Availability
Showing In Stock Items. Show All 255 Items.
On Sale
RaceQuip Composite FIA racing seats are Pro Racing designed seats with thigh and hip support, integral shoulder and rib bolsters, and accommodates all head and neck restraints. Features include: * One-piece lightweight FRP composite shell * Five seat belt guides handle 4-point, 5-point, or 6-point belts * Energy absorbing foam for comfort and safety * Mesh fabric cover for breathability * Shiny gelcoat finish on exposed areas * Four built-in 6mm side mount fasteners
( 8 )
$599.95
$538.95
On Sale
We understand that it doesn't matter whether you're cruising or racing--a comfortable set of seats is a must-have for any vehicle. These Summit Racing™ sport seat combos include two Summit Racing™ sport seats, two Scat seat mounting brackets, and two Summit Racing™ bracket adapters. With adjustable sliders, lumbar and shoulder supports, cutouts for safety harnesses, and recline and tilt forward mechanisms, these Summit Racing™ sport seat combos offer perfect adjustability and comfort for any road or track vehicle.
( 26 )
$693.94
—
$736.94
$593.94
—
$636.94
On Sale
RaceQuip Composite Full Containment FIA racing seats are Pro Racing designed seats with right and left head supports, extra-tall thigh and hip support, integral deep shoulder and rib bolsters, and they accommodate all head and neck restraints. Features include: * One-piece lightweight FRP composite shell * Five seat belt guides handle 4-point, 5-point, or 6-point belts * Energy absorbing foam for comfort and safety * Mesh fabric cover for breathability * Shiny gelcoat finish on exposed areas * Four built-in 6mm side mount fasteners
( 1 )
$849.95
$763.95
On Sale
Summit Racing™ induction kit Pro Packs start with the Edelbrock EPS Performer intake manifold, which builds horsepower and torque from idle to 5,500 rpm. Summit Racing™ induction kits also include an Edelbrock 600 cfm Performer carburetor and a 14 in. chrome steel Summit Racing™ air cleaner, plus zinc plated Summit Racing™ carb studs, a Summit Racing™ stainless steel intake bolt kit, and a Fel-Pro Printoseal intake manifold gasket set. These kits are compatible with both the 260 hp and 290 hp versions of this engine and are designed for smooth street performance.
( 23 )
$774.86
$703.98
On Sale
Quick Fuel Brawler Race Series carburetors are machined and assembled by skilled craftsman, and they work hard, just as their name implies--just raw, bare-knuckled performance that you can rely on. Brawler performance development started with a high-flowing diecast aluminum main body and added purple billet aluminum metering blocks with the latest technology in air/fuel calibrations for today's race engine demands. The carburetors also include purple billet aluminum throttle base plates for superior durability and throttle shaft stability. Quick Fuel Brawler Race Series carburetors offer all of the options and tunability that you would find from more expensive carburetors in the market, including changeable idle and high-speed air bleeds, as well as 4-corner idle adjustment on all mechanical secondary models.
( 112 )
$799.95
—
$849.95
$718.95
—
$763.95
On Sale
Designed for stock and mildly hopped-up street vehicles, our Summit Racing™ torque converters give you the extra stall speed that you need for quicker launches. They're available for a variety of transmission makes and models. Summit Racing™ converters are computer-balanced and feature: * Submerged arc welds * New turbine hub * Custom stator * New pilot * New impeller hub
( 362 )
$564.99
$509.99
On Sale
Shutting down your vehicle's fuel-saving cylinder deactivation system has its advantages. If your AFM lifters are failing or if you're doing performance upgrades, Summit Racing™ offers cylinder deactivation delete combo Pro Packs that will allow your vehicle to run on all cylinders and have full power at all times. Select the kit designed for your vehicle. Cylinder deactivation delete Pro Packs include: * ICT Billet LT lifter valley covers * Summit™ Performance LS7 hydraulic lifters * Summit™ lifter guides * BTR Gen V LT VVT cam timing bolts * ACDelco crankshaft front seal * ACDelco water pump gaskets * Mahle head gasket set * Fel-Pro head bolts * ACDelco harmonic balancer bolts
Not Yet Reviewed
$777.89
$774.89
On Sale
Summit Racing™ Pro LS torque converters are designed for stock and modified LS-powered street vehicles that make up to 600 rwhp. They will furnish the extra stall speed that you need for quicker launches—and they pair well with our Summit™ Pro LS series camshafts. These computer-balanced torque converters feature: woven carbon lockup clutch lining; heavy-duty Torrington bearings; hand TIG welding; a new pilot, impeller hub, and turbine hub; and a custom stator. The torque converters are available in a variety of options; order the model recommended for your application.
( 35 )
$564.99
$509.99
On Sale
Pypes Race Pro dual exhaust systems are designed to boost your car's performance to the next level--you'll get more power, better mileage, and a rich, throaty tone that cannot be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, stainless steel tubing and precision-matched Pypes Race Pro mufflers. When it comes to flow, you can't get anything better than Race Pro mufflers. Their throaty sound is surprisingly tame, considering the absence of any obstructions when you look in them. At idle and low-rpm cruising, you will not draw much attention, but upon acceleration, bystanders look out! Race Pros' aggressive sound is the result of applying a layer of stainless mesh around a unique internal perforated tube, accompanied by a healthy stuffing of basalt insulation before the units are sealed. Additional features of Pypes Race Pro dual exhaust systems: * 16-gauge stainless steel pipes * Straight-through design mufflers * Hangers, clamps, and instructions included * Slip-fit connections for a fast and trouble-free installation * Some cutting may be required
( 171 )
$609.79
—
$878.79
$569.79
—
$838.79
On Sale
XS Power 16 V Lithium racing batteries are for the drivers who want a battery to perform at its best. Their sealed design offers safe, maintenance-free operation and are resistant to cold and excess vibration. When weight savings is crucial, that's when you look to XS Power's 16 V Lithium racing batteries, because they weigh a fraction of typical lead-acid or AGM batteries. When you want the ultimate battery, XS Power Lithium is the answer.
( 4 )
$699.99
$643.99
On Sale
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$766.85
—
$873.86
$698.27
—
$794.38
On Sale
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$599.95
—
$849.95
$538.95
—
$763.95
On Sale
The new line of Edelbrock VRS-4150 Race and Performance carburetors are packed with features that will appeal to racers, engine builders and carb tuners, as well as the hot street enthusiast looking to improve performance. The VRS-4150 carburetors are street friendly but race ready—and the one-piece, cast aluminum bodies fit all 4150 and 4500 carb flange manifolds—without requiring an adapter plate. With the new VRS Series carburetors many attributes, they make for easy tuning and great versatility in many applications. They are available in 650, 750, 850, and 950 cfm models, select the model suited to your application needs. Features, specs, and benefits: * A street throttle arm, PTFE-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to the carburetor that are ideal for any user * Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds * The 20 percent larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles * The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration * Users are able to externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop * The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts * Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response * For greater control at high rpm, the high speed/main fuel circuit is split into two bleed circuits—one each for the lower and upper sections * As an additional feature, the power valves are located on both primaries and secondary's that support optimized jetting—the power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires
( 16 )
$827.95
$745.16
On Sale
Rocket Racing Attack Titanium machined wheels are an example of Rocket's relentless commitment to performance and innovation. They feature dual-direction, flow-form, semi-forged technology that offers near infinite flexibility. Because the cast center can be moved within a wide range of offsets inside the spun forged outer; Rocket's expertise provides options that were previously available only with expensive multi-piece wheels. Rocket Racing Attack wheels also feature: * Dual-direction, flow-form, semi-forged technology provides weight and strength characteristics similar to forged wheels * One-piece design eliminates leaky bolts, maintenance, and adjustments required with 3-piece wheel designs * Generous caliper clearance for modern performance brakes * Incredible styling and performance for the street * Titanium machined finish features a precision machined face and outer with titanium accents * Premium low-maintenance clearcoat * Available in several sizes, bolt patterns, and backspacing to fit your application Note: All Rocket Racing wheels undergo rigorous SAE J2530 automotive aftermarket testing for street performance. Rocket Racing Wheels are not intended for off-road or track use.
( 17 )
$579.95
—
$825.95
$519.95
—
$718.95
On Sale
Summit Racing™ carburetor and air cleaner Pro Packs packaged your favorite carburetor with the most popular air cleaners available for them, plus a set of Summit Racing™ zinc plated carb studs. One part number saves you time and money!
( 2 )
$585.88
—
$805.93
$533.89
—
$729.93
On Sale
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$548.62
—
$861.84
$516.28
—
$778.24
On Sale
These Summit Racing™ manual transmission shifter and installation kit Pro Packs have been put together to provide your vehicle with quick, precise shifts every time. They feature a Hurst Competition Plus shifter, a shifter ball, and an installation kit for your specific transmission model. If you're ready to upgrade your shifter, then pick up one of these Summit Racing™ manual transmission shifter and installation kit Pro Packs and make smooth, accurate gear changes, shift after shift.
( 33 )
$932.90
$689.60
On Sale
Summit Racing™ intake manifold and installation Pro Packs are now all in one part number. With Summit Racing™ intake manifold and installation Pro Packs, you can get your satin-finished, square-bore intake, plus all of the installation items that you need to finish the job, and save time and money! These Pro Packs also include Loctite black RTV sealant.
( 42 )
$568.89
$515.20
On Sale
Simpson Supercoil one-piece racing suits are the ultimate in comfort, style, and performance. Designed with lightweight titanium Nomex fabric, embroidered logos, and multiple trim colors, the suits feature X-Tech stretch side, back, thigh, and knee panels for ventilation and flexibility. They include contoured pockets and are SFI 3.2A/5 certified. Select the size and color scheme you prefer.
Not Yet Reviewed
$1,499.95
$824.95
On Sale
"Bolt and go" is hard to believe, and yet the tech-savvy people and operations at Scorpion offer the only direct bolt-on--the LS Race Series rocker arms. You won't have to change your valve covers. These amazing aluminum rocker arms use factory bolts and are torqued to factory specifications. They possess all of the great quality features offered on all Scorpion rocker arms, like solid steel pedestals and black oxide coated steel parts, and they are 100 percent CNC-machined. Scorpion LS Race Series rocker arms are the quietest on the market and can be installed by the garage guy with know-how. Bolt on a set of Scorpions and sting your competition with LS Race Series rocker arms.
( 11 )
$589.88
$513.20
On Sale
Developed with performance in mind, Holley EFI LS single plane split-design race intake manifolds feature a race bred, 2-piece split design that was previously found only on the most expensive race intakes. These manifolds will fit GM LS Gen III engines with cathedral port heads for high performance/racing engine applications with 5.3 to 6.2 liter displacement and maximum engine speeds of 6,000 to 7,000 rpm, depending on the engine combination. The single-plane design provides optimal performance across the rpm spectrum, while the split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, makes custom porting and matching a snap. Shoulder bolt locators and an O-ring seal makes reassembly simple and precise.
( 4 )
$699.95
—
$821.95
$628.95
—
$738.95
On Sale
Summit Racing™ carburetor and fuel pump Pro Packs have taken the most popular combinations of square bore carburetors, fuel pumps, and fuel pressure regulators (plus relay kits for most of the electric fuel pump kits) and put them together with one part number to save you time and money.
( 1 )
$635.93
—
$803.89
$588.94
—
$689.89
On Sale
Simpson's Vixen II Racing Suit redesign offers SFI 3.2/5 protection in a comfortable and stylish suit designed to accentuate curves and move with the racer. These one-piece racing suits have the finest fabric interior and shiny twill outer layer and provide maximum protection from burn situations, while at the same time delivering style and attention to detail. The women's racing suits' design curves smoothly along the body shape with strategic darts, providing less bulk and a sleek silhouette. The front pockets lay flat and special attention has been given to the waist, bust, and hip area, offering a proportional fit that is stylish, desirable, and wearable to female racers. Suits are offered in a range of women's sizes. Product features and details: * SFI 3.2A/5 certified * Two-layer female racing suit * Satin twill outer with soft knit ribbed interior * Available in different color options and women's sizes
Not Yet Reviewed
$925.95
—
$999.95
$549.95
On Sale
Helix racing suits belong to the Simpson DNA strand of high performance racing products. These one-piece suits are designed with athletic performance-enhancing features engineered to reduce weight and driver restrictions. They're available in multiple color options in adult and youth sizes. Features include: * Two layers * DuPont Nomex fabric * SFI 3.2A/5 certified * 270 degree arm and back gussets * Knee and inner thigh stretch panels * Lower back stress relief panel * Upper back ventilation port * No bulk, weight-saving patch pockets and embroidered trim and logo
Not Yet Reviewed
$695.95
$625.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
