Availability
Showing In Stock Items. Show All 19 Items.
On Sale
If huge horsepower is what you're searching for, then AFR 345cc Magnum BBC cylinder heads will certainly deliver. They're recommended for radical street/strip, Pro Street, or racing applications on engines up to 572 cu. in. operating below 7,000 rpm—and are capable of flowing 400 cfm at 0.700 in. of lift. These A356 aluminum heads are designed for maximum horsepower and rpm capability, with an average primary operating range of 3,500-8,000 rpm; they also provide impressive torque figures. AFR recommends the use of .120 in. wall pushrods and full-roller rocker arms for strength. It's vital that you check clearance of all moving parts due to the vast array of rocker arms, lifters, cams, springs, etc. Don't forget to check pushrod-to-head clearance, as well as any potential interference from your rocker arms and spring assemblies prior to final engine assembly. AFR 345cc Magnum BBC cylinder heads come standard with AFR's trademark 3/4 in. thick cylinder head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.300 in. intake and 1.880 in. exhaust valves.
( 4 )
$4,050.90
$3,848.45
On Sale
Fleece Performance offers Cheetah FMW VNT turbochargers for a variety of diesel trucks to enhance your driving experience. These drop-in replacements come with a Fleece-engineered 63mm FMW compressor wheel and high-flow Cheetah turbine wheel. You'll enjoy the spool-up and throttle response of a small turbo and still get the big top-end power you're looking for. Rated at up to 650 rear wheel horsepower (depending on model), this is the ultimate combination for dual-purpose applications. If you're towing during the week and sled pulling on the weekend, the 63mm FMW VNT Cheetah is just the ticket. Order the turbo model recommended for your vehicle. Additional details: * Stock appearing: Uses the stock housings with updated internals. This allows you to keep all factory systems intact, yet enables you to safely run 40 psi of boost. No aftermarket components or modifications needed for installation. * Proven Technology: Built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings. * Powerful Yet Responsive: Turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end. * Exclusive FMW wheel technology: – Forged milled wheels – Faster spool-up – Increased throttle response – Broader torque curve
( 2 )
$2,599.00
—
$2,649.00
$2,209.15
—
$2,251.65
On Sale
Are you looking for big torque and horsepower numbers? AFR's 325cc Magnum big block Chevy line of medium-volume intake runners will provide you with exactly that. The phrase "having your cake and eating it too" would certainly be appropriate with their moderately sized intake runners producing tremendous flow figures across the entire lift range. These high-flow/high-velocity ports provide extreme versatility and fill the needs of many applications. From a max-effort high-compression 454 to a 605 c.i.d. low-rpm marine application, these aluminum cylinder heads would be a great choice. AFR Magnum heads would also be ideal in larger cubic inch Pro Street applications with their broad torque range, as well as their significant rpm and horsepower capabilities. These cylinder heads will work best with a primary operating range of 3,000-7,000 rpm (this range is an average and will vary with engine displacement as well as component selection). These 325cc heads come standard with AFR's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.300 in. intake and 1.880 in. exhaust valves. The standard combustion chamber volume is 119cc on these AFR's 325 "as-cast" pieces. The heads are available with an optional 114cc combustion chamber as well.
( 1 )
$3,754.80
$3,567.25
On Sale
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 119 )
$2,308.95
$2,078.06
On Sale
APR DTR8868 turbocharger systems are direct replacements for the EA839 3.0L turbo engine. These upgrades include matching software for various vehicles and mods, providing up to 620 hp (571 AWHP) and 422 lbs.-ft. of torque (572 AWT), depending on vehicle platform and fueling, all while keeping emissions components unmodified. The software supports premium pump fuel grades, race fuel grades, and even ethanol on the S4, S5, and SQ5 platforms with fueling upgrades. For dedicated race cars, the turbocharger is designed with plenty of headroom to go even further on your own. The APR Stage 3 software is designed to avoid hard-spiking in the lower RPM band or running on the edge of what the factory rods and pistons should handle. Particular attention was paid toward component protections for exhaust gas temperature (EGT), back pressure safety (EMAP), turbocharger discharge temperatures, and fueling system capabilities. As rising exhaust gas temperatures require more fuel, the system will lower lambda to cool EGT without taxing the injection system with excessive on-times. Secondary protections will limit output for safety. The HPFP software helps increase headroom without over-driving the pressure to the injection system. The need for limiting power under extreme prolonged use (like tracking the vehicle), is greatly reduced, and the optional upgraded HPFP dramatically increases ethanol output. Note: Specific software is required to use this system, and an upgrade from lower stage systems is included for various vehicles. Software compatibility must be checked before purchase as the software installs to your vehicle's factory ECU. Currently, software can only be installed by an authorized APR dealer. Software is available in two formats: for use with the stock HPFP or for use with the APR HPFP. Additional APR DTR8868 turbocharger systems features, items, and specifications include: * Does not require a core and no additional downtime * Designed to bolt to factory location with factory-style connections * German dual ceramic ball bearing center section eliminates failure-prone journal bearing design * Smooth and reliable operation with a better transient response * Upgraded compressor cover with matching A/R * Larger aircraft-grade, 6061 billet aluminum 88mm compressor wheel * Turbine housing cast with high-temperature 310 stainless steel * Turbine A/R matched to nickel-based super-alloy K418 high-flow 54mm turbine wheel * Each rotating group is VSR (vibration sort rig) balanced for reliable operation * Includes complete turbocharger with a calibrated wastegate actuator and diverter valve * All necessary single-install hardware, gaskets, and clamps * Intake system adapter provides maximum flow-through as optional upgrade for factory intake * ECU software upgrade designed for factory engine and remains emissions-compliant * Supports 91, 93, 100, and 104 AKII, and E60-E85 in North America * Supports 95, 98, 104, 108 RON, and E60-E85 everywhere else * Integrated DV (Diverter Valve) port with OEM DV included
Not Yet Reviewed
$3,299.95
$2,968.95
On Sale
AFR 280cc BBF Bullitt 14 degree cylinder heads are your shot to outgun the competition! They feature partially CNC-ported intakes, exhausts, and chambers, A356 aluminum castings, and high-quality components throughout with standard exhaust port locations. This clean-sheet redesign of their Bullitt cylinder heads deliver a decreased overall runner size, a more consistent cross-sectional area, carefully shaped combustion chambers, and repositioned valves to complement the intake and exhaust port design. Together they improve engine response, providing increases in horsepower and torque. The 280cc Bullitt heads are recommended for street, towing, or street/strip engines with displacements up to 477 cu. in., operating up to 6,200 rpm. Load your engine for performance with AFR Bullitts!
( 2 )
$2,979.90
$2,831.00
On Sale
Edelbrock E-CNC 355 cylinder heads afford you the ultimate in performance! E-CNC 355 heads are fully CNC-ported to make more horsepower and torque in your high performance street or entry-level race application. Edelbrock cylinder heads are made in America and come available either bare or assembled. Improved airflow and modified spark plug angles that increase fuel efficiency and maximize power are just part of the overall performance potential you'll experience with Edelbrock E-CNC 355 cylinder heads.
Not Yet Reviewed
$2,725.50
$2,180.40
On Sale
FAST XFI 2.0 engine control units deliver--fast! Utilizing the latest technology, FAST XFI 2.0 units can process, analyze, and adjust four times quicker than previous EFI systems. The C-Com XFI Windows-based software is easy to navigate and features field-flashable capabilities, so you can download the latest software updates via email or directly from FAST. These XFI control units also feature Qwik Tune for programming without a laptop. Pre-program up to four different EFI maps--optimize a setting for your daily driving, one for racing conditions, and still another for fuel economy. You'll enjoy on-board diagnostics, EZ Test indicator lights, 5-bar MAP sensing and controls, plus enhanced data-logging capabilities and memory. Some of the FAST XFI 2.0 engine control units' standard features include: * Built-in wideband O2 * Fully sequential and/or bank-to-bank capability * Individual cylinder correction * Fan and fuel pump control * Dynamic scaling of vectors in 2D and 3D tables * Torque converter lockup control * Air conditioning wide-open throttle cutout * Boost control * Fuel and oil pressure logging * Adjustable injector timing * Multiple ignition strategies
( 1 )
$2,421.95
$2,179.76
On Sale
B&M remanufactured Street and Strip transmissions are put together with new gaskets, bushings, seals, thrust washers, high performance friction materials, and gold zinc plated hardware. The front pump is rebuilt to B&M specs and the valve body is recalibrated. They're built for extreme conditions and are perfect replacing a worn transmission, cruising, and racing.
( 13 )
$3,749.95
—
$4,049.95
$3,373.95
—
$3,643.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
