Availability
Showing In Stock Items. Show All 19 Items.
On Sale
Properly jetting a nitrous system cannot be overemphasized! To fine-tune the power level properly, you'll want to have some of these NOS funnel jets on hand. They are manufactured from stainless steel and available in a wide variety of sizes, to make sure your nitrous system is tuned properly.
Not Yet Reviewed
$54.29
$29.86
On Sale
TH-700-R4 transmissions are controlled by an adjustable throttle valve (TV) cable that attaches to the carburetor or injector linkage with a special bracket. The cable regulates internal line pressure, shift points, and downshifts, so proper installation and adjustment is critical. These JET TV cable brackets fit most popular carburetors and TBI units for TH-700-R4 Conversions. These brackets are designed to work with GM factory cables.
( 22 )
$59.96
$53.96
On Sale
Are you looking to upgrade your Quadrajet carburetor's choke from a heat tube style to an electric unit? If so, then these Jet electric choke conversion kits are exactly what you need. These kits include an electric choke thermostat, choke hold-downs, a drill bit, tap, and all other necessary hardware and electrical connectors to make for a complete installation. Get more convenience and reliability from your Quadrajet with these Jet electric choke conversion kits.
( 19 )
$52.46
$47.21
On Sale
Restore lost horsepower caused by vacuum leaks or worn-out parts with one of these JET carburetor rebuild kits. Your carb regulates the precise amount of fuel and air to maximize engine performance, but sealing components need to be updated periodically. JET rebuild kits are available for a variety of carburetors, such as Holley, Quadrajet, and Rochester, and they include all parts needed for your specific make/model--gaskets, seals, O-rings, needle and seat assemblies, and accelerator pumps. Find the rebuild kit to match your carburetor specs, and experience the efficiency upgrade of JET Performance.
( 14 )
$46.46
—
$51.71
$41.81
—
$46.54
On Sale
Quadrajet carburetor electric choke thermostats from Jet Performance are replacement only. These quality components are designed to fit all Quadrajets that came with an electric choke, including the Jet Quadrajet carburetor models with an electric choke (35001, 35002, 36001, and 36002).
( 13 )
$32.21
$28.99
On Sale
These JET Quadrajet metering rods install into your Rochester Quadrajet carburetor without any modifications. They are available in different sizes to allow for all engine types. Optimize your carburetor's flow with JET Quadrajet metering rods.
( 2 )
$27.71
$24.94
On Sale
JET TBI fuel regulator diaphragms are individual extra-strength replacements. They can be used with the stock regulator housing as a heavy-duty upgrade or with the JET TBI adjustable fuel pressure regulator to gain maximum efficiency. Replace leaking fuel regulator diaphragms with robust substitutes from JET.
( 1 )
$50.21
$45.19
On Sale
JET Quadrajet M4 series adjustable part throttle kits provide everything necessary for you to have easy access to the adjustable part throttle feature in your Rochester Quadrajet carburetor. They take approximately 30 minutes to install and allow you to adjust the part throttle setting on the primary metering rods. This can eliminate part throttle flat spots and off-the-line hesitation by simply turning a screw. The best part is, you don't have to take apart the carburetor every time you want to adjust the part throttle.
( 8 )
$29.96
$26.96
On Sale
JET Powr-Flo inline fuel filter elements will protect your fuel system with maximum filtration. These replacements are for high-flow fuel filters and are offered in a10 micron cellulose for finest filtration, and a cleanable 100 micron stainless steel version for larger particle filtration. The cellulose elements are for use after the fuel pump, and the stainless steel are for use between the tank and the fuel pump. Feed your engine clean fuel pumped through Powr-Flo inline fuel filter elements by JET.
( 1 )
$23.96
—
$26.21
$21.56
—
$23.59
On Sale
Mount your high-flow fuel filter in the beauty of JET Performance billet brackets. These lightweight brackets are machined from billet aluminum for strength and durability while also providing some additional visual appeal.
Not Yet Reviewed
$52.46
$47.21
On Sale
For easier jet changes, Quick Fuel offers their jet change gasket kits. These carburetor gasket kits are available in various kit applications to better suit your specific needs. Each kit includes bowl gaskets, metering block gaskets, and bowl screw gaskets to easily service your carburetor.
( 8 )
$31.79
$28.61
On Sale
Holley carburetor float kits work with side-hung and center-hung Demon and aftermarket Holley carburetor floats, as well as many OE Holley, Ford, Chrysler, GM, Motorcraft, AMC, and Rochester marine carburetors. Offered in brass and Nitrophyl for internally and externally adjustable floats, they're available as primary floats, secondary floats, and secondary floats with notches that include jet extensions. Holley's wedged floats feature a reinforced float bracket assembly that allows more fuel to flow through the bracket—especially when using bottom-feed needles and seats. Technical notes for Holley carburetor float kits: * Wedged floats are designed for oval track use, so the float stays open in turns * The use of brass floats on the secondary side of Model 4160 carburetors factory-equipped with Nitrophyl floats may result in loss of fuel control and flooding if the floats contact the metering plate * You should only install jet extensions and notched floats in rear fuel bowls
( 108 )
$29.69
—
$49.95
$26.72
—
$44.95
On Sale
Holley fuel bowl gaskets are designed to replace your standard fuel bowl gaskets. They transform jet changing into an easy process with no worries of ripped gaskets.
( 90 )
$25.42
$22.88
On Sale
NOS fan spray nozzles are designed to be used as independent nozzles for both nitrous and fuel, where installation restrictions might make Fogger nozzles impractical. Fan spray nozzles are fully adjustable with a simple jet change, and feature injection at a 90 degree angle. These aluminum nozzles are available in a variety of anodized colors.
( 5 )
$29.49
$26.54
On Sale
These Quick Fuel carburetor fuel bowl gaskets are designed to replace your standard fuel bowl gaskets. They are manufactured from quality materials and feature a non-stick coating to transform jet changing into an easy process with no worries of ripped gaskets. Available for all Quick Fuel or Holley performance carburetors, the Quick Fuel carburetor fuel bowl gaskets will make sure that the fuel stays where it belongs.
( 19 )
$49.95
$44.95
On Sale
Quadboss carburetor repair kits provide all the parts needed to repair your machine's carburetor at a fraction of the cost of OEM. Each kit contains all the necessary gaskets, O-rings, float valve assembly or float needle, and jets to repair one OEM carburetor body. Features: * Nitrile rubber material is used on all O-rings and rubber gaskets * High performance interface gasket material is used for all paper gasket applications * OEM jet sizes are included * For machines with two carburetors, the kit will contain all necessary components to repair both carburetors
( 2 )
$22.58
—
$59.16
$20.32
—
$53.24
On Sale
These K&N powersports performance air filters are ideal for extended use in dirty and dusty off-road riding and provide clean carburetion, even at high altitudes. As a rule, no jet changes are required with just a K&N filter element. K&N powersports performance air filters are washable and reusable and provide for high airflow with excellent filtration.
( 86 )
$52.99
$42.39
On Sale
Scott Drake's economy-priced air cleaner elements will complete your high performance air cleaner assembly. Scott Drake uses a molded design on the top and bottom of the element and a crisscross pattern on the outer shell.
( 42 )
$30.89
$27.80
On Sale
Holley carburetor fuel inlet filters are moraine-type fuel inlet filters that fit Holley 4-barrel street carburetors with center-hung float bowls or square bowls. They are also great stock replacements for some original equipment carburetors.
( 25 )
$25.42
$22.88
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
