Free Shipping on Orders Over $109 at Summit Racing

On Sale

FiTech Go EFI 8 PA 1200 HP System Dual Pump/HP Regulator/Go-Spark Fuel Injection Master Kits

When you are getting serious about 4-digit horsepower under your hood with boost or nitrous, Go EFI 8 Power Adder 1,200 hp systems are up to the task. And, with FiTech's master kits you also get a high-pressure fuel delivery solution to take your setup from conventional to EFI. FiTech Go EFI 8 PA 1,200 hp system Dual Pump/HP regulator/Go-Spark fuel injection master kits pair powerful components designed to support serious horsepower, plus precise fuel pressure and an upgrade to high-powered sparks for improved combustion and power output. Go EFI 8 Power Adder bolt-on throttle body features eight high-flow injectors capable of fueling up to 1,200 hp. It is supplied with FiTech's Pro-tuning software and features the ability to data-log information. To ensure the best atomization of the fuel injection, the annular discharge design is increased to 20 jet streams to support the fuel volume required under boost, and has a built-in 2.5 BAR MAP sensor to handle the increased boost pressures, along with built-in timing controls based on boost or a nitrous input. The throttle body system includes handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info. Go Fuel dual fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. Go Fuel High Horsepower regulator will support 2,000 hp. Adjustable from 30 to 70 psi, this larger, dual output model is crafted from billet aluminum and features -6 ORB ports along with a vacuum/boost port. It will accept a gauge. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors.

Not Yet Reviewed

$2,395.99

$2,156.39

On Sale

FiTech Ultimate LS EFI 1,000 HP Fuel Injection Systems with Go Fuel In-Tank Module

FiTech offers Ultimate LS EFI 1,000 hp fuel injection systems with Go Fuel in-tank module and regulator master kit. The forced induction/nitrous oxide power adders feature multi-port injection. They're available in a variety of styles, with or without transmission control—such as LS1, LS3, and LS7 short intake manifold; and LS1 long runner intake manifold. Order the model best suited for your application.

Not Yet Reviewed

$2,527.99

—

$2,949.99

$2,275.19

—

$2,654.99

On Sale

FiTech Ultimate LS EFI 500 HP Fuel Injection Systems with Go Fuel In-Tank Module

FiTech Ultimate LS EFI 500 hp fuel injection systems with Go Fuel in-tank module combines incredible engineering and construction for top-of-the-line performance. FiTech fabricated many billet aluminum parts for their Ultimate LS EFI 500 hp systems, including a 92mm throttle body, high-volume fuel rails, and a 1,500 to 6,500 rpm powerband intake manifold. They combine sequential spark and fuel control with 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touch screen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. The Go Fuel in-tank module universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Whether you're starting with a 5.3 junkyard dog or a crate motor, FiTech Ultimate LS EFI 500 hp systems with Go Fuel in-tank module will look and run exceptionally. Additional Ultimate LS features: * Optional GM transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touch screen hand-held controller with data log features * Suction cup mounting bracket

5.0 out of 5 stars ( 1 )

$2,375.99

—

$2,396.99

$2,138.39

—

$2,157.29

On Sale

Holley HP EFI Universal Retrofit Engine Management Systems

Progammable EFI has been simplified! Holley HP EFI universal retrofit engine management kits make it easy to install multi-point fuel injection on your Mopar, Ford, or other type engine. Holley Performance universal retrofits are designed for 4150 and 4500 carburetor-style intakes. HP kits include injector bungs and un-machined fuel rails, so you can modify them to fit any single plane 4-barrel intake manifold. You'll also receive all necessary wiring, ECU, sensors, and a throttle body. Retrofit your engine for maximum performance with complete tunability via your laptop, or opt for self-tuning capabilities and rest assured that your fuel curves are accurate. It's a new era in fuel injection and it comes with a very appealing price tag, compliments of Holley and HP EFI universal retrofit engine management systems.

Not Yet Reviewed

$3,749.95

$3,373.95

On Sale

FiTech Ultimate LS EFI 750 HP Fuel Injection Systems with Go Fuel In-Tank Module

FiTech Ultimate LS EFI 750 hp fuel injection systems with Go Fuel in-tank module combines incredible engineering and construction for top-of-the-line performance. FiTech fabricated many billet aluminum parts for their Ultimate LS EFI 750 hp systems, including a 102mm throttle body, high-volume fuel rails, and a 1,500 to 6,500 rpm powerband intake manifold. They combine sequential spark and fuel control with 55 lbs./hr. injectors, a plug-and-play wiring harness, and a color touch screen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. The Go Fuel in-tank module universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Additional Ultimate LS features: * Optional GM transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touch screen hand-held controller with data log features * Suction cup mounting bracket

5.0 out of 5 stars ( 1 )

$2,396.99

—

$2,684.99

$2,157.29

—

$2,416.49

On Sale

Holley Terminator X Stealth 4150 2X4 EFI Fuel Injection Systems

Holley Terminator X Stealth 4150 2x4 EFI systems feature eight 100 lb./hr. fuel injectors capable of supporting up to 1500 hp naturally aspirated or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower. Features: * Bolt-on 2x4 4150 flange carburetor replacement * Internal 1bar MAP sensor, built into the Terminator X ECU External fuel pressure regulator required, set to a base pressure of 58.5 psi * Integrated ignition timing control * High-resolution, full color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard--answer a few questions about your engine, and it creates the base map, then starts tuning on its own without the use of a laptop * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and Fuel Pressure regulator, for years of dependable service * Weld-in oxygen sensor bung for the exhaust ensures a leak-free oxygen sensor install * Plug-and-play with Holley EFI accessories * Available in three finishes: Shiny, Black, and Gold

1.0 out of 5 stars ( 1 )

$3,149.95

$2,833.95

On Sale

FiTech Go EFI 2x4 PA 1200 HP Fuel Injection Systems

FiTech Go EFI 2x4 Power Adder 1200 hp fuel injection systems are for the guys who have 671 and 871 roots superchargers or make up to 1200 hp naturally aspirated on their dual-quad setup. These easy self-tuning systems work out of the box on your 2x4 blower plate as an inline setup or can be side mounted using custom linkages. Also, the kits are a bolt-on for the most popular normally aspirated dual-quad and tunnel ram manifolds, including the Edelbrock line of dual-quad manifolds, without any adapters! They fit and look like they belong there because they were designed to fit from the start. One throttle body handles all of the brains, while the second holds four additional injectors. These can also be used in cross ram and tunnel ram configurations. Application notes: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, etc. engines making 250 hp up to 1200 hp with a dual quad intake manifold. Replacement for any dual-quad carburetors for engines with 250 hp up to 1200 hp. Use the same size air cleaner you would normally use for your dual-quad carburetors. Product features: * 2.5 BAR internal MAP sensor * Suitable for up to 1200 hp * (8) Flow matched injectors * (2) Fan control * Blower and turbo ready * Support for nitrous * Boost and nitrous timing * Ignition timing control * Built-in pressure regulator * Air/fuel ratio tuning * Pro-tuning laptop software * Bright aluminum or matte black finish * NOTE: Some models include Go Spark CDI box Kit contents: (2) Diecast throttle body (1) Oxygen bung kit (1) Hand-held controller (1) CTS sensor (1) Hand-held controller cable (1) CTS adapter (1) Windshield mount (1) Mini USB cable (1) 4+2-Pin Connector (2) Return plug (1) Oxygen sensor (1) Gasket kit

3.91 out of 5 stars ( 11 )

$2,236.00

—

$2,347.99

$2,012.40

—

$2,113.19

On Sale

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$2,249.95

$2,023.95

On Sale

FiTech Ultimate LS 750 HP EFI Short LS7 Port Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 750 hp EFI short LS7 port intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 750 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 55 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 340 or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.

Not Yet Reviewed

$2,293.99

—

$2,745.99

$2,064.59

—

$2,471.39

On Sale

FiTech Ultimate LS 1,000 HP EFI Short Cathedral Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Designed as a complete induction and EFI system for your LS engine and available with or without transmission control, FiTech offers several master kits supplied with fuel delivery systems, as well as their Go Spark LS3 performance coils to support 500, 750, or 1,000 hp. FiTech Ultimate LS 1,000 hp EFI short cathedral intake fuel injection master kits package either a 440 lph in-tank pump for tanks with a depth of 6 to 15 in. or an in-tank dual pump module (two 340 lph pumps) that is ideal for fuel cells or custom tanks. Along with the fuel delivery, kits also contain a Go Fuel regulator—Tight Fit with gauge that supports up to 1,000 hp or FiTech's High Horsepower with gauge that supports up to 2,000 hp. Both are crafted from billet aluminum and feature -6 ORB ports and a vacuum/boost port. Completing these kits is your choice of FiTech Go-Spark LS coil packs to provide a fresh jolt of energy. Available with or without a built-in LED that flashes when the coils fire, the coils bolt-in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade, delivering optimum output with a quality fit and reliability. Select the FiTech Ultimate LS 1000 kit for your engine with the options you prefer. FiTech Ultimate LS 1,000 hp kits feature: * Intake manifold will fit cathedral port LS1/LS2/LS6 heads * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 80 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions

Not Yet Reviewed

$2,846.99

—

$3,572.99

$2,562.29

—

$3,215.69

On Sale

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.0 out of 5 stars ( 2 )

$2,249.95

$2,023.95

On Sale

aFe Mach Force XP Exhaust Systems

aFe Mach Force XP exhaust systems are constructed of mandrel-bent stainless steel and come complete with free-flowing muffler(s), OE-style bayonet hangers, flanges, and band clamps, plus all hardware necessary for a hassle-free installation. Offered in single, dual, or quad muffler configurations, their smooth curves and large diameter tubes help reduce restriction and keep exhaust gas flowing smoothly for increased horsepower and torque. Available in cat-back, axle-back, and downpipe-back designs, almost all Mach Force XP exhausts are direct bolt-on systems that require no cutting or drilling and include all necessary hardware for a hassle-free installation. Most also include wrinkle-black powdercoated or polished 304 stainless steel tip(s) with a laser-cut stainless steel aFe power badge. Select models have carbon fiber tips with CNC-machined laser-etched inserts. aFe Mach Force XP exhaust systems are an ideal combination of performance, fit, and value. Additional features include: * Fit a variety of light trucks and cars, including European models * Available with 409 or 304 stainless tubing (varies by model) * "Stepped design" models increase exhaust velocity creating a broader torque curve throughout the rpm range * Straight-through, free-flowing stainless steel mufflers absorb high-pitch tones producing powerful sound * Leak-free 360-degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Several versions convert OE single exhaust to dual exhausts * Where applicable, incorporates an exhaust valve that uses the OE exhaust valve motor (not included) to regulate exhaust flow * Some systems use a unique resonance chamber to replace the OE muffler; produces a weight savings of up to 15 lbs. * Hi-Tuck design of specific models provide extra ground clearance when using an aftermarket suspension kit Note: Some aFe Mach Force XP systems are "Race Only" products solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.

4.46 out of 5 stars ( 37 )

$2,238.00

—

$4,472.00

$2,014.20

—

$4,024.80

On Sale

FiTech Ultimate LS 1,000 HP EFI Short LS3 Port Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, FiTech Ultimate LS EFI master kits are supplied with options for fuel delivery systems, as well as their Go Fuel regulators and Go Spark LS3 performance coils. FiTech Ultimate LS 1,000 hp EFI short LS3 port intake fuel injection master kits package either a 440 lph in-tank pump for tanks with a depth of 6 to 15 in. or an in-tank dual pump module (two 340 lph pumps) that is ideal for fuel cells or custom tanks. Along with the fuel delivery, kits also contain a Go Fuel regulator—Tight Fit with gauge that supports up to 1,000 hp or a FiTech High Horsepower with gauge that supports up to 2,000 hp. Both are crafted from billet aluminum and feature -6 ORB ports and a vacuum/boost port. If you wish to add a fresh jolt of energy to your LS EFI swap, you can complete these kits with FiTech Go-Spark LS coil packs. Available with or without a built-in LED that flashes when the coils fire, the coils bolt-in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade, delivering optimum output with a quality fit and reliability. Select the FiTech Ultimate LS 1,000 hp kit for your engine with the options you prefer. FiTech Ultimate LS 1,000 intake manifold kit features: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 80 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions

Not Yet Reviewed

$2,846.99

—

$3,572.99

$2,562.29

—

$3,215.69

On Sale

FiTech Ultimate LS 500 HP EFI Short LS3 Port Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 500 hp EFI short LS3 port intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 500 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 92mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 36 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 255, 340, or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.

Not Yet Reviewed

$2,293.99

—

$2,745.99

$2,064.59

—

$2,471.39

On Sale

FiTech Ultimate LS 1,000 HP EFI Short LS7 Port Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, FiTech Ultimate LS EFI master kits are supplied with options for fuel delivery systems, as well as their Go Fuel regulators and Go Spark LS3 performance coils. FiTech Ultimate LS 1,000 hp EFI short LS7 port intake fuel injection master kits package either a 440 lph in-tank pump for tanks with a depth of 6 to 15 in. or an in-tank dual pump module (two 340 lph pumps) that is ideal for fuel cells or custom tanks. Along with the fuel delivery, kits also contain a Go Fuel regulator—Tight Fit with gauge that supports up to 1,000 hp or a FiTech High Horsepower with gauge that supports up to 2,000 hp. Both are crafted from billet aluminum and feature -6 ORB ports and a vacuum/boost port. If you wish to add a fresh jolt of energy to your LS EFI swap, you can complete these kits with FiTech Go-Spark LS coil packs. Available with or without a built-in LED that flashes when the coils fire, the coils bolt-in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade, delivering optimum output with a quality fit and reliability. Select the FiTech Ultimate LS 1,000 hp kit for your engine with the options you prefer. FiTech Ultimate LS 1,000 hp intake manifold kit features: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 80 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions

Not Yet Reviewed

$2,846.99

—

$3,572.99

$2,562.29

—

$3,215.69

On Sale

FiTech Ultimate LS 750 HP EFI Short Cathedral Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 750 hp EFI short cathedral intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 750 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 55 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 340 or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.

Not Yet Reviewed

$2,293.99

—

$3,033.99

$2,064.59

—

$2,730.59

On Sale

FiTech Go EFI 3x2 Tri-Power 600 HP System/Go Spark Fuel Injection Master Kits

FiTech Go EFI 3x2 Tri-Power 600 hp system/Go Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. In these master kits, FiTech mates their Tri-Power systems with either a Go Fuel in-tank (regulated) or fuel cell single pump module to provide everything needed to convert your carbureted vehicle to EFI. Choose the master kit with your preferred fuel delivery solution. FiTech's Go EFI Tri-Power system is supplied with three 500 cfm throttle bodies and their self-learning EFI technology to provide the looks you want with the performance and drivability benefits that only fuel injection can deliver. Supporting up to 600 hp, the 3x2s are designed for a simple, ready-to-run installation. The compact ECU is easy to mount and only a few engine parameters are needed to get your hot rod engine fired up. The system includes three throttle bodies, remote ECU, handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: Go Fuel regulated in-tank pump modules are offered in different flow rates, and they include gaskets, terminals, and clamps. Go Fuel single fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware.

Not Yet Reviewed

$2,783.99

—

$2,894.99

$2,505.59

—

$2,605.49

On Sale

FiTech Ultimate LS 750 HP EFI Long Runner Cathedral Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 750 hp EFI long runner cathedral intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 750 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 55 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 340 or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.

Not Yet Reviewed

$2,293.99

—

$3,033.99

$2,064.59

—

$2,730.59

On Sale

FiTech Ultimate LS 750 HP EFI Short LS3 Port Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 750 hp EFI short LS3 port intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 750 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 55 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 340 or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.

Not Yet Reviewed

$2,293.99

—

$3,033.99

$2,064.59

—

$2,730.59

On Sale

FiTech Go EFI 8 PA 1200 HP System Dual Force/Go-Spark Fuel Injection Master Kits

When you are getting serious about 4-digit horsepower under your hood with boost or nitrous, Go EFI 8 Power Adder 1,200 hp systems are up to the task. And, with FiTech's master kits you also get a high-pressure fuel delivery solution to take your setup from conventional to EFI. FiTech Go EFI 8 PA 1,200 hp system Dual Force/Go-Spark fuel injection master kits pair two powerful components designed to support serious horsepower, plus an upgrade to high-powered sparks for improved combustion and power output. Go EFI 8 Power Adder bolt-on throttle body features eight high-flow injectors capable of fueling up to 1,200 hp. It is supplied with FiTech's Pro-tuning software and features the ability to data-log information. To ensure the best atomization of the fuel injection, the annular discharge design is increased to 20 jet streams to support the fuel volume required under boost, and has a built-in 2.5 BAR MAP sensor to handle the increased boost pressures, along with built-in timing controls based on boost or a nitrous input. The throttle body system includes handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info. Go Fuel Dual Force fuel system supports up to 1,600 hp. The dual-pump system works in concert with a mechanical or electric fuel pump to supply the Force Fuel reservoir with fuel where it is then fed through two internal 340 lph pumps to feed the EFI system. Dual internal regulators keep the pressure at 58 psi which is ideal for reliable EFI performance. The assembly holds a 1/2 gallon of fuel to submerge the efficient pumps with no chance of fuel starvation. A strong, versatile mounting bracket is included for easy mounting under the hood. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors.

Not Yet Reviewed

$2,247.99

$2,023.19

On Sale

FiTech Go EFI 3x2 Tri-Power 600 HP System Force Fuel Injection Master Kits

FTtech offers Go EFI 3x2 Tri Power 600 hp fuel injection systems with Force Fuel master delivery kit—or with Force Fuel mini delivery master kit. Choose the system and options that are best suited for your application. Go EFI systems are perfect for your everyday driver, right up to your weekend street machine or bracket racer. They feature the fastest, most accurate self-learning available, timing control, wet flow annular discharge, and tons of additional features. Go EFI systems fit any 4-barrel intake manifold (including 4500 flange) and are the most self-contained and full-featured unit of this type. The ECU (computer) is mounted on the throttle body, which greatly simplifies installation. No hole in your firewall and no unsightly harness draped across your engine! They are also the only computer-mounted throttle bodies that offer spark control without the need for an external spark box or special distributor. Other features include a built-in fuel pressure regulator and hand-held controller with touch screen for quick and easy initial set-up.

4.0 out of 5 stars ( 2 )

$2,683.99

$2,415.59

On Sale

FiTech Ultimate LS Truck EFI 750 HP Fuel Injection Systems with Hy-Fuel

FiTech Ultimate LS Truck EFI 750 HP fuel injection systems with Hy-Fuel thoroughly ease the process of adding fuel injection. They fabricated many billet aluminum parts for these systems, including a 102mm throttle body, high-volume fuel rails, and a 1,500 to 6,500 rpm powerband intake manifold. They combine sequential spark and fuel control with 66 lbs./hr. injectors, a plug-and-play wiring harness, and a color touch-screen, self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. Hy-Fuel in-tank modules can be run as either returnless or return-style by use of the 3-bar regulator or block-off. They feature a unique baffling system, making it easy for fuel to enter, but difficult to leave, even under hard corners, bumps, and moderate off-road adventures. They can be added to new or existing fuel tanks. For quick response and incredible abilities, install FiTech Ultimate LS Truck EFI 750 HP fuel injection systems with Hy-Fuel. Additional Hy-Fuel in-tank module features: * Can go from 14 in. deep pump to 6 in. by cutting tube * Available with 340 lph (89 gph) fuel pump supporting up to 800 hp * O-ring style 360 degree mounting flange for ease of maintenance * Excellent choice for racing, drifting, off-road, autocross, etc. * Billet aluminum construction with precision-machined components and -06 AN fittings * 35 sq. in. filter Additional EFI features: * Optional GM transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 inches of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touch-screen, hand-held controller with data log features * Suction cup mounting bracket

Not Yet Reviewed

$2,320.99

—

$2,608.99

$2,088.89

—

$2,348.09

On Sale

FiTech Ultimate LS 1,000 HP EFI Long Runner Cathedral Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Designed as a complete induction and EFI system for your LS engine and available with or without transmission control, FiTech offers several master kits supplied with fuel delivery systems, as well as their Go Spark LS3 performance coils to support 500, 750, or 1000 hp. FiTech Ultimate LS 1000 hp EFI long runner cathedral intake fuel injection master kits package either a 440 lph in-tank pump for tanks with a depth of 6 to 15 in. or an in-tank dual pump module (two 340 lph pumps) that is ideal for fuel cells or custom tanks. Along with the fuel delivery, kits also contain a Go Fuel regulator—Tight Fit with gauge that supports up to 1,000 hp or a FiTech High Horsepower with gauge that supports up to 2,000 hp. Both are crafted from billet aluminum and feature -6 ORB ports and a vacuum/boost port. If you wish to add a fresh jolt of energy to your LS EFI swap, you can complete these kits with FiTech Go-Spark LS coil packs. Available with or without a built-in LED that flashes when the coils fire, the coils bolt-in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade, delivering optimum output with a quality fit and reliability. Select the FiTech Ultimate LS 1000 kit for your engine with the options you prefer. FiTech Ultimate LS 1000 intake manifold kit features: * Intake manifold will fit cathedral port LS1/LS2/LS6 heads * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 80 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions

Not Yet Reviewed

$2,846.99

—

$3,572.99

$2,562.29

—

$3,215.69

On Sale

FiTech Ultimate LS 500 HP EFI Short LS7 Port Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 500 hp EFI short LS7 port intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 500 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 92mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 36 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 255, 340, or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.

Not Yet Reviewed

$2,293.99

—

$2,745.99

$2,064.59

—

$2,471.39

43 Results Found For "regulator"