Availability
On Sale
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 57 )
$2,592.95
—
$3,478.95
$2,292.95
—
$2,978.95
On Sale
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 144 )
$2,491.95
—
$4,996.95
$2,191.95
—
$4,496.95
On Sale
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 31 )
$4,185.95
—
$4,976.95
$3,685.95
—
$4,476.95
On Sale
TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!
( 31 )
$2,668.95
—
$3,830.95
$2,368.95
—
$3,330.95
On Sale
For hauling heavy loads or for taking a trip across the country, TCI heavy-duty RV transmissions were designed with you in mind. They're built for strength, and they'll provide long, dependable service, as well as delivering maximum fuel economy. They have special valve-body modifications that increase fluid flow and improve shift characteristics, without the harsh feel of racing transmissions; and they include a low-gear package for pulling heavy loads.
( 3 )
$3,028.95
—
$4,127.95
$2,528.95
—
$3,627.95
On Sale
The economical TCI Street Rodder transmission is ideal for small block powered vehicles, producing up to 400 hp—perfect for a mild daily driver or street rod. Equipped with a TCI automatic valve body and valve body improver kit, the Street Rodder allows you to achieve a firmer, yet not too harsh shift in the vehicle while remaining fully automatic.
( 5 )
$3,495.95
$2,995.95
On Sale
Ranger DST30P wheel balancers are efficient, extremely accurate, and are built with a narrower chassis—a perfect fit for smaller garages and shops. These hybrid designs feature a magnetic transducer encoder with twice as many teeth as Ranger's larger model, taking the count from 32 to 64. As a result, they double the number of possible weight placements, meaning more accuracy and better balancing in a space-conscious, cost-effective wheel balancer. Features include: * Direct-Axis drive system keeps balancer running smoothly over time * Digital Sensor Technology--16-digit digital sensor processor and single-chip technology for better speed and accuracy in your readings * Multi-directional quartz piezoelectric load sensors * 64-tooth encoder improves automatic weight optimization * Full-tilt LED display panel * Dynamic, static, and multiple alloy balancing modes are standard * Dual plane calibration for all OEM configurations and performance wheels * Top positioning weight locator * Inside and outside measuring * Millimeter/inches selection * Ounce/gram selection * Manual wheel offset distance setting * Self-calibration function * Auto start when hood is lowered * Wheel holding manual brake pedal * Truck cone/spacer ring adapter set * Wheel calipers * Rear cone mount spring * No-mar rear cone mount pressure cup * Quick-release and mount hub nut
Not Yet Reviewed
$3,595.00
$3,295.00
On Sale
RSO Suspension Stage 2.0 lift kits for the Toyota 4Runner are the best option for budget-minded off-roaders looking to enhance the performance of their trail vehicle. They're constructed with the highest quality materials to increase ground clearance and counteract heavier bumpers and gear. Aggressive damping performance is achieved via large 2.5 in. adjustable remote reservoir coilovers and shocks to help your 4Runner take on any obstacle. The steel tubular front upper control arms are stronger than the factory arms and provide more articulation, stability, and handling performance. New rear coil springs lift the rear, and the optimized spring rates improve comfort on the trails while carrying all your gear. Precision-machined materials with industry-leading coatings ensure long life and corrosion-free performance on any terrain. Includes: * Front 2.5 in. remote reservoir coilover shocks * Rear 2.5 in. remote reservoir shocks * Front upper tubular control arms * Rear springs black Notes : * Lift Height: 2-3 in. * Position: Front and rear
Not Yet Reviewed
$2,731.99
$2,595.39
On Sale
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 102 )
$3,949.95
—
$3,999.95
$2,172.95
—
$2,199.95
On Sale
aFe BladeRunner GT Series intercoolers feature a bar and plate core design that outflows stock intercoolers by increasing heat dissipation over the much smaller tube and fin design used by the OEM. The unique BladeRunner end tanks are constructed out of 3/16 in. aluminum plates that incorporate seven Multi-Directional Vanes (MDV) throughout the intercooler. This aFe technology is used to direct hot air flow through the entire intercooler core, which allows for greater cooling. aFe BladeRunner GT Series intercoolers are100 percent TIG-welded by certified craftsmen for race-quality strength and durability. They are pressure tested at 200 psi.
( 5 )
$2,300.55
$2,128.01
On Sale
MBRP Armor Pro Series exhaust systems are designed and built for the most serious enthusiast who will settle for nothing less than top of the line. Optimized durability is provided by the mandrel bent T304 stainless steel construction, additional benefits of this material are its ability to be easily cleaned while withstanding extreme conditions, on or off the road. All of the tubing is mandrel bent for maximum exhaust flow and mandrel bending ensures no rippling in the bends. The end result is that these exhaust systems give you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. In addition, these exhaust systems bolt to the OEM exhaust hangers and includes all necessary hardware to complete the installation.
( 4 )
$2,309.99
$2,059.99
On Sale
Maximize your diesel truck's performance and pulling power with aFe BladeRunner turbochargers. The turbochargers are optimized for maximum boost response, as well as overall power. The compressor housings are made of premium cast aluminum and feature a ported shroud design that eliminates dangerous compressor surge. Each of these turbochargers feature specifically designed trims that are aimed at maximizing power and throttle response for your given power goal. For maximum boost response and the ultimate torque delivery, aFe BladeRunner turbochargers will help you get there. Order the model that is best suited to your application needs.
Not Yet Reviewed
$2,494.80
—
$3,185.70
$2,307.69
—
$2,946.77
On Sale
RSO Suspension Stage 1.0 lift kits for the Toyota 4Runner are the premier entry-level kit for the off-roader looking to lift their vehicle and get it trail-ready. They're constructed with the highest quality materials to increase ground clearance and counteract heavier bumpers and gear. Aggressive damping performance is achieved via large 2.5 in. adjustable remote reservoir coilovers and shocks to help your 4Runner take on any obstacle. New rear coil springs lift the rear, and the optimized spring rates improve comfort on the trails while carrying all your gear. Specially chosen components offer easy installation while addressing weak points in factory suspension, enhancing articulation, stability, and handling performance. Precision-machined materials with industry-leading coatings ensure long life and corrosion-free performance on any terrain. Includes: * Front 2.5 in. remote reservoir coilover shocks * Rear 2.5 in. remote reservoir shocks * Rear springs black Notes: Lift Height: 2-3 in. Position: Front and rear
Not Yet Reviewed
$2,467.97
$2,147.13
On Sale
Summit Racing™ turbocharger replacement kits are engineered packages with upgraded components needed to replace your high-mileage stock turbos. These one-click kits give you what you need to do the job correctly and address some of the shortcomings of the factory system. Check out the features below: * Brand new direct-fit turbos * Cast stainless exhaust manifolds improved flow and durability * Inconel manifold studs and stainless hardware kit * MLS stainless gaskets * Improved coolant line kits
Not Yet Reviewed
$2,441.92
$2,341.92
On Sale
GM's Powerglide is one of the longest-used and most common automatics on the drag-racing scene today. They are true workhorses; and TCI has a wide variety available to pick from, making it easy to find just what you need. Many are built up from standard Powerglide cases, while others are available with stronger, tougher Reid Racing cases.
( 4 )
$2,550.95
$2,250.95
On Sale
Control Sway-A-Way bypass shocks by aFe feature nickel-flashed, zinc plated steel cylinder bodies with clearcoat for exceptional corrosion resistance. They also feature specifically-formulated, fully-synthetic shock oil (7w) and a multi-seal carrier to ensure zero leakage. These position-sensitive bypass shocks have two compression tubes and one rebound tube which allow for almost any external tuning to deliver the ride quality that best suits your specific needs. Control Sway-A-Way bypass shocks by aFe feature: * Available with piggyback reservoirs for easy mounting, or remote reservoirs when space is limited * Red anodized, CNC-machined aluminum components made to the strictest tolerances * Nitrobrite steel shafts polished for long seal life and harder than standard chrome shafts
Not Yet Reviewed
$3,034.00
$2,806.45
On Sale
aFe Twisted Steel headers are constructed of 409 stainless steel tubing with thick, CNC-machined flanges to ensure a leak-free seal. They incorporate a merge collector design, reducing the turbulence that occurs when using the traditional form collector-style designs. The performance gains are obvious when coupled with a high-flow Y-pipe. The aFe headers feature a tuned length primary that is out-flowing the stock manifolds by as much as 46 percent. Order the style and configuration tailored to your vehicle and engine application.
( 20 )
$2,376.00
—
$3,185.70
$2,197.80
—
$2,946.77
On Sale
aFe Mach Force XP exhaust systems are constructed of mandrel-bent stainless steel and come complete with free-flowing muffler(s), OE-style bayonet hangers, flanges, and band clamps, plus all hardware necessary for a hassle-free installation. Offered in single, dual, or quad muffler configurations, their smooth curves and large diameter tubes help reduce restriction and keep exhaust gas flowing smoothly for increased horsepower and torque. Available in cat-back, axle-back, and downpipe-back designs, almost all Mach Force XP exhausts are direct bolt-on systems that require no cutting or drilling and include all necessary hardware for a hassle-free installation. Most also include wrinkle-black powdercoated or polished 304 stainless steel tip(s) with a laser-cut stainless steel aFe power badge. Select models have carbon fiber tips with CNC-machined laser-etched inserts. aFe Mach Force XP exhaust systems are an ideal combination of performance, fit, and value. Additional features include: * Fit a variety of light trucks and cars, including European models * Available with 409 or 304 stainless tubing (varies by model) * "Stepped design" models increase exhaust velocity creating a broader torque curve throughout the rpm range * Straight-through, free-flowing stainless steel mufflers absorb high-pitch tones producing powerful sound * Leak-free 360-degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Several versions convert OE single exhaust to dual exhausts * Where applicable, incorporates an exhaust valve that uses the OE exhaust valve motor (not included) to regulate exhaust flow * Some systems use a unique resonance chamber to replace the OE muffler; produces a weight savings of up to 15 lbs. * Hi-Tuck design of specific models provide extra ground clearance when using an aftermarket suspension kit Note: Some aFe Mach Force XP systems are "Race Only" products solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
( 36 )
$2,238.60
—
$5,830.65
$2,014.74
—
$5,247.58
On Sale
aFe Takeda exhaust systems are constructed of superior quality mandrel-bent 304 stainless steel and are designed to produce significant horsepower gains. They utilize single and dual, high-flow transverse mufflers. Some models include an X-pipe balance tube, which equalizes and evenly distributes exhaust pulses for increased flow and performance across the power band, while maintaining great sound. The finishing touches on these exhaust systems are their laser-etched, slash-cut polished 304 stainless steel tips. Many options are available, such as cat-back and rear axle-back styles; exit quantity and location; and tailpipe diameters. Order the kit designed for your vehicle application.
( 17 )
$2,238.60
—
$3,792.60
$2,014.74
—
$3,413.34
On Sale
aFe Vulcan Series exhaust systems are constructed with mandrel-bent stainless steel tubing for improved exhaust flow. Utilizing factory mounting locations, their bayonet tip hangers ensure Vulcan Series exhausts have an OE-style fit and stay put under any driving conditions. A certified craftsman MIG welds each system by hand for durability and longevity. High-quality band clamps and hardware provide a quick, hassle-free installation, with most applications requiring no modifications. Vulcan Series exhausts fit a variety of light trucks and Jeeps, including some with diesel engines. They're constructed of 304 stainless steel and include black or polished 304 stainless steel tips with a laser-cut stainless steel aFe power badge. Order the model with size specs and other options recommended for your vehicle.
( 2 )
$2,706.90
—
$3,272.85
$2,436.21
—
$2,945.56
On Sale
aFe Gemini XV Series exhaust systems produce power gains, aggressive sound, and awesome style. These cat-back systems are built from 3 in. mandrel-bent 304 stainless steel tubing and feature an electronically controlled exhaust cutout valve to quickly switch between mild and aggressive tones at the push of a button. Utilizing state-of-the-art computer-aided design technology, Gemini XV systems are designed for custom, high-tolerance factory fitment. They utilize factory-style hangers for a secure fit and hassle-free installation, and their construction offers race-proven strength and durability. aFe Gemini XV exhaust systems include two key fob remotes, control module, valve motor, and all necessary wiring. Additional features include: * Dual black or polished 304 stainless steel clamp-on exhaust tips * Tips feature an aFe POWER logo plate riveted on for a unique style * High-flow stainless steel muffler (finish may vary) * 100 percent MIG-welded for race-proven strength and durability * All necessary hardware is included
Not Yet Reviewed
$2,238.60
$2,014.74
On Sale
Tuff Country EZ-Ride suspension lift kits increase fender clearance and allow for larger tires, while their EZ-Ride technology maintains a great ride. All Tuff Country EZ-Ride lift kits are of the finest quality and are engineered for simple installation at an affordable price. Most kits bolt-on, require no cutting or drilling, and are available for a wide range of vehicles in a choice of lift heights. New shocks are not required on most installations. Features of Tuff Country EZ-Ride suspension lift kits, depending on the application, may include: * Spacers mounted above the OEM coil springs/struts * Rear add-a-leafs added to the existing leaf springs * Rear cast iron lift blocks mounted below the OE leaf springs * Re-indexed factory torsion bars--without "cranking up" * Control arms that retain proper suspension geometry * Control arms with PTFE-lined FK Uni-ball joints * Dropped pitman arm and/or track bar relocating bracket(s) for proper alignment * Extended radius arms to improve articulation * Replacement radius arms that eliminate the need to drop radius arms--with no loss of ground clearance * Axle pivot brackets with camber adjustment * Transfer case drop kit * Polyurethane spring bushings * PTFE pads in leaf springs to eliminate squeaking * Tapered, snub-rolled, and pre-set leaf springs * Application-specific hardware and U-bolts
( 73 )
$2,226.99
—
$2,952.99
$2,004.29
—
$2,657.69
On Sale
Tuff Country lift kits are designed to add additional height to your truck or SUV to increase fender clearance and allow for larger tires. Available in a wide variety of lift sizes and types, Tuff Country lift kits are trademarked with quality engineering and materials, affordable pricing, and simple installation finished with a great ride. Whether you are looking to lift a little or a lot, Tuff Country will give your vehicle the height and stance you've been wanting.
( 2 )
$2,282.99
—
$2,562.99
$2,054.69
—
$2,306.69
On Sale
Tuff Country EZ-Flex suspension lift kits include EZ-Ride leaf springs or coil springs that offer the ultimate in lifted spring ride quality, while remaining extremely durable for off-road situations. EZ-Flex control arms allow for increased articulation in extreme conditions.
( 3 )
$2,299.99
—
$2,995.99
$2,069.99
—
$2,696.39
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
