Availability
Showing In Stock Items. Show All 6 Items.
On Sale
Aeromotive electric in-tank fuel pumps are replacement elements for your 6.5, 15, and 20 gallon fuel cell kits. These quality pumps are direct replacements for the original pieces in your Aeromotive fuel system. They're available with or without a filter. Goin' in-tank is great! Aeromotive replacement electric in-tank fuel pumps keep the fuel pumpin'.
Not Yet Reviewed
$624.90
—
$702.90
$562.41
—
$632.61
On Sale
Aeromotive VaporWorx ReturnX return-type 3 to 4-pump PWM controllers have everything needed to provide a standalone fuel pump speed control system for up to four high-powered brushed pumps. ReturnX has primary and secondary PWM controller output. Under normal idle/cruise driving, the #1 and #2 pumps are on the primary side and running fast enough to provide sufficient fuel pressure. The #3 and #4 pumps are attached to the PWM secondary output, but follow at a much lower duty cycle than the primary side. As the primary side increases in output power, so does the secondary side in a leader-follower arrangement that delivers a smooth ramp-up in pump speed. Key features: * For forced induction systems only * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent during idle and cruise * Standalone MAP sensor for pump speed control -- 2.5bar LSA/LS9 type -- Adequate range for supercharged applications * All pumps are under PWM control * Plumb fuel system using traditional regulators, filters, and return lines * Developed for in-cell use where the primary output feeds a lift and pressure pump, and the secondary output controller the third and fourth. Benefits: * Everything needed electrically to drive three or four fuel pumps * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 110-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 18 V operating capacity -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition * Easy to set idle/cruise primary pump speed adjustments * #3/#4 pumps ramp in automatically, no adjustments needed * Uses standard return-type plumbing systems, and can be used to replace currently installed Hobb's pressure switch + relay applications
( 1 )
$816.95
$735.26
On Sale
Aeromotive VaporWorx ReturnX return-type triple-pump PWM controllers have everything needed to provide a standalone fuel pump speed control system for three high-powered brushed pumps. Offering primary and secondary PWM controller output, the primary provides sufficient pump speed to maintain fuel pressure during idle/cruise while the secondary pump follows at a lower duty cycle. As the primary side increases in output power, so does the secondary side in a leader-follower arrangement that delivers a smooth ramp-up in pump speed. Key features: * For forced induction systems only * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent during idle and cruise * Standalone MAP sensor for pump speed control -- 2.5bar LSA/LS9 type -- Adequate range for supercharged applications * All pumps are under PWM control * Plumb fuel system using traditional regulators, filters, and return lines * Developed for in-cell use where the primary output feeds a lift and pressure pump, and the secondary output controller feeds the third pump Benefits: * Everything needed electrically to drive three brushed fuel pumps * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 110-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 18 V operating capacity -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition * Easy to set idle/cruise primary pump speed adjustments * Uses standard return-type plumbing systems, and can be used to replace currently installed Hobb's pressure switch + relay applications
Not Yet Reviewed
$683.25
$614.92
On Sale
Holley diecast in-tank retrofit fuel pump modules are quick and easy ways to convert your factory tank or fuel cell into an EFI in-tank fuel system, while also adding the benefits of a Holley HydraMat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a diecast pump hanger bracket to control pump vibration, while also providing a low-profile design to fit where space is at a premium. Holley's innovative clamping system and integrated fuel pump makes it a simple install. Interested in an EFI retrofit kit, but can't get past the complicated fuel system? Holley diecast in-tank retrofit fuel pump modules are your solution. They're available in various flow rates, as well as return and returnless versions. Features include: * Installs in any fuel tank from 6.5 in. to 12 in. deep (depending on kit) to fit a wide variety of applications * The low-profile design is only 1.275 in. above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit * The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride * Includes innovative Holley HydraMat to ensure consistent fuel supply. The 3 in. x 15 in. HydraMat mounting flange has six clocking pin locations to allow for 360 degrees of adjustment to clear sending unit levels or any tank floor restrictions that you might encounter * Diecast aluminum construction for corrosion resistance and long-lasting good looks * 1/4 in. NPT ports for a wide variety of plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Two different fuel pumps are available—255 lph or 400 lph for both return and returnless-style systems
( 13 )
$777.95
$505.95
On Sale
FUELAB continues to lead the way in fuel pump innovation. FUELAB H/E Series fuel pumps are brushless, twin-screw pumps that represent a giant leap in efficiency and reliability. These pumps use a lightweight, DC brushless motor to reduce current draw. Combined with a twin-screw rotor pumping mechanism, they offer superior priming capabilities and improved resistance to cavitation. Available with flow ratings of 250 to 500 lph (@ 13.5 V, they are simply the best pumps on the market today. They feature billet aluminum construction with an integrated controller. Features include: * 3-phase DC brushless motor with neodymium magnets * Integrated electronics with no speed control * Billet aluminum, stainless steel construction with flourosilicone seals * Screw-style pumping mechanism * Wet motor design, without dynamic shaft seals * Port O-rings, mating electrical connector, instructions, and performance certification included * 8 to16 V operating range * Use only 12 V (6-cell lead acid battery) vehicle systems with or without charging system * All models require bypass regulator or relief valve to avoid over-pressure operating condition * Integrated 2-pin Delphi Weatherpack connector (external models only) * Integrated cushioned billet bracket system (external models only) Fuel compatibility includes: * Gasoline (pump and race) * Diesel * Methanol * Ethanol (including E85)
Not Yet Reviewed
$844.00
$759.60
On Sale
Aeromotive A1000 Stealth fuel pump assemblies provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these assemblies use O-ring clamps to positively seal the provided tube to both the filter pickup and the pump inlet, allowing for perfect placement of the pickup to ensure superior performance! Aeromotive A1000 Stealth fuel pump assemblies are constructed for cool and quiet operation. They feature a 100 micron stainless steel fuel filter, pickup, gaskets, a mounting ring, bolts, and washers for an easy installation.
( 2 )
$881.65
$793.48
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
