Availability
Showing In Stock Items. Show All 123 Items.
On Sale
Compact, vehicle-mounted ARB on-board high performance twin air compressors are designed to do everything! Activate your ARB Air Locker differentials, air up a 35 in. tire in less than a minute. and run air tools. These 100 percent duty cycle (under room temperature conditions) compressors are built to support all of your compressed air needs including the high-volume airflow needs of most air-powered tools. Features of ARB on-board high performance twin air compressors include: * Constructed primarily of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Pressure switch-controlled air manifold system regulates pressure * Highest air flow rate and high-efficiency design minimizes power consumption * Sealed components for moisture and dust resistance * Hard-anodized cylinder bores and PTFE-impregnated carbon fiber piston seals for reduced friction and maximum life * Ducted, sealed, brushless DC cooling fan and anodized motor mount brackets effectively dissipate heat from the motors, heads, and electronics * Anti-vibration, sound-deadening mount * Relocatable, splash-resistant air filter assemblies for cleaner, cooler air supply and versatile water-resistant air intake positioning * High-density and high-flow washable sintered bronze air filter elements * Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids (requires Air Locker manifold kit ARB-171503, sold separately, to mount solenoids) * Dual, heavy-duty Maxi-Fuses for in-line circuit protection and true circuit redundancy in case of a fault * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Motors are internally thermal-protected against extreme temperature damage * Compressor pistons equipped with a heavy-duty, European-made cylindrical roller bearing * Over-pressure safety valve-equipped * Sealed, illuminated, automotive-grade dash switch included * Fully serviceable, replacement parts available * EMF-suppressed for use in proximity to sensitive electronic equipment * CE and C-Tick compliant * Engineered, built, and individually dyno-tested in Australia
( 4 )
$659.95
—
$851.70
$593.96
—
$766.53
On Sale
RideTech HQ coilover kits are designed with handling performance and ride quality in mind. They feature impact-forged aluminum threaded body monotube, gas-pressurized shocks that have been clear anodized for corrosion protection. Other features include: oversized rod guides for maximum strength and durability; Delrin coilover spring washers for easy spring retainer adjustments; stainless steel mounting brackets; and CNC-machined billet hardware. The shocks include Hyperco springs (made with high-tensile premium cold-wound steel) that have a durable powdercoat finish. The unique pinch-clamp height adjusters offer finer threads for easy height adjustment. Order the kit designed for your specific vehicle.
( 14 )
$840.00
$756.00
On Sale
BMR A-arms stabilize your vehicle. A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. BMR Suspension A-arms are fabricated from heavy-duty 0.095 in. wall DOM tubing with laser-cut, CNC-formed plate steel for extra strength and to eliminate deflection. BMR A-arms are fitted with heavy-duty ball joints and 95-durometer polyurethane bushings for a solid, more responsive feel over the stock rubber bushings. Polyurethane adds strength and reduces deflection over the stock rubber bushings, while still absorbing much of the NVH, providing you with a great blend of performance and comfort. Designed for street performance, drag race, handling, and pro-touring applications, BMR A-arms give you improved geometry and increased lateral grip during cornering situations.
( 110 )
$559.95
—
$869.95
$503.96
—
$782.96
On Sale
RideTech StrongArm tubular control arms are designed to stiffen up your vehicle's chassis, while providing a smoother ride. They feature a tubular design that offers maximum strength—and are available for a variety of front and rear positions. The control arms include bushings and factory-installed ball joints (front), making installation easier. Get optimum suspension geometry with a set of RideTech StrongArm tubular control arms; order the kit recommended for your vehicle.
( 17 )
$575.00
—
$845.00
$517.50
—
$760.50
On Sale
RideTech HQ Series 4-Link coilovers feature a monotube gas pressure design that offers fade-free performance. Their springs are made of high-tensile premium steel that's CNC cold-wound. They weigh less, are more resistant to bowing, and have increased travel with a durable powdercoated finish. Machined from impact-forged aluminum for superior strength, these shocks feature a large piston that provides outstanding ride quality, a double-sealed rod guide with a dust cover that eliminates oil leakage, and an anodized finish that protects against corrosion. RideTech HQ Series 4-Link coilovers give hot rodders the ultimate in ride quality, handling, and performance. Order the kit designed for fitment on your vehicle application.
( 7 )
$620.00
—
$840.00
$558.00
—
$756.00
On Sale
Eliminating wheel hop and tire chatter during acceleration is the primary role of the traction bar system. With modern big horsepower and large sticky tires the stock leaf spring suspension in the F150 is prone to providing considerable issues. Working in conjunction with the RideTech lowering system, RideTech Ford F150 traction bar kits eliminate these ill effects and provide hard launching, plus smooth and powerful acceleration both from a straight line and coming out of a corner. They require the complete rear Ridetech lowering system to be installed … and together will get your F150 planted and riding smooth and comfortable for the long haul.
Not Yet Reviewed
$875.00
$787.50
On Sale
RideTech triangulated 4-link systems are designed for the the professional builder who wants a straightforward, no-compromise rear air ride suspension. They do not require a panhard bar, and feature round, 0.219 in. thick 4-link tubing. The systems include the 4-link mounting brackets for the front and rear, as well as the installation hardware. Welding is required to mount one of these kits to your vehicle.
( 5 )
$765.00
$688.50
On Sale
A lightweight setup capable of handling everyday street abuse! UMI Performance front non-adjustable lower A-arms remove 5 1/2 lbs. from of the front of your vehicle, while adding increased ride quality and reducing bushing deflection. These suspension control arms are supplied with new greaseable ball joints installed, polyurethane or Delrin® bushings, and sway bar mounting provisions. The A-arm replacements are fabricated using 1.250 in. drawn-over-mandrel tubing and CNC-machined ball joint holders. They feature both MIG and TIG welding for the utmost in product strength. Order the pair recommended for your vehicle. Additional features: * 1.250 in. x 0.120 in. mild steel tubing * Shock mounts are CNC-machined from 0.188 in. steel plate * Supplied fully assembled and ready to install * Durable black or red powdercoat finish * Use OEM hardware
( 10 )
$669.99
—
$799.99
$602.99
—
$719.99
On Sale
RideTech TruTurn steering systems resolve poor suspension geometry, bad bump steer, and clearance issues on your early Camaro/Nova front-end. These packages include taller overall spindles to improve camber gain, steering arms designed to correct bump steer, and drag link brackets that bolt to your OEM drag link. They relocate your inner tie rod and minimize bump steer, and their tie rod assemblies are designed to integrate with your new steering arms and center link for a bolt-on system. RideTech also offers upgrade packages with the same components minus the spindles. Choose a "Tru" no-fab steering system for your muscle car. They're available for a variety of cars from the 1960s and '70s
( 6 )
$750.00
$675.00
On Sale
UMI Performance rear control arms and sway bar kits are direct bolt-on replacements designed to minimize wheel hop and improve cornering and track consistency, while lowering ETs. They include upper and lower control arms, adjustable frame braces, bushings, rear sway bar, and Grade 8 mounting hardware. Choose the powdercoat finish you prefer.
( 14 )
$799.99
$719.99
On Sale
RideTech has upgraded the traditional notion of sway bars with their MuscleBar. Using precision CNC tubing benders, investment cast steel bar ends, and Delrin lined mount bushings, Ridetech produces sway bars with unheard of dimensional and rate accuracy. MusceBar features: * Precision CNC-bent tubing for accurate and repeatable fitment * Exact bar rates included with each bar * Delrin-lined frame mount bushings allow easy and predictable rotation over the stiction of polyurethane or rubber * Investment cast steel bar ends offer performance and appearance improvements over the traditional manufacturing * Easy installation spherical end links with barrel lock nuts * Compatible with OE manual steering, OE power steering, and aftermarket power steering conversions
( 24 )
$575.00
—
$595.00
$517.50
—
$535.50
On Sale
UMI Performance sway bars are designed to reduce body roll and understeer and increase cornering capabilities, resulting in a more balanced suspension. The front sway bar is more rigid than the factory model and comes complete with new polyurethane end links and greaseable sway bar bushings. The rear sway bar is supplied with new Grade 8 mounting hardware and locknuts. UMI Performance sway bars are manufactured from 4140 chromoly steel—and formed as one piece to ensure maximum strength and performance. Each rear sway bar is heat-treated and heat-formed to maintain longer memory than a cold bent bar, while the front sway bar is CNC-bent for a precise and accurate fit every time. Order the kit recommended for your vehicle.
( 71 )
$579.99
$521.99
On Sale
Aldan American Road Comp coilover kits are hand-built in the USA to replace your factory shocks and springs with drastically improved handling and ride quality. These kits are designed for specific vehicle applications and offer shock bodies crafted from lightweight, high-strength, CNC-machined 6061 T-6 billet aluminum. They're matched with high-tensile chrome silicon steel coil springs for strong, consistent performance. A black powdercoat provides added durability and a pleasing appearance. The coilover shocks ship fully assembled and are factory serviceable by Aldan American. You can order a pair for either the front or rear suspension, or a complete set for the entire vehicle.
( 42 )
$669.95
—
$856.95
$602.96
—
$771.26
On Sale
When an independent front suspension (IFS) vehicle is fitted with a suspension lift, the caster and camber can be pushed outside factory specifications. IFS vehicles generally have a few degrees of adjustment in their camber and caster from the factory. Adding these Old Man Emu control arms brings the alignment cams back into an acceptable range for both caster and camber. Each control arm is carefully constructed to meet all VSB14 requirements. The ball joint housings and eyelets are made from forged steel for added strength. The ball joints are greasable and include protective caps to endure rough conditions, while also holding up long-term. All of this is coated in a durable black powdercoat finish that looks great and protects the control arms. Order the pair recommended for your vehicle application.
( 2 )
$679.95
$611.96
On Sale
UMI Performance bolt-in Viking front coilover kits offer a true 2 1/2 in. racing coilover setup for your ride. UMI's Viking Worrier shocks are double adjustable and easily change from street use to high rebound force for race use. By increasing the rebound force, you can eliminate pitch and roll while making the car stay flat during transitions. Viking Worrier shocks offer a wide range of compression dampening and can be dialed in from a comfortable cruise setting all the way up to full race settings. The kits are available with different spring rates; order the kit designed to fit your vehicle. Additional details: * Viking shocks use upper/lower bearings, eliminating polyurethane and rubber, for crisp response and great reliability * Adjustable compression * Adjustable high rebound Worrier AT valving * CNC laser-cut brackets with black powdercoat finish offer precision fit * Direct bolt-in with no welding, minor trimming required
( 6 )
$764.99
$688.49
On Sale
Aldan American Phantom coilover kits assist you in drastically improving the handling and ride quality of your vehicle. Hand-built by master craftsmen in the USA, these direct-fit kits feature Phantom lightweight single-adjustable (either rebound or compression) shocks. They are CNC-machined from high-strength 6061 T-6 billet aluminum and wrapped with high-tensile chrome silicon steel coil springs for strong, consistent performance. A black powdercoat provides added durability and a pleasing appearance. Phantom coilover kits ship fully assembled with springs compressed and anti-seize applied—plus, they're factory serviceable by Aldan for a lifetime of performance. Order the length and spring rate preferred for your application.
( 8 )
$679.95
—
$734.95
$611.96
—
$661.46
On Sale
UMI Performance suspension lowering kits are designed to give your ride a lowered stance, with improved handling and control. Packaged with shocks and/or struts and springs, UMI utilizes premium CrSi wire wound into different spring rates to fit various applications for daily driving, street cruising, carving corners, and even light racing use. You can provide your vehicle with a different attitude and performance using a UMI suspension lowering kit.
( 1 )
$665.99
$599.39
On Sale
UMI Performance tunnel mounted torque arms are a proven fourth-generation setup designed to remove the front mounting point of the torque arm off of the transmission, protecting the tailshaft from damage. They also work great for transmission swaps when a clamshell torque arm is not feasible. These torque arms include instant center adjustment brackets and can be purchased with or without a front driveshaft loop. They bolt into existing floor pan holes with no drilling or welding required.
( 39 )
$569.99
—
$599.99
$512.99
—
$539.99
On Sale
For a strong, streetable setup without the weight of stock, add UMI Performance adjustable lower front A-arms and lose 8 lbs. on the front of your 1993-2002 GM F-body. What you gain are added strength and increased performance. These adjustable A-arms are built strong using DOM steel tubing, 3/16 in. thick CNC-machined shock mounts, new ball joints, high-quality chromoly spherical PTFE-lined rod ends, and greasable polyurethane bushings.Or the chromoly version uses 1.250" x 0.095" 4130 chromoly tubing, maintaining strength and reducing product weight by an additional 2 lbs, 10 lb total reduction. They're finished in your choice of durable red or black powdercoating. Whatever your application, race car or daily driver, UMI Performance 1993-2002 GM F-body adjustable lower front A-arms can handle your setup and lighten your load.
( 2 )
$669.99
—
$699.99
$602.99
—
$629.99
On Sale
Stifflers Suspension long bar traction systems get you hooked up with power-to-the-ground performance. The systems feature extra-strong and stiff chromoly bars that are adjustable and equipped with high-strength rod ends to hold up against the most demanding conditions. Stifflers has developed a selection of systems to up the performance of your older or newer Ford F-150 truck. Stop spinning your wheels and get a grip with Stifflers long bar traction systems. Stifflers F-150 long bar traction systems offer: * Quicker weight transfer * Decrease 60 ft. times * Reduce wasted horsepower * More responsive and repeatable suspension tuning
( 8 )
$589.95
$530.96
On Sale
BMR Xtreme anti-roll bars feature a massive diameter and include heavy-duty rod ends. These sway bars have an easy bolt-on design with the option to be welded, if desired. The factory rear sway bar works well for handling, but falls short when it comes to drag racing. There are two main reasons for this—the OE bar diameters are nowhere near the right diameter to control torque loading on a launch, and the OE-type bar only attaches at the control arms with no frame attachment points. This allows for too much body separation and no way to control it. By attaching the end links to the frame, body separation is minimized and converted into forward momentum. This, combined with the large diameter bar's ability to better control torque loading, creates more consistent and predictable launches and better 60 ft. times. BMR Xtreme anti-roll bars come with all necessary Grade 8 mounting hardware.
( 26 )
$569.95
—
$839.95
$512.96
—
$755.96
On Sale
UMI Performance extended length lower/adjustable upper control arm kits tackles the factory wheelbase problem. The extended-length (5/8 in.) lowers reposition the wheel properly in the wheelhouse, while the extended length rod end-adjustable uppers control pinion angle and lateral location. The kits are available with a durable red or black powdercoat finish. Choose a set designed for your vehicle in the color you prefer.
Not Yet Reviewed
$619.99
$557.99
On Sale
UMI Performance rear double adjustable upper and lower control arms are the most important things when tuning in your street car's suspension. UMI Performance rear double adjustable upper control arm mounting points feature CNC-machined 0.250 in. mild steel, 4140 chromoly tube adapters, and a high-strength, 4140 chromoly, heat-treated, 1.000 in. solid adjuster. UMI Performance rear lower control arms feature TIG-welded fabrication, reinforced sway bar holes, and PTFE-lined spherical rod ends. The construction of the lower control arms features 0.120 in. x 1.500 in. mild steel DOM tubing. Each end utilizes threaded tube adapters that are CNC-machined from 4140 chromoly to ensure overall strength and improved thread durability. Additional features include: * On-car adjustability * 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod ends * Precision CNC-machined and fully welded * CNC-machined 6061 aluminum step bushings * Durable powdercoated finish
( 3 )
$619.99
$557.99
On Sale
UMI Performance rear adjustable upper and non-adjustable lower control arms are direct replacements for the OEM setup. They add strength, ride improvement, and most importantly, rear-end adjustment. UMI Performance rear adjustable upper control arms are constructed from aircraft-quality 4140 chromoly steel and feature TIG-welded construction. The upper control arm mounting points feature CNC-machined 0.250 in. mild steel, 4140 chromoly tube adapters, and a high-strength, 4140 chromoly, heat-treated, 1.000 in. solid adjuster. UMI Performance rear lower control arms feature CNC-machined 0.120 in. wall thickness mild steel tubing, fully TIG-welded construction, greasable polyurethane bushings, and Zerk grease fittings. Additional features include: * On-car adjustability * 4140 chromoly threaded tube adapters * 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod ends * CNC-machined 6061 aluminum step bushings * Durable powdercoated finish
( 17 )
$599.99
—
$619.99
$539.99
—
$557.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
