Availability
On Sale
MSD Power Grid system controllers are the brains behind the entire Power Grid system, and they can be used with any MSD ignition or Pro Mag to provide advanced ignition tuning capabilities. While they're compatible with all MSD ignition boxes, they've been specially designed to mount on top of the Power Grid 7 ignition box. Features include: * USB connection for easy programming * Timing based on engine rpm and gear value * Advanced individual cylinder timing based on gear or time * Five retard stages for nitrous * Four steps of rpm limits for burnout, spool, launch, and overrev * Output switch set on rpm, pressure, or time * Shift light settings for each gear * Ignition data acquisition accepts multiple runs * View software * Wiring harness * Micro SD-card
( 10 )
$649.95
$583.95
On Sale
Get on the performance grid with MSD Ignition Power Grid power modules. When connected to the Power Grid, they will data log all the functions--including time from launch and time or rpm of activation and deactivation. These timing controllers feature four high-current, solid-state switches that can be configured independently or in conjunction by time, rpm, and temperature switching on/off, as well as by percentage for nitrous systems. Each channel is capable of handling 20 amps of current without the use of a relay and can be used to activate fan, fuel pump, nitrous oxide system, throttle stop, and more--the possibilities are endless.
( 1 )
$749.95
$673.95
On Sale
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1000 )
$573.95
$516.56
On Sale
AEM Electronics water/methanol injection kits allow you to increase boost pressure and advance timing without having to run higher-octane fuel resulting in significant horsepower gains.
( 35 )
$565.95
—
$674.95
$508.95
—
$606.95
On Sale
Aeromotive VaporWorx Ally Returnless PWM (Pulse Width Modulation) electronics kits for the KPM1500 fuel pump include the necessary parts to modify the KPM1500 (not included) to make it work properly for FSCM (fuel system control module)-equipped vehicles and aftermarket ECM/FSCM systems. The weakness of the OEM FSCM is power capability--they can drive one high-power pump, but not two. That's where VaporWorx Ally PWM kits come in. They provide the components needed to drive the second (KPM1500) fuel pump electrically while the FSCM handles the primary. Using pulse width modulation to slow down the pumps is very effective in keeping fuel temperatures down and relieving the electrical system of excessive load. Ally controllers help reduce the amount of power that the FSCM has at higher fuel demand, so at higher duty cycles the VaporWorx controller will start to out-run the FSCM and take more of the pumping power load. These Aeromotive VaporWorx kits are intended to be used as an Ally, or piggyback, system to help the OEM FSCM. No additional relays, Hobb's switches, etc. are needed.
Not Yet Reviewed
$577.15
$519.44
On Sale
FUELAB 529 Series electronic fuel pressure regulators work directly with the FUELAB Prodigy line of fuel pumps to reduce heat build-up and vapor lock conditions related to street/strip operation. Set the pressure mechanically like a traditional bypass regulator and let their demand-based speed control take care of the rest! These regulators generate a signal to the pump to control the return line flow rate. This feature reduces current draw while at low engine output to prevent fuel overheating--which could lead to system failure. Additional info: * Designed for use with FUELAB® Prodigy fuel pumps (41401,41402,41403,42401, and 42402 only) * Patented method for demand-based flow control; able to detect changes in demand before change in rail pressure is realized * Automatically reduces current draw at low flow demand * Additional analog output to track actual fuel system capacity * Independent system--no other connections, control boxes, or calibration required * Gasoline, diesel, methanol, and ethanol fuel compatible * Billet aluminum construction with anodized finish * Fine thread pitch for precise pressure adjustment * Versatile mounting bracket and stainless steel hardware * 1/8 in. NPT gauge port with plug for external pressure gauge * 1/8 in. NPT pressure reference port with barbed fitting
Not Yet Reviewed
$560.00
$504.00
On Sale
FUELAB electronic fuel pump controllers are enclosed in billet aluminum cases and are specifically designed to operate DC brushless fuel pumps. They're available in various speed control options and can operate up to 20 amps and 16 volts.
Not Yet Reviewed
$600.00
$540.00
On Sale
Power up your cycling workouts with the Garmin Tacx FLUX 2 Smart Trainers! Featuring an improved ride feel and more accurate power measurements, these smart bike trainers have everything you need for an enjoyable and efficient indoor training session. Work up a sweat with inclines up to 16 percent that hold up to your most serious sprints. Keep crushing it with your favorite apps like Zwift and Tacx via Bluetooth connectivity. The well-balanced design and large footprint of the FLUX 2 Smart Trainers ensure maximum stability, even during the most explosive sprints, up to 2,000 watts. Track your performance and progress with reliable, consistent measurements, which includes power, speed, and cadence, measured accurately within 2.5 percent. Get the most out of your indoor training session with Garmin's Tacx FLUX 2 Smart Trainer! Additional product details: * FLUX 2 Smart Trainer communicates via Bluetooth Smart technology and ANT+ FE-C protocol, so it works with a number of popular training apps * This direct-drive trainer is designed to bring vibration and noise levels to the absolute minimum, resulting in one of the most silent flywheel-equipped bike trainers available * Trainer comes with additional axle adapters to significantly improve the axle compatibility with 142 x 12mm and 148 x 12mm axles * Get the most out of your intense workouts by training on realistically simulated inclines up to a 16 percent gradient * At 16.8 lbs. (7.6 kg), a heavy flywheel ensures a realistic ride feel and good responsiveness * Take advantage of structured training plans, designed for your fitness level to help you meet your goals; race live opponents, upload GPS data, ride with 3-D maps and more * Enjoy a library filled with more than 100 high-quality, real-life videos that let you experience the rush of riding the steep hills of the Alps or the cobblestone roads of Milan * You can opt to use the trainer in stand-alone mode; when not connected, it will simulate a flat road so the faster you ride, the higher the resistance
Not Yet Reviewed
$831.99
$514.99
On Sale
With Garmin's RV 895 GPS navigation devices you'll travel with a large display, custom routing for the size and weight of your rig, plus vivid aerial views to help you with a smooth arrival at your RV park or campground. The large 8 in. GPS navigator features a bright, high-resolution edge-to-edge touch screen display, so you can easily see important information displayed in landscape or portrait mode. And you will go in the know with Garmin voice assist, live traffic, weather, and even fuel prices. You can get information for restaurants, attractions, and local spots to visit along your route or near your destination. Travel confidently and know what's ahead; get your adventure rolling with Garmin RV GPS navigation devices. In the box: * RV 895 * Vehicle suction cup with powered magnetic mount * Screw-down mount * 1 in. ball adapter with AMPS plate * Vehicle power cable * USB cable * Documentation
Not Yet Reviewed
$699.99
$599.99
On Sale
ZeroNoise features the most advanced communication systems in WRC. With its adaptive sound technology, ZN can deal with any car, surface, and driver's preference. ZeroNoise Pit-Link Trainer Kart Pro kits provide simple, straightforward systems that enable communication between driver and the pit. These kits include wearable Pit-Link amplifier(s), professional headset, USB microphone radio kit, and professional earplugs. ZeroNoise Kart Pro kits can be selected with either an Android or iPhone compatible headset, or with a USB-C amplifier compatible headset for the pit lane that also includes two Pit-Link Trainers—one for the driver and one for the pit. Select the kit with the proper headset.
Not Yet Reviewed
$615.00
$553.50
On Sale
FiTech Go Shift transmission controllers are standalone electronic transmission control kits. If you plan on upgrading your transmission and you're having trouble with the wiring, back up lights, or shift points, the new Go Shift system is for you. Now you can have the luxury of a modern transmission for better response, better fuel economy, and overall reliability thanks to this system.
( 11 )
$599.00
$539.10
On Sale
MSD 6-BTM CD ignitions are ideal for engines with a turbo or supercharger. Not only will they benefit from full power CD sparks, but there is also an adjustable boost/timing retard circuit to prevent detonation. The dash-mounted control knob lets you easily adjust the amount of timing retard from 0-3 degrees per pound of boost pressure. Dial away engine-damaging detonation by retarding the timing in relation to boost pressure, and run on the threshold of detonation for maximum power and efficiency. You also get overrev protection from the soft touch rev control. They work with 4, 6 (even fire only), and 8-cylinder engines using a distributor. They include rubber shock mounts and 3,000, 6,000, 7,000, and 8,000 rpm plug-in rev limit modules.
( 25 )
$749.95
$673.95
On Sale
Take all the comforts of home with you and power sensitive electronics and appliances when standard mains power isn't available with REDARC Pure Sine Power Inverters—they make it possible to plug-in anywhere and power all your luxuries from home. With a REDARC Pure Sine Wave Inverters in your off-grid setup, you can charge your phones, cameras, laptops and speakers, and run GPS, Bi-Pap machines, power tools, and coffee machines without fear of damaging your appliances. Utilizing a Pure Sine Wave output, these inverters ensure appliances run smoothly and efficiently, producing less heat and noise. REDARC Inverters feature multiple levels of protection including overload, short circuit and an over temperature and load controlled cooling fan, which is engaged when power consumption reaches a certain level. This ensures the inverter can work comfortably in even the harshest conditions. Want to control your Pure Sine Wave Inverter from up to 26 feet away? An optional remote on/off switch (sold separately) will allow you can control your inverter. It's designed so the inverter can be installed out of sight in your RV or truck. Features and benefits: * Pure Sine Wave Inverters available for different surge capabilities (please specify model you need when placing your order) * Perfect for powering: cameras, laptops, speakers, GPS, Bi-Pap machines, coffee machines, and power tools * Take all the comforts of home whilst you travel * Appliances run smoother and more efficiently, producing less heat and noise * Pure Sine Wave output * Input and output are fully isolated * Multiple levels of protection; overload, short circuit and an over temperature and load-controlled cooling fan * Optional remote on/off switch (sold separately) allows you to control inverter from a more convenient location
Not Yet Reviewed
$669.00
$568.65
On Sale
"Go Further" on your next overland adventure and stay connected with Rugged Radios 2-way GMRS mobile radio kits. Available in a powerful 45 watt or waterproof 25 watt models, GMRS (General Mobile Radio Service) radios will keep you talking for miles, while experiencing crystal clear communications with Rugged's low-loss, double-shielded cable transmitting through the GMRS-tuned antenna. Installation is fast and easy! Simply mount the radio, run the wiring, and connect the power. Off-road and adventure friendly antenna mounting locations allow positioning out-of-the-way of roof racks and overhead tents, perfect for overland and rock crawling. Some kits also include an easy-to-install antenna adapter mount for existing A-pillar light mounts. All mounts and hardware are included, and you can easily connect to intercom, headset, or any 5-pin accessory with the built-in Rugged Ready pigtail cable. Choose a kit designed for your vehicle with the GMRS radio you prefer. Features: * GMRS mobile radio--powerful GMR45 or waterproof GMR25 model * Will communicate with all GMRS and FRS radios: -- GMRS channels 1 to 7--5 watts -- GMRS channels 15 to 22--up to 50 watts -- Eight repeater channels -- 155 privacy codes * Best-in-class GMRS tuned antenna * Low-loss double-shielded antenna coax cable * Easy install interior radio mount * Driver or passenger side antenna mounts (depends on kit) * Antenna adapter for pillar lights (where applicable) * Talks to all other brand GMRS radios
( 1 )
$633.99
$507.20
On Sale
Finally, all-out performance distributors to replace the OEM GM LT1 Optisparks--MSD's Pro-Billet LT1 distributors. They feature a precision-machined billet aluminum housing that fits in place of the factory piece, a new pickup assembly, a trick timing adjustment mechanism, and a new MSD distributor cap and rotor. The pickup is an advanced optical encoder that has proven to be very reliable and stable through extreme rpm and conditions. The rotor is bolted to a drive assembly that is indexed to the shaft, and is stabilized through the use of a large ball bearing assembly. The distributors use an adjustment screw to advance or retard the timing by up to 5 degrees.
( 64 )
$799.95
$718.95
On Sale
MSD 7AL-2 Plus CD ignitions have all the features of the standard 7AL-2 with the addition of a 2-step rev control and a new diagnostic LED to deliver their full power at any rpm. Their multiple spark discharge circuitry gives better throttle response, off-corner performance, smooth idle, and more consistent launches. Their built-in soft touch rev control protects your engine from damage due to over-revving and they feature accurate rev-limiting action that's smooth, without backfires or roughness, and adjustments are easily made with plug-in modules. They can be triggered from points, magnetic pickups, crank triggers, and electronic amplifiers. MSD 7AL-2 Plus CD ignitions are available for 4, 6, and 8-cylinder engines. From NHRA to Circle Track, they're proven winners.
( 19 )
$849.95
$763.95
On Sale
MSD Pro-Billet Ready-to-Run EFI distributors are the perfect upgrade when you start making serious power with your EFI Ford or Chevy. They use a stock-style trigger pickup and come with plug-in connectors. Installation is simple by removing the stock distributor, then plugging in and bolting the new one in place! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. These distributors will smooth out the engine's idle, improve starting, and perform at a much higher rpm. Their housings are machined from billet aluminum, using state-of-the-art CNC mills and lathes. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing for accuracy through the entire rpm range. Chevy models also feature an extra-long sintered bushing at the bottom and an extra oil tract machined into the bottom of the housing for improved lubrication. The tract delivers oil directly to the cam and distributor gears. All of the shafts receive a QPQ coating for low friction wear, and resistance against corrosion from humidity and ozone buildup. The Chevrolet models have also been tested by the Underwriter's Laboratory, and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard.
( 93 )
$579.95
—
$632.95
$520.95
—
$568.95
On Sale
Classic Instruments Auto Cross Gray Series gauge sets feature matte black, low step bezels with flat glass and pool cue pointers. The design features clear, concise numerals and indices that are easy to read at any speed, with a gray outer accent stripe. Classic Instruments hand-assembles, inspects, re-inspects, calibrates, and tests every gauge before packaging and shipping them to ensure the perfection you're expecting. Auto Cross Gray Series is offered in 2-, 3-, 5-, and 6-gauge sets, with the 6-gauge available with Classic's performance-style bezels in aluminum or matte black. Auto Cross Series gauge sets: * 2-gauge sets include 3 3/8 in. or 4 5/8 in. speedometer or Speedtachular and Quad with fuel level, oil pressure, water temperature, and voltmeter * 3-gauge sets include 3 3/8 in. or 4 5/8 in. speedometer, tachometer, and Quad with fuel level, oil pressure, water temperature, and voltmeter * 5-gauge sets include 3 3/8 in. or 4 5/8 in. speedometer or Speedtachular with 2 1/8 in. or 2 5/8 in. short or full sweep fuel, temperature, pressure, volt gauges * 6-gauge sets include 3 3/8 in. or 4 5/8 in. speedometer and tachometer with 2 1/8 in. or 2 5/8 in. short or full sweep fuel, temperature, pressure, volt gauges
Not Yet Reviewed
$1,149.95
$632.95
On Sale
Build your classic with hand assembled New Vintage USA 1973-87 GM truck gauge packages. They are designed to install in the factory location while updating the style and function of your project's dash. Your build will receive the perfect fit with NVU's CNC laser-cut and formed mounting brackets plus, there are several styles to choose from. Their Woodward, 1940 or 67 Series offers a retro look or choose their Performance Series for a feel that is updated and modern without having the appearance of a race set. The gauges in these NVU direct-fit packages are designed with Phoenix Direct Drive technology that takes the instruments to a new level and provides more features. Bolt them on, wire them up, and off you go in great style with New Vintage USA 1973-87 GM truck gauge packages. Added notes: * Phoenix programmable speedometers and tachometers offer an unsurpassed amount of functions, tech, and style with an optimal amount of information displayed on high-tech mini OLED screens that are the same size as traditional odometer windows. * Direct Drive systems provide a better, easier way to wire multiple gauges, making your installation faster and trouble-free. You will no longer need to spend hours wiring up individual connections for each gauge. With NVU Direct Drive, installing your gauge package will be as simple as plugging into a port on the back of the driver gauge.
( 18 )
$879.99
$791.99
On Sale
New Vintage 1967-72 Chevy/GMC truck gauge packages offer original style and reliable instrumentation direct from Detroit, USA! The gauges in these NVU direct-fit packages are designed with Phoenix Direct Drive technology that takes the instruments to a new level and provides more features. Plus, they include a T-case, auxiliary lamps, turn signals, high-beam, and exclusive indicator gauge with warning lamps. Choose either their basic kit or their complete kit that comes fully assembled. With the direct fit and authentic looks you want, and the precision you need, New Vintage 1967-72 Chevy/GMC truck gauge packages are the right choice for your project. More about the exclusive Phoenix technology: * Phoenix programmable speedometers and tachometers offer an unsurpassed amount of functions, tech, and style with an optimal amount of information displayed on high-tech mini OLED screens that are the same size as traditional odometer windows. * Direct Drive systems provide a better, easier way to wire multiple gauges, making your installation faster and trouble-free. You will no longer need to spend hours wiring up individual connections for each gauge. With NVU Direct Drive, installing your gauge package will be as simple as plugging into a port on the back of the driver gauge.
( 12 )
$849.99
$764.99
On Sale
New Vintage USA 1940 Series analog gauges has the feel of the very popular aircraft and military instruments of the '30s and '40s, but with modern technology. They feature authentic graphics, white tipped pointers, domed lenses, and stainless steel bezels to provide an upscale "5-Star General" appearance. Available individually or in sets, the 1940 Series 6-gauge kits with programmable speedometers are based on New Vintage's Phoenix platform with user selectable inputs, OLED screens, and stepper motor technology. All 6-gauge kits with OLED screens feature Phoenix Direct Drive technology, by far the easiest way to wire up a 6-gauge kit. Added notes: * Phoenix programmable speedometers and tachometers offer an unsurpassed amount of functions, tech, and style with an optimal amount of information displayed on high-tech mini OLED screens that are the same size as traditional odometer windows. * Direct Drive systems provide a better, easier way to wire multiple gauges, making your installation faster and trouble-free. You will no longer need to spend hours wiring up individual connections for each gauge. With NVU Direct Drive, installing your gauge package will be as simple as plugging into a port on the back of the driver gauge.
Not Yet Reviewed
$599.99
—
$799.99
$539.99
—
$719.99
On Sale
New Vintage USA 1969-70 Mustang gauge packages are 4-gauge, musclecar-inspired sets with precision technology! These New Vintage Mustang packages easily install in your factory gauge carrier with the included precision laser-cut ABS backing plate. The gauges in these NVU direct-fit packages are designed with Phoenix Direct Drive technology that takes the instruments to a new level and provides more features. Choose either their '67 series with a 60s-themed OE look, or their popular '69 series gauges with exclusive graphics, through-the-dial lighting, and discreetly shaped turn signals and high-beam indicators built in. Keep your project true to the time and to your personal choice of style with precision New Vintage USA 1969-70 Mustang gauge packages. More about the exclusive Phoenix technology: * Phoenix programmable speedometers and tachometers offer an unsurpassed amount of functions, tech, and style with an optimal amount of information displayed on high-tech mini OLED screens that are the same size as traditional odometer windows. * Direct Drive systems provide a better, easier way to wire multiple gauges, making your installation faster and trouble-free. You will no longer need to spend hours wiring up individual connections for each gauge. With NVU Direct Drive, installing your gauge package will be as simple as plugging into a port on the back of the driver gauge.
Not Yet Reviewed
$879.99
$791.99
On Sale
MSD Digital E-Curve distributors will drop right into your engine and fire up with three simple connections! Not only are there no external controls or boxes to mount and connect, but you can set a timing curve with the twist of a rotary dial! That's right, no more springs or stop bushings to fumble with. A new digital module lets you select from 20 different "centrifugal" curves and five vacuum curves--that's 100 combinations! Simply remove the cap to access the rotary dials and select a curve to match your application. You can also set an rpm limit that will protect your engine from over-rev damage caused by a missed shift or driveline failure.
( 36 )
$749.95
—
$849.95
$673.95
—
$763.95
On Sale
Classic Instruments Moal Bomber series gauge sets transport your hot rod back to WWII. Classic Instruments and renowned custom builder Steve Moal joined forces to craft the authentic aviator look of WWII-era aircraft instruments with rugged Bomber bezels. These sets feature precision gauges with flat glass, white pointers, and a winged emblem with an "M" logo. The Bomber bezels are powdercoated in a matte black finish, amplifying the rough and rugged military look. Gauge sets can be purchased with or without Bomber bezels. Capture an authentic look for your post-war hot rod with Classic Instruments Moal Bomber series gauge sets.
Not Yet Reviewed
$999.95
$549.95
Modal Header