Free Shipping on Orders Over $109 at Summit Racing

On Sale

All American Billet Silverline Series Serpentine Kits

All American Billet Silverline Series serpentine kits are designed to give any engine an aggressive black style, highlighted by machined finished areas for a truly standout look! These kits come standard with high performance accessories. Enjoy a no-hassle installation with all the hardware and necessary components included in the box. A variety of setups are available to fit models with or without power steering and air conditioning. Dozens of models are available; order the kit recommended for your vehicle and engine application.

4.43 out of 5 stars ( 7 )

$2,245.99

—

$3,055.99

$2,021.39

—

$2,750.39

On Sale

All American Billet Serpentine Kits

All American Billet serpentine kits are perfect for cleaning up your engine compartment and giving it a fresh look. These kits come standard with high performance accessories. If you need to replace your belt system or just want to show off to your friends these All American Billet serpentine kits will do just that! Installation is easy with all the hardware and necessary components included in the box. A variety of different setups are available to fit models with or without power steering and air conditioning.

4.0 out of 5 stars ( 16 )

$2,245.99

—

$3,235.99

$2,021.39

—

$2,912.39

On Sale

Holley VR Series Billet Fuel Pumps

Holley VR Series billet fuel pumps feature brushless pump technology and a twin-screw rotor design. These in-line fuel pumps are capable of high pressures and flows while maintaining a low amperage draw and quiet performance. They are designed to work on high-boosted race cars, endurance cars, and daily drivers. VR pumps will work with gasoline, methanol, and E-85 (compatible for methanol and E85 for competitive drag race use only- when draining and flushing after each race event). The VR1 and VR2 models are capable of a consistent 130 psi, can be fully submerged in the fuel cell or chassis mounted, and feature race-worthy billet aluminum construction for lasting durability and looks. Whether running 300 or 3,000 hp, Holley has a brushless pump for you. Features include: * Pumps can be run in one of two different speeds * Low speed control for low fuel consumption requirements * Full speed for high fuel consumption requirements * Proven for 18.5 V compatibility * Provide sufficient fuel flow for forced induction applications * Built for continuous duty if required * Dual-pump models are designed for endurance racing—use both or one can be a reserve pump * AN O-ring inlet/outlet * High flow and high pressure with low amperage draw * Maximum amp draw of 19 amps for VR1 and 38 amps for VR2 pumps * Not for use on aircraft of any type Note: These pumps are not designed to use standard conical seat-style unions in the inlets or outlets of the pumps. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as part # EAR-AT985010ERL.

5.0 out of 5 stars ( 1 )

$3,299.95

$2,968.95

Special Offer

On Sale

Flaming River 1957 Chevy Power Rack and Pinion Cradle Kits

Flaming River 1957 Chevy Power rack and pinion cradle kits engineered the popular rack and pinion cradle systems for Chevy vehicles. This true fixture welded mounting cradle fits between the frame rails and bolts in place using the original chassis location. No suspension modification is required and the system installs easily with hand tools. Full turning radius is engineered into the system.

Not Yet Reviewed

$2,913.99

$2,813.99

On Sale

BD Diesel Screamer Turbochargers

BD Diesel Screamer turbochargers may offer a stock drop-in installation and appearance, but they are anything but stock! They feature a larger ballistic billet compressor wheel and BD's exclusive turbine profile that results in reduced backpressure and increased turbine flow compared to the competition. You get more potential maximum power output, right up to 690 hp with performance modifications. Each turbocharger is high-speed balanced with the actuator stroke tested prior to shipping.

3.0 out of 5 stars ( 2 )

$2,274.95

—

$3,264.95

$2,047.46

—

$2,938.46

On Sale

FiTech Ultimate LS EFI 500 HP Fuel Injection Systems

FiTech has some of the best-engineered and priced throttle body systems on the market. Their LS EFI 500HP fuel injection systems bring incredible ingenuity to the market. FiTech fabricated many aluminum parts for these systems, including the low-profile 92mm billet throttle body, high-volume billet fuel rails, and an intake manifold with 1,500 to 6,500 rpm powerband and 3mm construction. Sequential spark and fuel control mates 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touchscreen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. A suction cup mounting bracket puts the controllers at your fingertips and allows for impressive visual aids. The optional transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 GM transmissions. FiTech LS EFI 500HP fuel injection systems with transmission controller provide impressive power and performance, while allowing you to save a little green for your next tires. Additional features: * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touchscreen hand-held controller with data log features

3.21 out of 5 stars ( 42 )

$2,283.99

—

$2,633.99

$2,055.59

—

$2,370.59

On Sale

FiTech Ultimate LS EFI 500 HP Fuel Injection Systems with Go Fuel In-Tank Module

FiTech Ultimate LS EFI 500 hp fuel injection systems with Go Fuel in-tank module combines incredible engineering and construction for top-of-the-line performance. FiTech fabricated many billet aluminum parts for their Ultimate LS EFI 500 hp systems, including a 92mm throttle body, high-volume fuel rails, and a 1,500 to 6,500 rpm powerband intake manifold. They combine sequential spark and fuel control with 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touch screen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. The Go Fuel in-tank module universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Whether you're starting with a 5.3 junkyard dog or a crate motor, FiTech Ultimate LS EFI 500 hp systems with Go Fuel in-tank module will look and run exceptionally. Additional Ultimate LS features: * Optional GM transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touch screen hand-held controller with data log features * Suction cup mounting bracket

5.0 out of 5 stars ( 1 )

$2,375.99

$2,138.39

On Sale

BD Diesel Screamer Turbocharger Manifold Packages

BD Diesel Screamer turbocharger/manifold packages look stock and install like stock, but is anything but stock! Screamer features a larger ballistic billet compressor wheel and BD's exclusive Low MOI QST turbine wheel, resulting in reduced backpressure, quicker response, increased efficiency, and increased turbine flow compared to the competition. The outcome is increased maximum potential power output, right up to 690 hp with supporting modifications. No extra parts to install, just drop-in and enjoy the extra power potential. BD's Screamer turbocharger is perfectly paired with a pulse manifold made from high-silicon ductile iron and designed to withstand extreme temperatures and vibration. Precision slip joints allow the manifold to expand and contract, which reduces cyclic thermal fatigue and greatly increases manifold longevity. Order the package designed for your truck. Key turbo features: * Ballistic Billet 64.5mm 7+7 blade compressor wheel and Low MOI QST 70mm 12 blade turbine wheel * QST turbine wheel has a 15 percent reduction in MOI (moment of inertia) which results in quicker turbo response * QST turbine blade thickness decreased by 25 percent allowing for higher turbine gas flow and increased efficiency * Each actuator is calibrated and tested prior to shipping * VSR high-speed balanced Manifold features: * Thick-wall casting resists high-heat cracking and leaks for long-term durability * Full EGR compatibility for easy fitment

Not Yet Reviewed

$3,766.95

$3,390.26

On Sale

FiTech Ultimate LS EFI 750 HP Fuel Injection Systems

LS motors have a great base for power, but what they really need is something wicked to wake them up. FiTech LS EFI 750 HP fuel injection systems have alarming power, exciting style, and will take you and your vehicle to the edge. FiTech fabricated many aluminum parts for these systems, including the low-profile 102mm billet throttle body, high-volume billet fuel rails, and an intake manifold with a 1,500 to 6,500 rpm powerband and 3mm construction. Sequential spark and fuel control mate the 55 lbs./hr. injectors, plug-and-play wiring harness, and color touch screen self-learning ECU. This allows you to program two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on-the-fly. A suction cup mounting bracket puts the controller at your fingertips and allows for impressive visual aids. The optional transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 GM transmissions. Awaken the beast and feed its needs with an ultra-performing FiTech LS EFI 750 HP fuel injection system with transmission controller. Additional features: * Programmable touch screen hand-held controller with data log features * 3-bar MAP sensor automatically detects up to 30 psi boost * AN fittings and fuel crossover * 24X and 58X crank and cam-compatible and works with custom cams * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Dual Bosch wideband with dual trim controlled * Knock sensor control * Stainless oxygen sensor bung * Compatible with car and truck coils * Designed for applications making at least 6 inches of vacuum at idle

3.9 out of 5 stars ( 20 )

$2,283.99

—

$2,639.99

$2,055.59

—

$2,375.99

On Sale

FiTech Ultimate LS 500 HP EFI Short LS7 Port Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 500 hp EFI short LS7 port intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 500 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 92mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 36 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 255, 340, or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.

Not Yet Reviewed

$2,293.99

—

$2,745.99

$2,064.59

—

$2,471.39

On Sale

FiTech Ultimate LS 1,000 HP EFI Short Cathedral Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Designed as a complete induction and EFI system for your LS engine and available with or without transmission control, FiTech offers several master kits supplied with fuel delivery systems, as well as their Go Spark LS3 performance coils to support 500, 750, or 1,000 hp. FiTech Ultimate LS 1,000 hp EFI short cathedral intake fuel injection master kits package either a 440 lph in-tank pump for tanks with a depth of 6 to 15 in. or an in-tank dual pump module (two 340 lph pumps) that is ideal for fuel cells or custom tanks. Along with the fuel delivery, kits also contain a Go Fuel regulator—Tight Fit with gauge that supports up to 1,000 hp or FiTech's High Horsepower with gauge that supports up to 2,000 hp. Both are crafted from billet aluminum and feature -6 ORB ports and a vacuum/boost port. Completing these kits is your choice of FiTech Go-Spark LS coil packs to provide a fresh jolt of energy. Available with or without a built-in LED that flashes when the coils fire, the coils bolt-in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade, delivering optimum output with a quality fit and reliability. Select the FiTech Ultimate LS 1000 kit for your engine with the options you prefer. FiTech Ultimate LS 1,000 hp kits feature: * Intake manifold will fit cathedral port LS1/LS2/LS6 heads * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 80 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions

Not Yet Reviewed

$3,119.99

—

$3,572.99

$2,807.99

—

$3,215.69

On Sale

FiTech Ultimate LS 1,000 HP EFI Short LS3 Port Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, FiTech Ultimate LS EFI master kits are supplied with options for fuel delivery systems, as well as their Go Fuel regulators and Go Spark LS3 performance coils. FiTech Ultimate LS 1,000 hp EFI short LS3 port intake fuel injection master kits package either a 440 lph in-tank pump for tanks with a depth of 6 to 15 in. or an in-tank dual pump module (two 340 lph pumps) that is ideal for fuel cells or custom tanks. Along with the fuel delivery, kits also contain a Go Fuel regulator—Tight Fit with gauge that supports up to 1,000 hp or a FiTech High Horsepower with gauge that supports up to 2,000 hp. Both are crafted from billet aluminum and feature -6 ORB ports and a vacuum/boost port. If you wish to add a fresh jolt of energy to your LS EFI swap, you can complete these kits with FiTech Go-Spark LS coil packs. Available with or without a built-in LED that flashes when the coils fire, the coils bolt-in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade, delivering optimum output with a quality fit and reliability. Select the FiTech Ultimate LS 1,000 hp kit for your engine with the options you prefer. FiTech Ultimate LS 1,000 intake manifold kit features: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 80 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions

Not Yet Reviewed

$3,119.99

—

$3,572.99

$2,807.99

—

$3,215.69

On Sale

FiTech Ultimate LS EFI 500 HP Fuel Injection Systems with Force Fuel

FiTech Ultimate LS EFI 500 hp fuel injection systems with Force Fuel combines incredible engineering and construction for top-of-the-line performance. FiTech fabricated many billet aluminum parts for their Ultimate LS EFI 500 hp systems, including a 92mm throttle body, high-volume fuel rails, and a 1,500 to 6,500 rpm powerband intake manifold. They combine sequential spark and fuel control with 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touch screen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. Force Fuel sump kits use your stock low-pressure manual or EFI pump to feed their sump tank. The pump is submerged in fuel for cooler and quieter running, and delivers 58 psi of high-pressure fuel to the throttle body at a rate of up to 340 lph (89 gph). For excellent performance and overall ease of operation, buy FiTech Ultimate LS EFI 500 HP fuel injection systems with Force Fuel sump system. Additional Force Fuel sump system features: * Low fuel level in the fuel tank will not result in pump starvation when vehicle is on a steep incline * Generally mounted in the engine compartment, but can be attached to the vehicle's chassis. * Supplied high-pressure hose includes 5 ft. of high-quality EFI -06 fuel line and fittings for plumbing from the Fuel Command Center 2.0 to the EFI throttle body Additional Ultimate LS features: * Optional GM transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 inches of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touch screen hand-held controller with data log features * Suction cup mounting bracket

Not Yet Reviewed

$2,256.99

—

$2,457.99

$2,031.29

—

$2,212.19

On Sale

FiTech Ultimate LS 500 HP EFI Short Cathedral Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 500 hp EFI short cathedral intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 500 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 92mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 36 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 255, 340, or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.

Not Yet Reviewed

$2,293.99

—

$2,745.99

$2,064.59

—

$2,471.39

On Sale

FiTech Go EFI 3x2 Tri-Power 600 HP System/Go Spark Fuel Injection Master Kits

FiTech Go EFI 3x2 Tri-Power 600 hp system/Go Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. In these master kits, FiTech mates their Tri-Power systems with either a Go Fuel in-tank (regulated) or fuel cell single pump module to provide everything needed to convert your carbureted vehicle to EFI. Choose the master kit with your preferred fuel delivery solution. FiTech's Go EFI Tri-Power system is supplied with three 500 cfm throttle bodies and their self-learning EFI technology to provide the looks you want with the performance and drivability benefits that only fuel injection can deliver. Supporting up to 600 hp, the 3x2s are designed for a simple, ready-to-run installation. The compact ECU is easy to mount and only a few engine parameters are needed to get your hot rod engine fired up. The system includes three throttle bodies, remote ECU, handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: Go Fuel regulated in-tank pump modules are offered in different flow rates, and they include gaskets, terminals, and clamps. Go Fuel single fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware.

Not Yet Reviewed

$2,783.99

—

$2,894.99

$2,505.59

—

$2,605.49

On Sale

FiTech Ultimate LS 750 HP EFI Short Cathedral Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 750 hp EFI short cathedral intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 750 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 55 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 340 or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.

Not Yet Reviewed

$2,293.99

—

$3,033.99

$2,064.59

—

$2,730.59

On Sale

FiTech Ultimate LS 750 HP EFI Short LS3 Port Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 750 hp EFI short LS3 port intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 750 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 55 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 340 or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.

Not Yet Reviewed

$2,293.99

—

$3,033.99

$2,064.59

—

$2,730.59

On Sale

FiTech Ultimate LS EFI 750 HP Fuel Injection Systems with Force Fuel

FiTech Ultimate LS EFI 750 hp fuel injection systems with Force Fuel combines incredible engineering and construction for top-of-the-line performance. FiTech fabricated many billet aluminum parts for their Ultimate LS EFI 750 hp systems, including a 92mm throttle body, high-volume fuel rails, and a 1,500 to 6,500 rpm powerband intake manifold. They combine sequential spark and fuel control with 55 lbs./hr. injectors, a plug-and-play wiring harness, and a color touch screen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. Force Fuel sump kits use your stock low-pressure manual or EFI pump to feed their sump tank. The pump is submerged in fuel for cooler and quieter running, and delivers 58 psi of high-pressure fuel to the throttle body at a rate of up to 340 lph (89 gph). For excellent performance and overall ease of operation, buy FiTech Ultimate LS EFI 750 HP fuel injection systems with Force Fuel sump system. Additional Force Fuel sump system features: * Low fuel level in the fuel tank will not result in pump starvation when vehicle is on a steep incline * Generally mounted in the engine compartment, but can be attached to the vehicle's chassis. * Supplied high-pressure hose includes 5 ft. of high-quality EFI -06 fuel line and fittings for plumbing from the Fuel Command Center 2.0 to the EFI throttle body Additional Ultimate LS features: * Optional GM transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 inches of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touch screen hand-held controller with data log features * Suction cup mounting bracket

Not Yet Reviewed

$2,457.99

—

$2,745.99

$2,212.19

—

$2,471.39

On Sale

FiTech Ultimate LS 500 HP EFI Short LS3 Port Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 500 hp EFI short LS3 port intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 500 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 92mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 36 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 255, 340, or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.

Not Yet Reviewed

$2,293.99

—

$2,745.99

$2,064.59

—

$2,471.39

On Sale

FiTech Ultimate LS 750 HP EFI Short LS7 Port Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 750 hp EFI short LS7 port intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 750 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 55 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 340 or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.

Not Yet Reviewed

$2,293.99

—

$2,745.99

$2,064.59

—

$2,471.39

On Sale

FiTech Ultimate LS 1,000 HP EFI Long Runner Cathedral Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Designed as a complete induction and EFI system for your LS engine and available with or without transmission control, FiTech offers several master kits supplied with fuel delivery systems, as well as their Go Spark LS3 performance coils to support 500, 750, or 1000 hp. FiTech Ultimate LS 1000 hp EFI long runner cathedral intake fuel injection master kits package either a 440 lph in-tank pump for tanks with a depth of 6 to 15 in. or an in-tank dual pump module (two 340 lph pumps) that is ideal for fuel cells or custom tanks. Along with the fuel delivery, kits also contain a Go Fuel regulator—Tight Fit with gauge that supports up to 1,000 hp or a FiTech High Horsepower with gauge that supports up to 2,000 hp. Both are crafted from billet aluminum and feature -6 ORB ports and a vacuum/boost port. If you wish to add a fresh jolt of energy to your LS EFI swap, you can complete these kits with FiTech Go-Spark LS coil packs. Available with or without a built-in LED that flashes when the coils fire, the coils bolt-in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade, delivering optimum output with a quality fit and reliability. Select the FiTech Ultimate LS 1000 kit for your engine with the options you prefer. FiTech Ultimate LS 1000 intake manifold kit features: * Intake manifold will fit cathedral port LS1/LS2/LS6 heads * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 80 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions

Not Yet Reviewed

$3,119.99

—

$3,572.99

$2,807.99

—

$3,215.69

On Sale

FiTech Ultimate LS 1,000 HP EFI Short LS7 Port Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, FiTech Ultimate LS EFI master kits are supplied with options for fuel delivery systems, as well as their Go Fuel regulators and Go Spark LS3 performance coils. FiTech Ultimate LS 1,000 hp EFI short LS7 port intake fuel injection master kits package either a 440 lph in-tank pump for tanks with a depth of 6 to 15 in. or an in-tank dual pump module (two 340 lph pumps) that is ideal for fuel cells or custom tanks. Along with the fuel delivery, kits also contain a Go Fuel regulator—Tight Fit with gauge that supports up to 1,000 hp or a FiTech High Horsepower with gauge that supports up to 2,000 hp. Both are crafted from billet aluminum and feature -6 ORB ports and a vacuum/boost port. If you wish to add a fresh jolt of energy to your LS EFI swap, you can complete these kits with FiTech Go-Spark LS coil packs. Available with or without a built-in LED that flashes when the coils fire, the coils bolt-in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade, delivering optimum output with a quality fit and reliability. Select the FiTech Ultimate LS 1,000 hp kit for your engine with the options you prefer. FiTech Ultimate LS 1,000 hp intake manifold kit features: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 80 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions

Not Yet Reviewed

$3,119.99

—

$3,572.99

$2,807.99

—

$3,215.69

On Sale

FiTech Go EFI 8 PA 1200 HP System Dual Pump/HP Regulator/Go-Spark Fuel Injection Master Kits

When you are getting serious about 4-digit horsepower under your hood with boost or nitrous, Go EFI 8 Power Adder 1,200 hp systems are up to the task. And, with FiTech's master kits you also get a high-pressure fuel delivery solution to take your setup from conventional to EFI. FiTech Go EFI 8 PA 1,200 hp system Dual Pump/HP regulator/Go-Spark fuel injection master kits pair powerful components designed to support serious horsepower, plus precise fuel pressure and an upgrade to high-powered sparks for improved combustion and power output. Go EFI 8 Power Adder bolt-on throttle body features eight high-flow injectors capable of fueling up to 1,200 hp. It is supplied with FiTech's Pro-tuning software and features the ability to data-log information. To ensure the best atomization of the fuel injection, the annular discharge design is increased to 20 jet streams to support the fuel volume required under boost, and has a built-in 2.5 BAR MAP sensor to handle the increased boost pressures, along with built-in timing controls based on boost or a nitrous input. The throttle body system includes handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info. Go Fuel dual fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. Go Fuel High Horsepower regulator will support 2,000 hp. Adjustable from 30 to 70 psi, this larger, dual output model is crafted from billet aluminum and features -6 ORB ports along with a vacuum/boost port. It will accept a gauge. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors.

Not Yet Reviewed

$2,395.99

$2,156.39

On Sale

FiTech Go EFI 2x4 625 HP System/Go Spark Fuel Injection Master Kits

FiTech Go EFI 2x4 625 hp system/Go-Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. In these master kits, FiTech mates their 2x4 TBIs with either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. And going a step further, the Go-Spark CDI ignition will elevate the spark for even more improved performance. Choose the master kit with your preferred fuel delivery solution. Go EFI 2x4 625 hp system lets everyone know you mean business with a pair of 4-barrels crowned atop your engine! The 2x4 is supplied with two throttle bodies, one with the brains and integral ECU, the other with the brawn. Both bodies feature four injectors and will support up to 625 horsepower (naturally aspirated). The system is supplied with two throttle bodies, handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. The throttle bodies are available in two finishes. Go-Spark produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: * Go Fuel universal in-tank pump modules—255 or 340 lph—can be used on tanks with a depth of 6 to 15 in. A feed line, vent, and return are machined into the module for easy high-pressure line connections. Gaskets, terminals, and clamps are included. * Go Fuel universal in-tank regulated pump module—255 lph or 340 lph—single line system with a depth of 6.5 to 15 in. Pump has -6 AN pressure port and a 4-Bar (58 psi) regulator and suitable for most EFI-ready tanks * Go Fuel single pump fuel cell module—returnless--340 lph--billet top assembly is machined with a 2 in. filler assembly, as well as an internal regulator to maintain 58 psi. The module is machined to fit fuel cells with a 12-bolt flange or can be installed on any tank with the supplied hardware. * Go EFI inline pump kit—255 lph external pump suitable to support engines producing up to 600 (non-aspirated) hp. Supplied with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.

Not Yet Reviewed

$2,312.99

—

$2,424.99

$2,081.69

—

$2,182.49

30 Results Found For "Billet"