display on the market * 3rd generation design is faster and more capable than ever * Power levels designed for daily driving, towing, performance, and extreme * Simple installation just plug into OBDII port--no wiring required * Monitor key vehicle parameters like transmission temperature, boost, rpm, and dozens more * Full color, 5 in. capacitive touch screen with auto-dimming * Offers crystal clear data at your fingertips * Highly customizable gauges and backgrounds * Boot-up directly to gauge screen upon key cycle * Swipe capability allows easy switching between screens as needed for towing, performance, economy, etc. * Built-in performance meter measures 0 to 60, mile times, and more * Advanced integrated data logger with export capability * Ability to add vehicle licenses to tune multiple vehicles with one product * Clear and read DTC codes * Wi-Fi updateable
( 13 )
$723.95
—
$899.95
$650.95
—
$808.95
On Sale
Brothers Trucks one-piece window kits for your classic Chevy/GMC truck eliminate the vent window, giving your truck a smooth appearance and great operation. The special cut glass provides complete sealing around the window, and is painstakingly designed for easy installation and use. Most kits will do both doors and are available with clear or tinted glass. Brothers offers power conversion kits complete with switches, as well as kits for manual and existing power window applications. Brothers Trucks one-piece window kits include glass, felt channels, glass scraper set, hardware, and any other parts that may be needed. Choose the kit designed for your truck.
( 8 )
$573.95
$515.95
On Sale
Shiftworks SW280 and SW230 Series automatic transmission floor mount shifters are adaptable to many different applications. They come with the mounting hardware, rod linkage, neutral safety/backup light switch, cables (where applicable) and the handle (in your choice of a T-handle style or round smoothie shift knob). For cable-operated setups, cable is also sold separately in various lengths to suit your vehicle needs.
( 21 )
$562.99
—
$606.99
$506.69
—
$546.29
On Sale
Switch to the Darkside! Hooker Competition Darkside ceramic coated headers feature an exclusive proprietary black ceramic coating that offers a more refined texture and better appearance. They are manufactured from durable 16-gauge steel and have 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. These headers provide improved thermal resistance up to 1,700 degrees F, limiting heat migration through the header and reducing underhood temperatures. Unless otherwise noted, they are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 10 )
$799.95
—
$999.95
$549.95
—
$718.95
On Sale
Aeromotive Phantom 200 Stealth fuel systems include all the main components (including the highly sought, baffled Phantom 200 fuel pump) required to create a proper carbureted return-style or EFI fuel system for vehicles with OEM-style fuel tanks. They add a whisper-quiet internal pump to your stock tank that can deliver enough liquid energy to feed your high-performance street rod or muscle car, even in tanks as shallow as six inches! These systems provide a universal high-flow pre-pump filter and modular design that allows fitment to almost any fuel tank. Make the stealthy switch to Aeromotive Phantom 200 Stealth fuel systems and take advantage of modern technology in your classic ride! More product features, items, and specifications include: * Supports up to 450 horsepower on forced induction EFI setups and up to 600 horsepower on naturally aspirated EFI setups * Supports up to 600 horsepower on forced induction carbureted setups and up to 750 horsepower on naturally aspirated carbureted setups * Requires AN-06 fuel hose and hose ends for proper installation of fuel return/supply lines (all sold separately) * Black anodized hanger assembly and fuel-resistant baffle/basket (with foam and bladder) * Phantom 200 fuel pump (18689) * Fuel pump strainer * Retainer C-ring with studs * Gasket (1/2 in. thick) * Installation ring * Drill bit (No.2; 0.221 in. diameter) * Ring terminals and caps (2 each) * Hose clamp (1 each) and pump clamps (2 each) * Nylon-locking stainless steel No.10-24 nuts (10 each) * Locking No.10 nylon washers (10 each) * Machine screws - No.10-24 x 2 1/2 in. (2 each) * Foam spacer (1.0 in. wide x 1/2 in. thick) * Must be used with a return style fuel system * Designed for in-tank use only * Recommended tools include a 3 1/4 in. hole saw drill for metal, flathead screwdriver, 3/8 in. socket and ratchet, tape measure, and bread knife or hacksaw blade
( 27 )
$647.70
$582.93
On Sale
Aeromotive VaporWorx ReturnX return-type PWM controllers have everything needed to provide a standalone fuel pump speed control system. Available for single or dual pump, naturally aspirated or supercharged applications, no switches, relays, or Hobb's switches are needed when using these ReturnX systems. Controllers have primary and secondary output with the primary providing sufficient pump speed to maintain fuel pressure during idle/cruise while the secondary pump follows at a lower duty cycle. This leader/follower arrangement delivers a smooth ramp-up in pump speed until both pumps are at full output. For carbureted and EFI applications, simply attach the supplied standalone MAP sensor hose to a manifold vacuum source (naturally aspirated) or past the supercharger/turbocharger and make at-idle controller adjustments--the VaporWorx controller will do the rest. Select the single or dual naturally aspirated or supercharged version needed for your setup. Key features: * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent * Standalone MAP-based fuel pump speed control * Carburetor and EFI capability Benefits: * Everything needed electrically to drive the fuel pump(s) * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 40 to 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating range -- Can be used with voltage boosters -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition
( 1 )
$630.20
$567.18
On Sale
Aeromotive VaporWorx BoostWorx returnless PWM controllers for dual fuel pump applications have everything needed to provide a standalone, OE-type returnless fuel system. They provide a 1:1 manifold referenced fuel pressure using the VaporWorx supplied standalone MAP sensor and mounting bracket, acting just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. BoostWorx PWM dual-pump controllers feature: * Everything needed electrically to drive the fuel pump module--no relays or Hobb's switches are required * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection with automatic reset * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor * Second pump turn-on set to 4 psi * The PWM controller supports Aeromotive's line of 340 lph in-tank pump
Not Yet Reviewed
$683.25
$614.92
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
