Availability
Showing In Stock Items. Show All 115 Items.
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$329.95
—
$549.95
$296.95
—
$493.95
On Sale
Replacing older OE converters can be a challenge, often compelling customers to settle for makeshift solutions. You can remedy such an issue by choosing a LuK Clutch TorCon torque converter to restore smooth shifting to your automatic transmission. LuK's selection of converters provide the correct fit and function, covering a wide range of vehicles, assuring you will be able to find the proper unit for your vehicle.
( 2 )
$349.99
—
$491.99
$314.99
—
$442.79
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$399.95
—
$549.95
$359.95
—
$493.95
On Sale
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$517.95
$465.95
On Sale
Control your vehicle emissions with Flowmaster direct-fit catalytic converters. With designs available for hundreds of vehicles from the 1980s and up, these cats meet or exceed USEPA 49-state requirements. They feature stainless steel construction with compression-bent tubing and are ready to bolt-on. Select the replacement model and options recommended for your application.
( 106 )
$499.95
$448.95
On Sale
B&M converter lockup controls provide dash-mounted control to govern converter lockup at any speed between 30 and 90 mph. An LED display tells whether the converter is locked or unlocked. These kits eliminate converter lock and unlock cycling and premature unwanted converter lockup, avoiding engine lugging and spark knock. They also provide lockup at highway speeds for fuel economy. These kits are perfect for converter lockup operation when converting a non-lockup equipped vehicle to a lockup-style transmission and converter.
( 47 )
$340.95
—
$366.95
$306.85
—
$330.25
On Sale
Flowtech catalytic converter Y-pipes are ideal for connecting Flowtech headers to the stock catalytic converter equipped exhaust system of your late model vehicle. These high-flow Y-pipes are made from thick steel tubing and are individually designed for specific applications, which cover a diverse group of vehicles.
( 43 )
$277.95
$250.15
On Sale
Pypes converter-back exhaust systems feature mandrel-bent 304 or 409 stainless tubing, tailpipes, plated hardware, and hangers. Depending on your application, the systems include one or two quality mufflers. Order the model designed for fitment and performance on your specific vehicle.
( 37 )
$343.79
—
$575.79
$303.79
—
$535.79
On Sale
Brothers Trucks fuel tanks are the result of a creative solution for an easy under bed gas tank conversion when you want to move the classic or vintage stock setup from in or near the cab. They combine a Brothers tank with appropriate hardware for easy installation. While modifications are required for the new fill neck location, in most cases, the rear frame crossmember is unaffected by this installation. Increase the safety factor of your classic truck or SUV with an assist from Brothers Trucks fuel tanks. More product features and specifications include: * Classic applications model includes straps, lock ring, and hardware * Vintage applications model includes special mounting brackets and will require an application-specific sender (original spare tire crossmember removal may be required)
( 1 )
$349.95
$314.95
On Sale
These QuickTime flexplates have been designed and engineered to fit your OEM transmission without any modifications. They are made from durable H70 grade steel and are double welded/TIG welded for durability. These QuickTime flexplates are also zinc plated for long lasting finish.
( 5 )
$299.95
—
$486.95
$267.95
—
$269.95
On Sale
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 54 )
$303.99
—
$330.99
$286.99
—
$311.99
On Sale
Pypes header/crossmember-back exhaust systems are designed to boost your car's performance to the next level with more power and better mileage. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge stainless steel pipe. Also included are stainless steel hangers, clamps, and instructions; their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model recommended for your vehicle.
( 13 )
$575.79
$535.79
On Sale
Holley Sniper in-tank retrofit fuel pump modules offer the easiest way to convert your vehicle to an in-tank EFI fuel system. Available in return and returnless versions, these 340 lph pumps are easy to install with basic hand tools and require no welding or fabrication. They include a diecast pump hanger bracket to control pump vibration in a low-profile design that's perfect wherever space is at a premium. You can locate the module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power source/ground and fuel lines. Up your fuel game with an assist from the Holley Sniper in-tank retrofit fuel pump modules best suited for your application. Features and specs include: * Models available for various fuel tank depths, including adjustable (7-12 in.) versions * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations * Diecast aluminum construction for corrosion resistance and long-lasting good looks
( 28 )
$349.95
—
$518.95
$314.95
—
$466.95
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 28 )
$339.95
—
$632.95
$305.95
—
$493.95
On Sale
Scott Drake removable door hinge kits are made by Scott Drake! Beautiful, high-quality polished stainless steel treats your Bronco to the benefits of removable doors. Perfect for your open-air cruise or trail ride, these kits come with four removable-style door hinges, two quick-release door check brackets, two nylon web door straps with stainless anchors, and all the hardware needed to convert your Bronco. Remove your door whenever you want with Scott Drake removable door hinge kits.
Not Yet Reviewed
$399.95
$359.95
On Sale
Convert to a more convenient spin-on style filter and lower your ongoing filter maintenance costs with Fleece Performance underbed fuel filter assemblies. They upgrade your factory filtration with an anodized billet aluminum filter base and Donaldson spin-on canister-style filter, along with Water-In-Fuel (WIF) sensor, and integral high-flow fuel heater option. There are no additional lines to route, cut, or install, mounting in the factory location and mating directly to all factory fuel lines and WIF sensor circuitry. The Donaldson filter offers improved efficiency at low micron levels, while enduring peak water separation. Select the Fleece assembly designed for your vehicle.
Not Yet Reviewed
$379.00
$322.15
On Sale
When it comes to converting to EFI, it's important for the fuel pump to be installed in a cool area and what better place than in the gas tank itself. The pump is cooled by the fuel, it's quieter plus there's no chance of fuel starvation. To help ease the installation of an in-tank pump, we offer a new Go Fuel In-Tank Module assembly. This universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. The cut-to-fit bracket secures a 340 LPH pump capable of providing fuel to 600 horsepower engines. To ensure clean fuel is pulled into the pump, two size of sock/filters are provided, a standard 11 square-inch design as well as a large, 35 square-inch version. Go Fuel in-tank modules are a direct fit into fuel tanks offered by TANKS Inc.
( 26 )
$298.00
—
$532.00
$268.20
—
$478.80
On Sale
Edelbrock Victor Jr. EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds are designed to replace the stock mono blade throttle bodies and give you throttle body options; fuel rail set, fuel injectors, fuel pump, and regulator are all required (each sold separately). If you decide not to maintain your EFI setup, you can also use these Victor Jr. EFI intake manifolds to convert to a carburetor.
( 10 )
$562.95
—
$605.95
$484.76
—
$506.66
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$287.95
—
$349.95
$259.15
—
$314.95
On Sale
Holley diecast in-tank retrofit fuel pump modules are quick and easy ways to convert your factory tank or fuel cell into an EFI in-tank fuel system, while also adding the benefits of a Holley HydraMat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a diecast pump hanger bracket to control pump vibration, while also providing a low-profile design to fit where space is at a premium. Holley's innovative clamping system and integrated fuel pump makes it a simple install. Interested in an EFI retrofit kit, but can't get past the complicated fuel system? Holley diecast in-tank retrofit fuel pump modules are your solution. They're available in various flow rates, as well as return and returnless versions. Features include: * Installs in any fuel tank from 6.5 in. to 12 in. deep (depending on kit) to fit a wide variety of applications * The low-profile design is only 1.275 in. above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit * The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride * Includes innovative Holley HydraMat to ensure consistent fuel supply. The 3 in. x 15 in. HydraMat mounting flange has six clocking pin locations to allow for 360 degrees of adjustment to clear sending unit levels or any tank floor restrictions that you might encounter * Diecast aluminum construction for corrosion resistance and long-lasting good looks * 1/4 in. NPT ports for a wide variety of plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Two different fuel pumps are available—255 lph or 400 lph for both return and returnless-style systems
( 13 )
$399.95
—
$777.95
$359.95
—
$505.95
On Sale
AEM 22-channel CAN sensor modules provide a way for users with carbureted vehicles to add an AEM CD digital dash display. They also let users with existing CAN-based devices add more channels to the display for viewing and/or data logging. These 22-channel modules convert analog, digital, and frequency inputs into an AEMnet CAN bus signal that can be transmitted to AEM's CD-5 carbon and CD-7 digital dashes. AEM Electronics 22-channel CAN sensor module includes: * Wiring harness with 36 in. flying leads and pre-wired CAN cable * IP65-rated enclosure is dust-tight and water-resistant * Daisy-chain two modules together for additional channels (modules sold individually) * Four dedicated 0-5 V analog inputs * Four temperature (thermistor) inputs * Four user-configurable inputs for 0-5 V, temp (including RTD) * One dedicated fuel level input (0 to 250 ohm range) * Six digital inputs, active low, protected to about 18 V, frequency, duty cycle or simple switch * One tach input, trigger when low, 12 V internal pull up * Two VR pair frequency inputs (crank, wheel, or driveshaft speeds) * Jumper selectable CAN bus speeds, 250k, 500k, 1M * Jumper selectable terminating resistor * Jumper selectable header length, 11 bit or 29 bit
Not Yet Reviewed
$413.95
$371.95
On Sale
B&M Transkits give you the same high-quality components that are used in all B&M Street and Strip transmissions. They include high performance friction materials, a complete overhaul gasket set, a drain plug kit, and all of the parts necessary to convert your valve body into a full manual/automatic valve body. These improvements enhance shift feel, while retaining full automatic features. The Transkits come complete with full instructions on how to assemble your transmission to B&M specifications (except BMM-70232 and BMM-70233). They also include special directions on how to modify your case, pump, and components.
( 44 )
$449.95
—
$499.95
$403.95
—
$448.95
On Sale
Scott Drake's V6 to V8 conversion kits include everything you need in one kit to help you to convert your 6-cylinder steering system on your Mustang to the stronger V8 manual steering system. Along with Scott Drake spindles, these conversion kits include the center link, tie rods, adjusting sleeves, pitman arm, idler arm and idler arm bracket. Bring your V6 equipped Mustang up to the Mustang GT specs using these convenient conversion kits—your classic Mustang will be much more fun to drive!
Not Yet Reviewed
$463.95
$416.95
On Sale
Stifflers Suspension Mustang FIT (Fully Integrated Technology) systems offer a proven way to keep your Mustang's muscles fit! The FIT system integrates the front and rear subframes and ties them into the rocker panels to form a triangulated web of strength and stiffness that helps keep your car in shape for improved handling, launches, and ride quality. The strong steel stiffeners beef up your Mustang for an increased range of suspension tuning and overall performance. Twisting and bending is good conditioning for humans--not vehicles. The best exercise for your Mustang is Stifflers FIT system. Stifflers Mustang Fit System benefits include: * Transfers more power to the ground, not wasting it twisting and bending the chassis * Launches straighter * Stiffer chassis reduces or eliminates interior rattles and extends the life of the vehicle * Weld locations are free of powdercoat--no removal of powdercoat required before installation * Non-intrusive design; no floors to cut, interior to remove, or lines to relocate * Tube ends are sealed to keep out moisture * Ground clearance remains unchanged * Increases side impact safety * Can be used with factory convertible braces with only slight modifications
( 3 )
$354.95
—
$569.95
$319.46
—
$512.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
