Availability
Showing In Stock Items. Show All 21 Items.
On Sale
Aeromotive dual-action adjustable fuel logs incorporate new features previously unavailable. Each carburetor inlet uses a ball and socket assembly that swivels 20 degrees, allowing additional clearance for throttle stops, throttle linkage, and other accessories. They offer a healthy inlet that can feed high-horsepower engines and feature manufacturing from quality materials and a strong finish, providing durability and great looks. They also provide dual NPT ports (machined in) that allow you to install fuel pressure gauges or pressure transducers. Set a new standard for your ride with the Aeromotive dual-action adjustable fuel logs quality-engineered to fit!
( 4 )
$847.70
—
$881.65
$762.93
—
$793.48
On Sale
COBB Tuning Subaru fuel rail line kits are incredibly robust. Offering 2,500 psi operating pressure and greater than 10,000 psi burst pressure, these kits allow for increased fuel capacity and consistent performance at each injector. Designed to be used along with COBB fuel rail kits, all lines are pre-assembled with double-swivel sport crimp-style hose ends; and the stainless reinforced PTFE line with black covering has a 3 in. minimum bend radius—which allows for a straightforward installation when used as intended. Upgrade your Subaru's fuel system with COBB fuel rail line kits, so you can take advantage of airflow modifications such as intakes, exhausts, or turbochargers.
Not Yet Reviewed
$595.00
$535.50
On Sale
COBB Tuning 1050x fuel injectors provide increased fuel flow, while maintaining stock idle and drivability with proper tuning. Want to run E85, or need more fueling for your specific application? COBB 1050x fuel injectors are the ticket; simply add the injectors, fuel pump, tune, and you're off to the races. Corrosion-resistant internals make these injectors compatible with all known fuels, and their replaceable inlet filter extends service life. Features include: * Nominal flow rate of 1065cc/min at 3.0 Bar (43.5 psi) using gasoline at 52 degrees C (125 degrees F) * Maximum differential fuel pressure of 10.0 Bar (145.0 psi) * Electrical connector—USCAR * Works with stock fuel rail * Matched sets with dynamic flow rate variance within 1 percent * 14mm bottom O-ring * Data supplied for tuning injectors with Accesstuner Software
Not Yet Reviewed
$625.00
$562.50
On Sale
Aeromotive Phantom 340 Stealth fuel systems include all the main components (including the highly sought, baffled Phantom 340 fuel pump) required to create a proper carbureted return-style or EFI fuel system for vehicles with OEM-style fuel tanks. They add a whisper-quiet internal pump to your stock tank that can deliver enough liquid energy to feed your high-performance street rod or muscle car, even in tanks as shallow as six inches! These systems provide a universal high-flow pre-pump filter and modular design that allows fitment to almost any fuel tank. Make the stealthy switch to Aeromotive Phantom 340 Stealth fuel systems and take advantage of modern technology in your classic ride! More product features, items, and specifications include: * Supports up to 700 horsepower on forced induction EFI setups and up to 850 horsepower on naturally aspirated EFI setups * Supports up to 860 horsepower on forced induction carbureted setups and up to 1,000 horsepower on naturally aspirated carbureted setups * Requires AN-06 fuel hose and hose ends for proper installation of fuel return/supply lines (all sold separately) * Black anodized hanger assembly and fuel-resistant baffle/basket (with foam and bladder) * Phantom 340 fuel pump (18688) * Fuel pump strainer * Retainer C-ring with studs * Gasket (1/2 in. thick) * Installation ring * Drill bit (No.2; 0.221 in. diameter) * Ring terminals and caps (2 each) * Hose clamp (1 each) and pump clamps (2 each) * Nylon-locking stainless steel No.10-24 nuts (10 each) * Locking No.10 nylon washers (10 each) * Machine screws - No.10-24 x 2 1/2 in. (2 each) * Foam spacer (1.0 in. wide x 1/2 in. thick) * Must be used with a return style fuel system * Designed for in-tank use only * Recommended tools include a 3 1/4 in. hole saw drill for metal, flathead screwdriver, 3/8 in. socket and ratchet, tape measure, and bread knife or hacksaw blade
( 43 )
$714.55
$643.10
On Sale
Aeromotive Phantom 200 Stealth fuel systems include all the main components (including the highly sought, baffled Phantom 200 fuel pump) required to create a proper carbureted return-style or EFI fuel system for vehicles with OEM-style fuel tanks. They add a whisper-quiet internal pump to your stock tank that can deliver enough liquid energy to feed your high-performance street rod or muscle car, even in tanks as shallow as six inches! These systems provide a universal high-flow pre-pump filter and modular design that allows fitment to almost any fuel tank. Make the stealthy switch to Aeromotive Phantom 200 Stealth fuel systems and take advantage of modern technology in your classic ride! More product features, items, and specifications include: * Supports up to 450 horsepower on forced induction EFI setups and up to 600 horsepower on naturally aspirated EFI setups * Supports up to 600 horsepower on forced induction carbureted setups and up to 750 horsepower on naturally aspirated carbureted setups * Requires AN-06 fuel hose and hose ends for proper installation of fuel return/supply lines (all sold separately) * Black anodized hanger assembly and fuel-resistant baffle/basket (with foam and bladder) * Phantom 200 fuel pump (18689) * Fuel pump strainer * Retainer C-ring with studs * Gasket (1/2 in. thick) * Installation ring * Drill bit (No.2; 0.221 in. diameter) * Ring terminals and caps (2 each) * Hose clamp (1 each) and pump clamps (2 each) * Nylon-locking stainless steel No.10-24 nuts (10 each) * Locking No.10 nylon washers (10 each) * Machine screws - No.10-24 x 2 1/2 in. (2 each) * Foam spacer (1.0 in. wide x 1/2 in. thick) * Must be used with a return style fuel system * Designed for in-tank use only * Recommended tools include a 3 1/4 in. hole saw drill for metal, flathead screwdriver, 3/8 in. socket and ratchet, tape measure, and bread knife or hacksaw blade
( 27 )
$647.70
$582.93
On Sale
Aeromotive VaporWorx ReturnX return-type 3 to 4-pump PWM controllers have everything needed to provide a standalone fuel pump speed control system for up to four high-powered brushed pumps. ReturnX has primary and secondary PWM controller output. Under normal idle/cruise driving, the #1 and #2 pumps are on the primary side and running fast enough to provide sufficient fuel pressure. The #3 and #4 pumps are attached to the PWM secondary output, but follow at a much lower duty cycle than the primary side. As the primary side increases in output power, so does the secondary side in a leader-follower arrangement that delivers a smooth ramp-up in pump speed. Key features: * For forced induction systems only * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent during idle and cruise * Standalone MAP sensor for pump speed control -- 2.5bar LSA/LS9 type -- Adequate range for supercharged applications * All pumps are under PWM control * Plumb fuel system using traditional regulators, filters, and return lines * Developed for in-cell use where the primary output feeds a lift and pressure pump, and the secondary output controller the third and fourth. Benefits: * Everything needed electrically to drive three or four fuel pumps * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 110-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 18 V operating capacity -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition * Easy to set idle/cruise primary pump speed adjustments * #3/#4 pumps ramp in automatically, no adjustments needed * Uses standard return-type plumbing systems, and can be used to replace currently installed Hobb's pressure switch + relay applications
( 1 )
$816.95
$735.26
On Sale
NOS Big Shot nitrous oxide systems are adjustable from 190 to 300 hp, depending upon the application. They have a precision-machined, 88-hole spray bar injector plate that allows fuel and nitrous to be fogged or atomized at much finer levels than older plate designs. We have upgrade kits to convert NOS Cheater systems to Big Shot specifications. Big Shot injector plates are also available, as are kits without the bottle. Racing fuel is required. Big Shot systems include: * Injector plate * Large-capacity solenoids * Large -6 AN nitrous feed line * Unfilled bottle * Jets * Brackets * Mounting hardware * Instructions
( 3 )
$1,099.95
$604.95
On Sale
Aeromotive replacement fuel cells are ready to feed the beast when your original Stealth tank meets its end. These natural aluminum finished cells feature AN-08 vents and rollover valves, 12-bolt flush mount lid assembly, and provisions for a return line. They have a 0-90 ohm universal sending unit, and do not include fuel pump modules. Choose the capacity needed for your application, then get your vehicle ready to rumble with Aeromotive fuel cells.
( 1 )
$693.35
—
$748.50
$624.02
—
$673.65
On Sale
Aeromotive VaporWorx BoostWorx PWM controllers for DualX ZL1 universal applications simplify installation and increase overall fuel system performance for dual OEM ZL1 fuel module applications. DualX uses a progressive ramping strategy with connections on the controller for the primary (pump 1) and follower (pump 2). The follower pump runs at lower duty cycle than the primary, allowing the follower pump to be on at all times, but at a lower average power, and allowing the pumps in the follower module to continually fill the reservoir with fuel, so it is ready to feed the engine under the most challenging conditions. As the primary pump increases in duty cycle, so does the follower, and once the primary is at 100 percent, the follower continues to increase to 100 percent duty cycle, as needed. This strategy is automatic and requires no user programming or adjustments. BoostWorx PWM DualX ZL1 fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, Hobb's switches, or filters needed -- OEM fuel level sensor can be used if desired * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * Can be used in constant or manifold referenced fuel pressure modes -- Manifold referenced suggested to further reduce electrical demand
Not Yet Reviewed
$630.20
$567.18
On Sale
Aeromotive VaporWorx ReturnX return-type triple-pump PWM controllers have everything needed to provide a standalone fuel pump speed control system for three high-powered brushed pumps. Offering primary and secondary PWM controller output, the primary provides sufficient pump speed to maintain fuel pressure during idle/cruise while the secondary pump follows at a lower duty cycle. As the primary side increases in output power, so does the secondary side in a leader-follower arrangement that delivers a smooth ramp-up in pump speed. Key features: * For forced induction systems only * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent during idle and cruise * Standalone MAP sensor for pump speed control -- 2.5bar LSA/LS9 type -- Adequate range for supercharged applications * All pumps are under PWM control * Plumb fuel system using traditional regulators, filters, and return lines * Developed for in-cell use where the primary output feeds a lift and pressure pump, and the secondary output controller feeds the third pump Benefits: * Everything needed electrically to drive three brushed fuel pumps * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 110-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 18 V operating capacity -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition * Easy to set idle/cruise primary pump speed adjustments * Uses standard return-type plumbing systems, and can be used to replace currently installed Hobb's pressure switch + relay applications
Not Yet Reviewed
$683.25
$614.92
On Sale
Aeromotive drop-in fuel pump assemblies will provide 2011-17 S197 and S550 Mustangs with the fuel they need to own the road or the track. The fuel pumps feature a compact, lightweight design that bolts into the existing fuel tank, making them an easy upgrade to your fuel system. These assemblies are available with a single fuel pump—all the way up to triple high-output fuel pumps. Don't settle for lesser quality equipment; feed your engine with an Aeromotive electric in-tank drop-in fuel pump assembly.
Not Yet Reviewed
$826.50
$743.85
On Sale
If you think the torque of that monster diesel is something to brag about, then you should feel it with the extra power of NOS diesel nitrous kits. These kits work with stock and modified applications. Vehicles with computer upgrades will benefit even more as nitrous will aid in a clean combustion. Comes complete with bottle, bottle brackets, nitrous feed line, large nitrous solenoid, electrical wiring, and complete instructions. Give your ride the kick it needs with NOS diesel nitrous kits. Features: * Specially designed for diesel engines, including Duramax, Cummins, and Power Stroke * Adjustable horsepower settings * Gains up to 75 hp on stock applications * Upgrade your fuel system or computer for additional 60 to 150 hp * Higher horsepower gain with computer modifications * Available with or without mini 2-stage controller * Choice of 10 or 15 lb. blue bottle
Not Yet Reviewed
$1,299.95
$714.95
On Sale
Do you want more power in your late model UTV? NOS offers UTV nitrous oxide systems that add horsepower at the flip of a switch. These kits include the NOS mini 2-stage progressive nitrous controllers for exceptionally smooth power delivery. The kits are engineered to be easily installed and require no modifications to your induction system. Choose from kits with different bottle sizes and components in classic NOS blue or stealthy black finish. Order the NOS plate wet nitrous system designed for your powersports application. Features: * Little to no modifications to the fuel system, depending on application * Adds additional horsepower with included jetting * Additional horsepower possible with optional jetting and upgraded fuel delivery system or upgraded clutch kit/belt (depending on application) * Includes jetting for multiple rear wheel horsepower (RWHP) settings * 6061 T-6 aluminum bottle (2.5, 5, or 10 lb. sizes) * Wet nitrous system provides exceptionally smooth power delivery * Billet nitrous plate: 0.450 in. thick with 2.045 in. bore (black anodized finish) fits between throttle body and intake manifold * Vapor Guard fuel tee or billet fuel rail adapter (depending on application) is used for easy plumbing of fuel to the wet nitrous plate * 4 AN feed line size * PowerShot fuel solenoid * Flare jet style
Not Yet Reviewed
$1,199.95
$659.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Lo-Ram intake manifolds are designed for GM Gen V LT engines equipped with GM LT cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine application. The top-feed plenum base intake manifold is designed with a reduced overall height to fit under a stock or mildly modified hood. The Lo-Ram provides a low-profile modular intake manifold that's suitable for use with plenum mounted air-to-water intercoolers for boosted applications. Various Hi-Ram plenum top options are available to complement the top-feed base intake manifold kits and fabrication flanges are offered to aid fabrication of plenum tops for custom installations. Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm, depending on the application * Low-height top-feed plenum profile to fit under a stock or mildly modified hood * Modular design and top entry plenum flange allows the use of popular Holley Hi-Ram plenum tops, as well as facilitating custom fabricated plenum tops—base manifold, plenum tops, and fabrication flanges available as separate kits * Designed for the accommodation of plenum mounted air-to-water intercoolers for boosted applications * Available models for OE direct fuel injection only and with port fuel injection provisions—for the port fuel injection option, the high-volume fuel rail kit includes hardware and brackets to accommodate long (usually standard length) fuel injectors or short * Kits with port injection provide high volume fuel rails with 3/4 in.-16 O-ring ports (8 AN) * Mounting hardware is included * 3.18 in. taller than a factory LT1 manifold
( 1 )
$999.95
—
$1,049.95
$649.95
—
$682.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. They will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Whether you're engine swapping your classic car or need to manage added horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever! Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application * Only 0.97 in. taller than a factory LT1 manifold provides maximum clearance under a stock or mildly modified hood * Modular design and front entry plenum flange allows design and fabrication of special throttle body adapters or inlet ducts for custom installations—base manifold, plenum top, throttle body adapter available as separate kits * Clears C7 Corvette cowls and hoods without modification * Available for OE direct fuel injection only or with added port fuel injection provisions * Kits with port injection provide high volume fuel rails with 3/4-16 O-ring ports (8 AN). Mounting hardware is included * Ultra Lo-Ram kits with a burst panel flange are available, Ultra Lo-Ram billet burst panel duct is offered separately (PN: 300-608 clear anodized, PN: 300-608BK black anodized)
Not Yet Reviewed
$949.95
—
$1,049.95
$558.95
—
$617.95
On Sale
FUELAB universal in-tank brushless fuel pump kits provide everything needed to get up and running with the latest pump technology. Designed for easy installation with many popular options, each kit includes a brushless fuel pump, PWM pump controller, 3-wire hermetic bulkhead feed-thru, pre-filter, wire leads and hardware. Order the kit best suited for your application.
Not Yet Reviewed
$800.00
$720.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
