Availability
Showing In Stock Items. Show All 19 Items.
On Sale
ACCEL adjustable vacuum advance canisters for GM HEI are designed to give you instant horsepower and throttle response. Adjustable vacuum advance chambers permit infinite settings for both the amount and rate of advance. The advance chambers include an adjustment wrench and an instruction guide. To optimize your engine's timing curve, you need ACCEL adjustable vacuum advance chambers for GM HEI.
( 22 )
$52.69
$47.45
On Sale
Looking for a good cap and rotor for your HEI distributor? These Pertronix caps and rotors are made from a high-dielectric, 60 kV-rated alkyd molding compound to minimize crossfire and "arc-thru." They include nylon rotor hold-down screws, a low-resistance coil brush for a more efficient spark, and brass terminals for a long life.
( 11 )
$46.15
$41.54
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$49.95
—
$61.69
$33.93
—
$49.05
On Sale
Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .
( 197 )
$53.75
—
$57.49
$48.35
—
$51.75
On Sale
Your distributor will need upkeep to run at top performance. MSD Street Fire cap and rotor kits can help maintain its optimum operation. Manufactured with brass terminals and a heavy-duty rotor, these MSD kits offer big performance at a not-so-big price. MSD Street Fire cap and rotor kits are available for several GM and Ford applications. So, if you're in a budget frame of mind, choose quality-built MSD Street Fire cap and rotor kits.
( 138 )
$47.77
—
$52.69
$42.99
—
$47.45
On Sale
ACCEL performance distributor cap and rotor kits offer superior protection from damaging misfires. High-output racing ignition systems place severe demands on these components, and that's why ACCEL makes sure these kits provide optimal shielding against damage. The ACCEL performance distributor cap and rotor kit designed for your application will defend your parts against high voltage, surges of spark current, and high temperatures, all of which can liquify run-of-the-mill cap and rotor's molded parts! More product features include: * High-quality compound caps ensure stability * Corrosion-resistant inserts help provide high-sparking energy flow
( 70 )
$45.98
—
$53.09
$29.20
—
$46.55
On Sale
These MSD advance kits are the same kits that come with your MSD distributor. The kits include the needed components to make your distributor perform like it did when it was brand new.
( 133 )
$53.05
$47.75
On Sale
ACCEL heavy-duty distributor cap and rotor kits offer superior protection from "arc-thru" and crossfire. These caps are stress-relieved at the molding to ensure stability and feature a 60k volt-rated alkyd molding compound. Corrosion-resistant brass inserts and steel rotor springs provide high-spark energy flow for the ACCEL heavy-duty distributor cap and rotor kit designed to fit your application.
( 44 )
$52.69
—
$59.25
$34.25
—
$53.35
On Sale
ACCEL distributor caps are the best way to help improve ignition. The compression-molded caps are stress-relieved immediately after molding to ensure stability of the 60,000 V alkyd high-performance compound. Brass inserts provide for high spark energy flow. These heavy-duty ACCEL distributor caps provide maximum energy to your engine. They're available in a variety of styles for a wide range of vehicle application.
( 49 )
$32.85
$29.57
On Sale
These MSD vacuum advance mechanisms are designed to replace the vacuum advance chamber on the MSD HEI distributor. They are made of steel and feature cadmium plating for maximum durability.
( 7 )
$39.50
$35.55
On Sale
MSD replacement plug wire boot and terminal kits are perfect for enthusiasts who build their own wire sets or need to replace damaged boots. The boots are made from a high-temperature silicone compound and feature a gray finish. The terminals have large crimp tabs to grasp the wire, and wide contacts to grip the distributor cap receptacle.
( 103 )
$41.78
$37.60
On Sale
Simplify your ignition system installation. MSD replacement coil wires are used when attaching an MSD Blaster coil to an their HEI dust cover or distributor. The pre-assembled wires include two 90 degree boots and two dual crimp terminals.
( 96 )
$29.81
—
$32.91
$26.83
—
$29.62
On Sale
MSD designed these firewall feed-thrus to prevent voltage leaks in passenger compartment mounted coil applications. Made from Rynite and nylon, they provide a 1/2 in. of insulation to ensure that the coil's spark reaches the distributor. They mount in a 1 in. diameter hole directly to the firewall and have high tension towers on each side, connected through a brass rod for full spark transfer.
( 26 )
$29.83
$26.85
On Sale
Taylor coil wire kits include all of the terminals, boots, and spark plug wire you need to hook up just about any ignition coil. They include both male and female terminals for the distributor end, as well as for the coil attachment.
( 93 )
$24.90
$22.41
On Sale
Taylor High-Energy spark plug wire sets are an outstanding choice for replacement or a performance upgrade. These wires feature heat-resistant silicone jackets and boots, double spring-locking spark plug terminals for better gripping, an 8mm size for high-compression engines, and a resistor core to suppress radio interference. The spark plug wires can withstand temperatures of up to 500 degrees F—and they're available in a variety of options for distributor terminal and boot ends, assembled or not, and universal or direct-fit for specific applications.
( 222 )
$62.90
$56.61
On Sale
Increase your spark energy delivery with ACCEL SuperStock 3000 Series spark plug wire sets. They provide a performance upgrade for your OE-style wires without breaking the bank, and ACCEL offers several models to match your application. Meet or exceed OE resistance requirements economically with SuperStock 3000 Series spark plug wire kits!
( 6 )
$57.69
$37.50
On Sale
Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.
( 82 )
$33.97
$30.57
On Sale
These spark plug and coil wire repair kits from Taylor are easy replacements for damaged individual wires. They're available for an assortment of wire types in a variety of colors and sizes to suit your application.
( 22 )
$22.80
$20.52
On Sale
ACCEL universal single wire replacement kits are great for that one wire that got cut, burned, or broken. Each kit includes a 60 in. long, 8mm carbon/graphite core with boots and terminals for 90 degree male, 90 degree female, and straight points female towers. Service your spark plug wires with ACCEL.
( 7 )
$24.38
$21.94
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
