Availability
On Sale
Scott Drake motor mounts are available in direct replacement and high performance styles. They are made from top-quality materials to strict specifications for proper fit and function.
( 33 )
$569.95
$511.95
On Sale
After a few hard launches, OE Corvette transmission mounts are prone to fail; often reducing traction and creating powertrain shake (sometimes mistaken as wheel hop). aFe PFADT Series transmission mounts upgrade soft factory transmission mounts to a complete differential brace improving vehicle launches and overall feel. These transmission brace sets are designed to replace OE mounts and bolt to the differential to keep your powertrain in place, reducing the loads on your half-shafts and other driveline components. PFADT Series mounts are CNC-machined, 6061 anodized T-6 aluminum mated to nickel plated chassis mounts with replaceable polyurethane bushings. They are a direct-fit and include Grade 10.9 hardware. Replace your OE mounts with aFe PFADT Series transmission mounts and see how much performance you've been missing!
( 1 )
$635.00
—
$657.00
$571.50
—
$591.30
On Sale
We matched up high performance clutch parts to form these Summit Racing™ clutch, flywheel, and mounting hardware Pro Packs. They're available for hundreds of Ford, GM, and Mopar applications from the 1950s and up. Convenient and economical, Summit Racing™ Pro Packs save you the legwork with the correct parts to complement each other. Pro Packs include: * RAM HDX series clutch kit * Billet steel flywheel * Hydraulic throwout bearing * Pressure plate bolts and flywheel bolts
( 4 )
$782.38
$751.48
On Sale
FUELAB electronic fuel pump controllers are enclosed in billet aluminum cases and are specifically designed to operate DC brushless fuel pumps. They're available in various speed control options and can operate up to 20 amps and 16 volts.
Not Yet Reviewed
$600.00
$540.00
On Sale
Holley SBF Hi-Ram EFI intake manifolds with side-mount tops are available for the 8.2 in. or 9.5 in. SBF Ford applications, and come with either a 95mm or 105mm Ford 5.0L throttle body flange side-mount top. The runner length and tapered cross-section design will perform well for a wide range of engine configurations. Holley's engineering team redesigned the water crossover passage to allow room for distributor phasing. The SBF Hi-Ram EFI intake manifolds have aggressive, bold, race-bred styling that's perfect for drag race, muscle car, off-road, pulling trucks, street rod applications, and more! Additional features and specs include: * Cast aluminum construction with satin silver finish * Designed for side-mounted throttle bodies (Ford 5.0L throttle body fitment) * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system; they come standard with EFI Hi-Ram kits * Plenum top gasket type: 3/32 in. round O-ring cord * Allows room for designing boosted applications * A low-profile distributor will be needed when using this manifold
Not Yet Reviewed
$1,249.95
$687.95
On Sale
Holley EFI intake manifolds feature port-matched upper and lower runners for reduced restrictions. Plus, the EGR passages have been relocated to the outside of the manifold to allow for the use of larger intake ports. The result is greater air capacity, which makes these manifolds the perfect choice for supercharged engines. They're available in a variety of styles and options; select the model designed for your vehicle and/or engine application.
( 6 )
$599.95
—
$682.95
$538.95
—
$613.95
On Sale
Holley Dominator billet fuel pumps feature a patent-pending twin-pump design. It allows you to use one pump for cruising and both pumps when you activate the nitrous switch or start building boost. By staging the second pump, you eliminate the unnecessary recirculation and heating of extra fuel, which can lead to poor performance and hot fuel issues. They can also be wired for full-time duty to get the maximum performance and are proven with an 18 V compatibility at pressures of up to 80 psi. At only 5.1 lbs., they weigh half a pound less than other 1,000 hp pumps, and yet they have twice the features. Features include: * Billet aluminum construction with anodized finish * -10 AN O-ring inlet/outlet for high flow and superior sealing * Excellent for use with carburetor or EFI applications * Compact for easy installation on frame rails or other tight spaces * Proven durability beyond 3,000 hours in gasoline or diesel fuels * Fully sealed, can be submersed if necessary
( 13 )
$626.95
$563.95
On Sale
Hooker Super Competition sidemount headers and mufflers deliver the most aggressive style and performance for your early Corvette, Camaro, Nova, or Firebird. Sidemount headers are built from lightweight 18-gauge tubing. Sidetubes slip directly into the collector for a leak-free seal. They are available in your choice of three finishes: Show quality chrome, high heat-resistant black paint, and metallic ceramic coating. The replaceable mufflers are available separately in two different styles: glasspack and reverse flow. The glasspack style provides the highest performance with minimal backpressure and sound control, while the reverse flow is designed for maximum sound control. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 29 )
$999.95
—
$1,237.95
$649.95
—
$680.95
On Sale
Brothers Trucks Fulton Style windshield visors are the highly coveted front adjustable exterior visors for classic pickup truck cabs. These completely adjustable reproductions feature heavy gauge stamped steel construction, plus, a Black EDP (Electro Deposition Primer) coated finish for corrosion protection and easy paint preparation. They come completely ready to assemble and install. Be the envy of all the other classic GM truck and SUV owners when you order Brothers Trucks Fulton Style windshield visors.
Not Yet Reviewed
$573.95
$515.95
On Sale
All-Pro Off-Road Baja Series front bumpers have race-inspired "Pre-Runner" styling, and are designed to protect the front-end on select Toyota Tacoma models, as well as improve off-road capability. They also allow for the mounting of up to a 9,500 lb. capacity recovery winch with remote solenoid (use of integrated solenoid winch requires grille trimming). The winch mounting surface on the Baja bumper features the common 10 in. x 4.5 in. bolt pattern used by Warn and other winch manufacturers. Tabs are included for mounting a winch fairlead, and there is also a convenient winch hook loop, on which to place the winch hook and tension the line for storage. Key features and options may include: * Heavy-duty steel tubing with CNC laser-cut and brake-formed 3/16 in. plate steel for winch structure and mounting plates * Sides wrap around the fenders, and there's a bottom hoop that serves as protection for the low hanging radiator with an integrated steel skid plate * High-clearance design with improved approach angles * Optional "Baja Taco" headlight hoops and filler plates * Bolt-on installation (except on 1998-2000 models) * Integrated skid plate * Integrated winch and fairlead mounts * Heavy-duty recovery points * Light mounting tabs to mount up to 6 in. lights * Lower radiator protection (may require shorter 4-cylinder radiator to install) * Hardware included * Winch not included (sold separately) * Bumper ships bare steel
( 2 )
$799.99
—
$899.99
$679.99
—
$764.99
On Sale
Want better and easier access to your truck bed? Rock Slide Engineering has a solution that takes into consideration all the different ways you can use your truck. Their R-Step is available in two sizes having either a 9 in. or 16 in. wide stepping surface. Rock Slide Engineering R-Step truck bed steps provide a comfortable approach for getting safely in and out of your truck bed when hooking up a trailer or retrieving gear. The R-Step is a 2-step design that provides accessibility and convenience where you need it and is easy to deploy and fold up. Order one for your truck. Features: * Multiple mounting options depending on platform * Designed with two steps * Textured black powdercoat finish * Constructed of 11-gauge steel * Stainless steel and aluminum internals * Mounting brackets included
Not Yet Reviewed
$699.98
—
$749.98
$559.98
—
$599.98
On Sale
All-Pro tube bumpers were designed to meet off-road enthusiast's demands for a durable, low-profile bumper that looks as good as it functions. These front bumpers are ideal for trucks running 35 in. tires or larger and requiring a winch and light mounts. The bumpers are made from 1.75 in. x.120 in. wall tubing and 3/16 in. thick winch mounting plates. The tube bumpers can be ordered with an optional Stinger, dimple die fill plates, and side handles and fit most 10,000-lb. winches with a 4 1/2 in. x 10 in. mounting pattern. Fill plate option includes both side and top plates. Order the bumper with selected options for your application. Key features and specs: * Fits 4WD models only—not for use with 2WD vehicles! * 1.75 in. x.120 in. wall tubing * 3/16 in. thick winch mounting plate (winch not included) * Bolts on to factory locations * Recovery attachment points * Compatible with most winches up to 9.5 (winch not included) * Optional dimple die fill plates for strength and looks * Low-profile design * Maximum approach angle * Available with or without optional Stinger
( 2 )
$649.99
—
$929.99
$552.49
—
$790.49
On Sale
All-Pro Off-Road's 4Runner low-profile front bumpers are designed to fulfill your demand for a durable, low-profile bumper that looks as good as it functions. The bumpers are available in steel and lightweight aluminum versions, including models with hoop options for multiple lighting configurations. Aftermarket bumpers are a great way to add additional protection and functionality to the front end of your vehicle. There are a ton of different bumpers out there, but if you want to keep the OEM look and perform minimal cutting, the All-Pro Off-Road low-profile front bumpers are an excellent option. Choose the All-Pro Off-Road low-profile front bumper model that is designed for your application needs. Features and options may include: * CNC laser-cut, brake-formed, and MIG-welded 1/4 in. thick aluminum plate or 3/16 in. steel faceplate version that provides a solid mounting structure to vehicle frame * Available in bare and black powdercoat option * Improved approach angle and ground clearance * Optional LED hoop gives space to mount a single-row (30 in.) light bar (lighting not included) * Optional center hoop is tall enough to offer grille protection, as well as providing additional light mount tabs for pod lights (lights not included) * Integrated recovery points * Heavy-duty winch mounting (on select bumper versions) * Compatible with most 8-12k winches with a remote mount solenoid box (winch not included) * Includes mounting hardware * Bolt-on installation (cutting of factory plastic bumper required for installation)
( 1 )
$639.99
—
$849.99
$543.99
—
$722.49
On Sale
Low Range Off-Road Defiant Armor modular front bumpers are customizable, allowing you to choose the features you want to style and protect your Samurai. You choose the finish, the stinger or hoop styles, end lengths, and from a range of winch plates suitable for 0 to 3 in. body lift. The base winch mount of the bumper is made from 1/4 in. CNC laser-cut ASTM A36 steel and bent with a precision CNC press brake. The bumpers include a 2 in. receiver built into the winch mount that is compatible with many aftermarket winches. Make your choices to personalize the look and performance of your Samurai. Features: * Bare steel or durable black powdercoat finish * Stinger/hoop styles: -- Single bend -- Double bend -- Grille guard -- Grille guard with headlight guards * Side styles: -- Short ends -- Long ends -- Short ends with stubby ends * Sides come with LED light pods and new turn signals * Stubby ends increase width while keeping a low-profile * 1/4 in. thick winch mount plate with built-in 2 in. receiver * Center cap and sides made from 3/16 in. thick steel * Stingers are made from .120 in. wall x 1.75 in. O.D. DOM steel tubing * Plastic plugs to block off the unused bolt holes Note: You will need to splice the turn signals into the factory connectors.
( 1 )
$615.78
—
$931.43
$523.41
—
$791.72
On Sale
PureFlow AirDog II-5G Fuel Air Separation Systems are the next generation in fuel delivery for a variety of diesel engine applications. The 5G is designed to be the longest lasting, most efficient, and quietest lift pump. AirDog II-5G utilizes a diaphragm-style fuel pressure regulator, allowing the pump to be boost referenced and adjusted from 7-70 psi. The 5G fuel/air separation system features a 4-bearing motor with an intermediate shaft that improves reliability and reduces pump noise. A demand flow design allows the pump to only send the necessary amount of fuel to the engine. The dual feed motor supplies fuel to both sides of the gerotor pump to decrease air bubbles that cause cavitation. The 5G system features larger 3/4 in.-16 O-ring boss inlet and outlet ports. A 7/16 in.-20 (-4) low-flow return is used to prevent aeration in the fuel being sent back to the tank. Order the model recommended for your vehicle. Additional features: * 220 or 165 gph pump models available * 4-beating motor with intermediate shaft * Larger ports over previous pumps * Diaphragm fuel pressure regulator * Demand flow design * Reduced aeration from low flow return
Not Yet Reviewed
$788.00
—
$854.00
$709.00
—
$769.00
On Sale
When it comes to banging through brush, pushing other Jeeps off the trail, or pure toughness no matter what you're doing, you need to get RT Off-Road heavy-duty bumpers. These 3/16 in. thick plate steel bumpers with a gloss black powdercoated finish are tough enough to stand up to off-road abuse and still look great on the street. Front bumpers have D-ring mounts built in, and rear bumpers have a receiver hitch designed to be used with a D-ring receiver only. The bumpers include all hardware for installation and mount in the factory location. Whether you're helping pull out other vehicles or on the end of a strap yourself, RT Off-Road heavy-duty bumpers will get the job done.
( 2 )
$586.99
—
$612.99
$528.29
—
$551.69
On Sale
Introducing aFe's Terra Guard Trail Steps for your Subaru Outback—your key to elevated adventures! Conquer any expedition with confidence using the large, high-grip step pads for easy rooftop access. Durable steel construction ensures long-lasting strength, while the textured black powdercoat finish promises unmatched durability. Replacing factory cladding without drilling or cutting, this unique design utilizes original mounting points and allows for added ground clearance. Unlock the potential of your Outback and elevate your journeys with the Terra Guard Trail Steps: where functionality meets style! * LARGE STEP PAD AREA: High-grip step provides a secure platform to gain access to roof top storage and gear. * NO DRILLING OR CUTTING REQUIRED: Replaces factory lower plastic cladding, utilizing original mounting points with no drilling or cutting required. * SLOTTED DRAIN HOLES: Slotted drain holes in pinch seam rail allow for water drainage. * STEEL CONSTRUCTION: All steel construction for long-lasting strength and durability. * BLACK POWDERCOATED FINISH: Finished in a textured black powdercoating not only ensures long-lasting durability but also adds a touch of rugged elegance to your vehicle's appearance.
Not Yet Reviewed
$865.00
$778.50
On Sale
JET drill presses are manufactured with the weight and rigidity to maintain the tight tolerances required of metalworking applications and to provide a solid base for drilling. They feature a rugged cast iron design with ground-steel columns and an adjustable depth stop for drilling accuracy in metal, wood, and plastic. The head casting on these units includes a ball bearing spindle assembly, supported by four permanently lubricated, heavy-duty ball bearings that are mounted in an enclosed quill for extended life. Additional perks include a 45 degree table tilt, hinged metal belt, and pulley cover. They're ideal for use in maintenance shops and for industrial applications. Select the model that best suits your workshop needs.
Not Yet Reviewed
$736.99
$704.23
On Sale
Morimoto 4Banger HXB LED Wide Beam Lights illuminate the ground directly in front of the vehicle. The HXB Optics feature dual axis control—1) for width; and 2) active hot spot control, to project peak intensity right along the top of the beam pattern. The proper vertical gradient resembles an SAE-compliant fog light pattern, but with added intensity throughout thanks to the Osram HX Boost LEDs. The 4Banger HXB Wide beam delivers the best combination of width, intensity, and control—making it the most effective off-road LED fog light in the world. The overall footprint of the 4Banger HXB is approximately 30 percent smaller than alternatives that offer comparable performance. This allows for an unbeatable OEM+ like fitment when paired with Morimoto's fog light or A-Pillar mounting kits, which are available for today's most popular trucks. Don't be that guy with LED pods bulging out of your bumper. * PERFORMANCE: There are no "off the shelf" guts inside of a fancy housing here. Every element of the 4Banger HXB is proprietary. LucidShape was used to optimize performance around the most modern, lumen-dense LEDs from Osram. Thermal dynamics have been optimized using SolidWorks. The 4Banger HXB is available with three industry-leading beam patterns to suit every need: Wide/Fog, Spot, and Combo. * ALL WEATHER: The white-output version is ideal for all-around visibility. For those who desire optimal output in rain, snow, or fog—the Yellow-output version will slay in shady weather. Morimoto has opted for LEDs that produce yellow light at the origin, which is the most effective way to penetrate through particles in the air without compromising output. * RELIABILITY: High power means high heat, which is why the 4Banger features a copper DTP (direct thermal path) PCB that maximizes heat-transfer to the radiator, which has been optimized through numerous rounds of thermal analysis. The cast aluminum shell is electroplated before powder coating to withstand flaking. The potted internals, over-molded input wiring, and main gasket are all designed according to IP69K standards for full weather resistance. *BOLT-ON: Each set of Morimoto 4Banger LED pods include a set of pedestal mounts for a universal fitment. Morimoto also offers a variety of application-specific mounting bracket kits for fog lights and A-Pillars that make them bolt-on for many of today's most popular trucks.
Not Yet Reviewed
$677.00
—
$816.00
$541.60
—
$652.80
On Sale
All-Pro Off-Road APEXG3N front bumpers fulfill customer demands for durable, low-profile bumpers that look as good as they function. They're ideal for trucks running 35 in. or larger tires and those requiring winch/light mounts. Notable features include two built-in 4 in. light mounts, an integrated 30 in. light bar mount, plus an optional center hoop providing excellent grille protection and two additional light mount tabs. Fearlessly enjoy your truck's improved approach angle and ground clearance with an All-Pro Off-Road APEXG3N front bumper. Refer to Application tab to confirm fitment. Features, items, and specs: * Available in steel or aluminum * Installation hardware is included * Heavy-duty winch mounting * 2 integrated, beefy 1 in. thick recovery points made from 1 1/2 in. x 1/4 in. wall DOM tubing welded to 3/8 in. thick plates
( 1 )
$799.99
—
$849.99
$679.99
—
$722.49
On Sale
The Rough Country bed racks give you the flexibility to carry bulky cargo and outdoor equipment in your truck bed. They are just right for loading ladders, roof racks, bikes, and more with ease, and whether you're headed out for a camping trip or working under the sun on a job site, these bed racks keep all your equipment close at hand. With durable style, this innovative bed rack system is built from durable powdercoated aluminum for lightweight strength and durability. The modular design allows you to add as many crossbars as needed, and the molded end caps and T-slot covers give your truck that clean look you're looking for. Rugged enough to handle any payload you can throw at it, Rough Country's bed racks are sure to turn heads and help you carry your gear wherever you need it. Easy-to-install, these bed racks offer endless mounting options and adjustability, so you can customize them to suit your specific needs. The bed racks are available in half or full height styles, with mounting options for stake holes or bed rails. Select the Rough Country bed rack model designed for your application needs. Key product features: * Powdercoated aluminum for lightweight strength and durability * Available in half or full height styles, with mounting options for stake holes or bed rails (please specify bed rack model need when placing your order) * Modular design allows you to add as many crossbars as needed, and the molded end caps and T-slot covers give your truck that clean look * Endless mounting options and adjustability * Retain rear visibility—perfect choice for those who want to maintain a clear view while driving * Flexibility to carry bulky cargo and outdoor equipment in your truck bed * Easy-to-install, these bed racks offer endless mounting options and adjustability to suit your specific needs
Not Yet Reviewed
$589.95
—
$599.95
$539.95
—
$549.95
On Sale
Your fuel pump is the lifeline of your power plant. FASS Fuel Systems adjustable diesel fuel lift pumps have the power and versatility to keep your engine running strong. With their impressive adjustable range of 1 to 75 psi and flow capacities of up to 290 gph, they can keep even the thirstiest vehicles quenched. These pumps come equipped with boost compensation ports and built-in fuel pressure gauge ports, to maximize the control and efficiency of the fuel system. Their fabricated PTFE tubes can easily be cut to adapt them to different depths of fuel tanks, allowing your vehicle to operate down to about 1/8 of a tank of fuel. Order the style and options recommended for your vehicle.
( 1 )
$599.00
—
$749.00
$539.10
—
$674.10
On Sale
Body Armor 4x4 front bumpers for your Jeep are extreme off-road equipment that will impress and please the most righteous trail runners. They feature heavy-duty 2 in. x 5 in. 3/16 in. wall steel tube construction with weld enclosed ends, strong dependable fully welded shackles and "D" rings, and a run under bar with a 2 in. receiver. Extra-brawny skid plates for serious steering box protection are included with your CJ, TJ, and YJ bumpers, and their durable black powdercoated finish adds aggressive appeal, plus extra protection and corrosion resistance. Body Armor 4x4 triple and quad hoop bumpers are fitted with unique side pockets for convenient stepping and two outboard light tabs with an additional two light tabs on the top hoop. Even better, these bumpers are a direct-fit for your stock job--simply bolt them on, there is no drilling required.
( 3 )
$633.00
—
$644.00
$538.05
—
$547.40
On Sale
These BD Diesel exhaust manifolds help you maximize your engines true potential. Your stock manifolds can require extensive cleaning and machining to be recovered from warping and distortion. These heavy-walled manifolds are coated to resist corrosion, with some models even predrilled for pyrometer probes. BD Diesel exhaust manifolds are great preventative upgrades whenever you're doing other engine work.
( 45 )
$573.95
—
$659.95
$516.56
—
$593.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
