Free Shipping on Orders Over $109 at Summit Racing

On Sale

Holley Complete TKX or TKO Transmission Installation Kits

Holley transmission installation kits come complete with everything you need to bolt a TKX or TKO transmission to a 28- or 50-ounce externally balanced small-block Ford engine (depending on kit selected). Built with a mixture of best brands (such as Lakewood, Hays, and Mr. Gasket), the kits include: a roller pilot bearing, bellhousing with dust shield, billet steel flywheel, clutch and pressure plate, hydraulic release bearing, and all hardware needed to install these components. Additional features and notes: * Lightweight cast aluminum bellhousing and steel block plate provide a factory-like installation and appearance * Billet steel, 24.5 lb., 157-tooth externally balanced flywheel for light weight and strength * 26-spline, 10.5 in. clutch disc offers superior clamping force for engines up to 500 hp * Roller-style pilot bearing offers improved shifting by reducing parasitic drag and transmission wear * Adjustable Hydraulic Release Bearing offers reduced pedal effort and easy installation * Works with OE or MSD high-torque starters * All hardware included

3.5 out of 5 stars ( 2 )

$1,849.95

$1,663.95

On Sale

MSD Direct Ignition Systems

The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition

4.0 out of 5 stars ( 5 )

$1,799.95

—

$2,049.95

$1,618.95

—

$1,843.95

On Sale

Baer Brakes 6T Front Brake Kits

Baer Brakes 6T front brake kits feature the 6-piston 6T caliper mounted to a 13.5 in., 1-piece slotted and zinc-plated rotor. The 6T calipers are D.O.T complaint, with dust and weather seals, and use the popular D1247 style pads. Rotors are purpose-cast using only premium materials and feature a curved vane design for optimum cooling, consistent braking, and reduced brake fade. All mounting brackets, stainless braided hoses, and hardware are included. These front brake kits are available for hundreds of applications, including countless Chevrolet, Ford, Toyota, Cadillac, GMC, and Jeep models. Select the caliper color you prefer.

Not Yet Reviewed

$1,849.95

—

$2,199.95

$1,663.95

—

$1,978.95

On Sale

Racepak IQ3D Drag Racing Digital Dash Recorders

Attention sportsman drag racers: Racepak IQ3D digital dash instruments offer a compact, all-in-one solution for data acquisition. Adding a robust, built-in data logger to the popular IQ3, the drag race versions display information on four user-definable pages—and recorded data is stored on a microSD memory card located on the face of the dash for easy access. You can record engine rpm, driveshaft rpm, oil pressure, water temperature, and battery voltage. Smarter racing; get onboard performance that could change the way you compete ... and win, with Racepak IQ3D. Racepak IQ3D drag racing digital dashes specifications include: * Programmable LED shift lights * User-defined 5-character sensor input names * Four programmable external warnings * Shielded, low-luster display for open cockpit use * Can add up to six additional V-Net channels

5.0 out of 5 stars ( 1 )

$1,849.95

$1,663.95

On Sale

Baer Brakes Pro Brake Kits

You may have to slow down in a hurry—and if your vehicle is carrying tons of weight, it's not always easy to attain the greatest braking performance. That's where Baer Pro brake kits come in. Designed as direct bolt-on systems pre-loaded with ceramic brake pads, they feature slotted, drilled, and zinc plated rotors—and the calipers have dust and weather seals. Baer Pro brake kits are suitable for virtually any level of performance, on the street or track. Find the front and/or rear system compatible with your vehicle.

5.0 out of 5 stars ( 1 )

$1,849.95

—

$2,199.95

$1,663.95

—

$1,978.95

On Sale

Summit Bucks

Mishimoto Performance Air Intakes

Mishimoto performance air intakes are engineered to be a direct-fit for your vehicle and an excellent upgrade to replace the stock air box. They're guaranteed to boost your automobile's torque and horsepower, and feature Mishimoto's lifetime warranty. The aluminum or silicone tubes are available in a variety of finishes; and an efficient cotton gauze filter is included. Order the model designed for fitment on your vehicle application.

5.0 out of 5 stars ( 1 )

$1,999.95

$1,959.60

On Sale

Tuff Country EZ-Ride Suspension Lift Kits

Tuff Country EZ-Ride suspension lift kits increase fender clearance and allow for larger tires, while their EZ-Ride technology maintains a great ride. All Tuff Country EZ-Ride lift kits are of the finest quality and are engineered for simple installation at an affordable price. Most kits bolt-on, require no cutting or drilling, and are available for a wide range of vehicles in a choice of lift heights. New shocks are not required on most installations. Features of Tuff Country EZ-Ride suspension lift kits, depending on the application, may include: * Spacers mounted above the OEM coil springs/struts * Rear add-a-leafs added to the existing leaf springs * Rear cast iron lift blocks mounted below the OE leaf springs * Re-indexed factory torsion bars--without "cranking up" * Control arms that retain proper suspension geometry * Control arms with PTFE-lined FK Uni-ball joints * Dropped pitman arm and/or track bar relocating bracket(s) for proper alignment * Extended radius arms to improve articulation * Replacement radius arms that eliminate the need to drop radius arms--with no loss of ground clearance * Axle pivot brackets with camber adjustment * Transfer case drop kit * Polyurethane spring bushings * PTFE pads in leaf springs to eliminate squeaking * Tapered, snub-rolled, and pre-set leaf springs * Application-specific hardware and U-bolts

4.1 out of 5 stars ( 72 )

$1,670.99

—

$2,216.99

$1,503.89

—

$1,995.29

On Sale

Tuff Country Lift Kits

Tuff Country lift kits are designed to add additional height to your truck or SUV to increase fender clearance and allow for larger tires. Available in a wide variety of lift sizes and types, Tuff Country lift kits are trademarked with quality engineering and materials, affordable pricing, and simple installation finished with a great ride. Whether you are looking to lift a little or a lot, Tuff Country will give your vehicle the height and stance you've been wanting.

3.75 out of 5 stars ( 4 )

$1,668.99

—

$2,211.99

$1,502.09

—

$1,990.79

On Sale

Tuff Country Performance Lift Kits

Get additional tire clearance to fit larger tires and a cool new look with one of these Tuff Country performance lift kits. These suspension lift kits are engineered to give the highest quality and best value, and kits that include extended radius arm offer better suspension articulation and additional tire clearance. Front coil springs and rear add-a-leaf's are used to lift your vehicle, while radius arm drop brackets, axle pivot brackets (with camber adjustment bolts) and sway bar drops keeps everything proper aligned. A camber adjustment bolt allows for adjustment for your vehicle application to provide a precise front end alignment and better tire wear. Nobody ever said that suspension modifications where a piece of cake. Tuff Country engineers designed their suspension kits with ease of installation—a key factor in the design. Get a big boost in your ride profile and handling with Tuff Country performance suspension lift kits. They're the best way to give your rig maximum height, clearance, and attitude. Choose the Tuff Country performance lift kit for your application needs. Product features ad highlights: * Gain additional tire clearance * Axle pivot brackets includes camber adjustment bolts for precise alignment * Shocks are sold separately unless otherwise noted * Kits with extended radius arms allows for better suspension articulation * EZ-Ride front coil springs

3.0 out of 5 stars ( 3 )

$1,702.99

$1,532.69

On Sale

aFe Control Sway-A-Way Coilover Shocks

The aFe Control Sway-A-Way coilover shocks are designed with race-winning technology, offering better damping curves for rough terrain but maintain comfort and control on the street. The coilover shocks feature zinc plated and steel cylinder bodies with clearcoat for exceptional corrosion resistance. They also feature specifically formulated, fully synthetic shock oil and a multi-seal carrier to ensure zero leakage. A special truncated thread design allows for removal of the included coilover hardware without having to completely disassemble the entire shock. Upgrade your daily driver with aFe Control Sway-A-Way coilover shocks. They offer high-performance suspension features from the off-road racing world for a significant upgrade in capability and style. Select the Sway-A-Way coilover shocks designed for your application needs. Key benefits and features: * 20-plus years of research/development and testing in nearly all vehicle types * High-quality construction—uses CNC-machined aluminum components and multi-seal carriers for zero leakage, built to strict tolerances * Superior durability—the coilover shocks have features like bright zinc-plated steel bodies to resist corrosion, while 7/8-inch polished Nitro Steel shafts handle impacts, ensuring longevity * Red anodized, CNC-machined aluminum components are made to the strictest tolerances * Consistent performance—synthetic shock oil and remote reservoirs (on some models) increase fluid capacity, reducing heat and preventing shock fade during hard use * Engineered as a direct replacement for specific vehicles, requiring no cutting, drilling, or permanent modifications

Not Yet Reviewed

$1,606.00

—

$1,852.00

$1,525.70

—

$1,759.40

On Sale

Tuff Country EZ-Flex Suspension Lift Kits

Tuff Country EZ-Flex suspension lift kits include EZ-Ride leaf springs or coil springs that offer the ultimate in lifted spring ride quality, while remaining extremely durable for off-road situations. EZ-Flex control arms allow for increased articulation in extreme conditions.

4.33 out of 5 stars ( 3 )

$1,737.99

—

$1,748.99

$1,564.19

—

$1,574.09

On Sale

AEM Electronics CD-7 Digital Racing Dash Displays

AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and with sunlight-readable displays. To ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-bright LEDs span the top of the display housing for rpm and shift light indication. You can program them to ascend in specific increments based on rpm range, and flash when it's time to shift. Brightness is also programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting—even with driving gloves on. These button functions are duplicated on the rear connector, allowing you to mount remote buttons on the steering wheel, if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. AEM offers the CD-7 as "display only" (non-logging) or with built-in logger (CD-7L). The units are available in either a cast aluminum or carbon fiber composite housing—with sealed connectors on the rear and anti-vibration mounts.

3.0 out of 5 stars ( 2 )

$1,699.95

—

$2,151.95

$1,528.95

—

$1,935.95

On Sale

aFe Control Sway-A-Way Shocks

aFe Control Sway-A-Way shocks offer a direct fit to high performance. They feature race-winning engineering components that have 20-plus years of testing tucked into a specifically designed kit that will bolt directly into your daily-driven vehicle. These aFe Sway-A-Way kits deliver adjustable ride height and better off-road damping curves without sacrificing any on-road comfort or handling. They are 100 percent designed and built with bright zinc plated steel cylinder bodies and CNC-machined aluminum components made to strictest tolerances. These aFe Control shocks require no modifications, and are completely adjustable and rebuildable. They include a spanner wrench for you to adjust your ride height to find your perfect blend of performance and style.

4.0 out of 5 stars ( 1 )

$1,852.00

$1,759.40

On Sale

aFe Sway-A-Way Coilover Kits

aFe Sway-A-Away coilover kits offer adjustable ride height and superior off-road damping curves without sacrificing any on road comfort or handling. The sway-a-way high performance replacement coilovers feature all the same race winning engineering components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. The coilovers feature bright zinc plated steel cylinder bodies and are accented by CNC-machined, red anodized aluminum components. aFe's Sway-A-Way coilover kits come pre-set for 2 in. to 2.5 in. of lift and includes a spanner wrench to allow you to adjust your ride height to find your perfect blend of performance and style. aFe Sway-A-Way coilover kit features: * CNC-machined components are made to the strictest tolerances * Polished nitro steel shafts for strength and durability * Shock provide increased damping * Multi-seal carrier to ensure zero leakage * Remote reservoir with mounting brackets * Specifically formulated 7W fully synthetic shock oil * Completely adjustable and rebuildable using simple tools * Direct-fit installation, requires no modifications

Not Yet Reviewed

$1,852.00

$1,759.40

On Sale

Tuff Country Heavy-Duty Lift Kits

Get a big boost in your ride profile and handling with one of these Tuff Country heavy-duty suspension lift kits. They're the best way to give your rig maximum height, maximum clearance, and maximum attitude. Additionally, each Tuff Country heavy-duty lift kit is specially created for the greatest outcomes. Tuff Country uses premium "EZ Ride" leaf or coil springs. Under heavy use, this provides the best handling and control without sacrificing ride quality. For the most comfortable ride, each lift-arched leaf spring is tapered, snub rolled, and set, and are also shot-peened, set, and powdercoated for longer life and height maintenance. All brackets are laser-cut using computer guidance to provide the best quality and simplest installation. Each Tuff Country kit is designed to give you what you need to accomplish your lift project with success. Choose the Tuff Country heavy-duty lift kit designed for your application needs. Product highlights: * Featuring EZ-Ride Technology for the best ride * Replace worn-out front and rear springs with EZ-Ride leaf springs * Kits are also available for purchase with rear springs or rear cast iron blocks * PTFE pads used in leaf springs to eliminate squeaking * Leaf springs are tapered, snub rolled and pre-set * Shocks are sold separately unless otherwise noted * Limited lifetime manufacturer warranty on leaf spring sew

Not Yet Reviewed

$1,706.99

—

$2,064.96

$1,536.29

—

$1,858.46

On Sale

Racepak IQ3SL Street Logger Dash Recorders

Racepak IQ3SL Street Logger dash recorders add data-logging to the popular IQ3S Street display dash. These add-on data acquisition accessories make an ideal solution for vehicles that need full road instrumentation, as well as the ability to record data—combining all functions into one easy-to-use unit! Standard data—such as speed, odometer, turn signals, hi/low beam and parking brake indicators—are displayed, along with programmable shift and warning lights. In addition, these dash recorders feature internal processing to read data from OBDII and most aftermarket ECU and EFI systems. This makes the IQ3SL Street Logger a great option for modern cars or vehicles with modern EFI engine swaps. Racepak IQ3SL Street Logger dash recorder features include: * Displays standard road functions * User-defined shift light output * Displays up to 28 inputs via four page * Shielded, low-luster display for better sunlight viewing * Blue dimmable backlight * Metric and English capable * Gear Indicator * CAN-based and OBDII compatible (adapter cables available) * Four user-defined alarms * Connects to any Racepak V-Net data logger * User-defined 5-character sensor input names * Optional GPS module for speed

Not Yet Reviewed

$1,749.95

$1,573.95

On Sale

Holley Sniper EFI BBD Master Kits

Holley Sniper EFI BBD master kits will be right at home on any powered trail rig or weekend cruiser. Not only does the Sniper EFI BBD offer superior throttle response and WOT power over the carburetor, but you can also gain timing control! Put an end to cold start issues, hesitations, vapor lock, and flooding—upgrade to Holley Sniper EFI. Features include: * Bolt-on BBD carburetor replacement * Engineered specifically for 1971-86 Jeep CJs with 258 cu. in. 6-cylinder engines * Throttle body-mounted ECU--no extra boxes to mount * Supports up to 350 hp with two 100 lbs./hr. injectors * Only four wiring connections required—Battery +, Battery -, Switched ignition, and rpm * Internal fuel pressure regulator eliminates the hassle of plumbing an external regulator * Includes complete fuel system: 20 ft. of 3/8 in. vapor guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank * High-resolution full color touch screen for initial setup, tuning, and gauge displays * Simple calibration wizard: answer a few questions about your engine and it creates the base map, then starts tuning on its own—no laptop required! * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC and fuel pressure regulator, for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust; ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and stainless steel (weldable) oxygen sensor flange * Available in Classic Gold, black, shiny polished

4.4 out of 5 stars ( 10 )

$1,699.95

$1,528.95

On Sale

Holley EFI 8-Channel CAN EGT Kits

Introducing the Holley EFI 8-Channel CANBus EGT kits, for Holley EFI! Exhaus/Gas/Temperature data is critical information when your engine tune up is on the ragged edge. Knowing the exhaust temperature of each cylinder can help you identify potential horsepower left on the table, or pin point any weak links in your max effort race engine. You can also use this data to as identify a potential ignition misfire, or stuck injector! The included sensors are designed to work with any engine combination, with an open reinforced tip for the fastest response rate, and improved shielding. The EGT probes come in different lengths ensuring a clean looking installation. The included stainless steel bungs feature a built-in step, making installation as easy as possible! Kit features: * Compatible with HP or Dominator EFI, and Terminator X EFI * Plug-and-Play 8-Channel CAN EGT module, for quick and easy installation * High-quality 1/4 in. stepped stainless steel EGT weld bungs * Robust 1/4 in. EGT probes, designed to withstand the extreme cylinder pressures * 4 ft. CAN extension harness * Analog output wires, to be used with non-Holley EFI installations * Requires V5 build 100 or newer software/firmware

5.0 out of 5 stars ( 1 )

$1,749.95

$1,573.95

On Sale

Holley HP EFI ECU and Harness Kits

Holley HP EFI ECU and harness kits allow you to manage automotive functions—like the fuel and ignition of your engine, along with controlling nitrous, boost, or water/methanol. Select the model with options needed for your vehicle application. (Note: some models are engine-specific.) Features and notes: * Eight sequentially driven 8:2 peak and hold injector drivers capable of driving up to 16 low or high-impedance injectors are standard * 8-channel distributorless ignition (DIS) outputs capable of directly driving "smart" ignition coils or Holley DIS coils * Integrated, single-channel wideband oxygen sensor control. Works with NTK or Bosch sensors. More channels can be added via CAN bus. * Internal data-logging is standard, with a huge 2GB of memory * 4-stage progressive nitrous control * Turbo boost control * Integrated water/methanol injection control * Self-tuning fuel table strategy greatly simplifies tuning process * Individual cylinder fuel and spark control allow you to unlock your engine's potential * Compatible with 4, 6, and 8-cylinder engines * Unique lbs./hr.-based fueling strategy greatly simplifies tuning * Advanced idle, closed loop, and enrichment strategies allow for very stable operation * Fully potted and can be mounted in the engine compartment or interior * Sealed automotive and marine-grade connectors * Allows for use of common OEM sensors, as well as customer sensor calibration input * Ignition plug-and-play with GM 24x and 58x LSx engines, GM HEI, Ford TFI, magnetic, and hall effect trigger, and other ignition systems * 1-5 bar MAP sensor capability * 2-channel knock control sensor inputs for both one and 2-wire knock sensors * Dedicated fuel and oil pressure inputs * Control both stepper and PWM idle air control (IAC) motors * Speed density, Alpha-N, or combination fueling strategies * Four programmable high or low pulse width modulated (PWM) outputs and four fully configurable inputs can be configured for use * Lean or rich safety cutoff

4.44 out of 5 stars ( 25 )

$2,049.95

$1,843.95

On Sale

Racepak V300SD Easy Access Data Logger Kits

The new Racepak V300SD Easy Access Data Loggers include all the features and benefits of their successors, but now also include built-in pre-configured data analysis channels, enabling you to make quick decisions based on real data between rounds at the track. Equipped with a door car harness, these units are commonly used for Pro Stock, Pro Modified, Sportsman drag classes, and Land Speed. They come with DataLink software. Easy Access loggers no longer require the use of a security key, allowing you to look at your data with any laptop that has the latest version of Datalink V5 installed. * Out-of-the-Box, this system will data log: - Engine RPM - Drive Shaft RPM (Requires driveshaft collar, sold separately) - Accelerometer G-Meter - Lateral G-Meter - Battery Voltage * List of pre-configured data analysis math channels included in the DataLink V5 software: - Engine vs. Driveshaft Ratio - Clutch percentage slip - Clutch Slip Ratio - Trans Ratio - RR, LR, RF, LF Shock Velocity - Average Air/Fuel Ratio - Average Exhaust Gas Temperatures - CC's Per Turn (for Fuel Flow) - Track Time - G-Meter MPH, G-Meter Distance (Feet) - 60 ft., 330 ft., 660 ft., 1000 ft., 1320 ft. Clock Markers Features: * With sampling rates of up to 1,000 frames per second, the V300SD series of data recorders allow you to monitor up to 83 channels of sensor information * Unlocked math channels for the following calculations: Clutch Percentage Slip, Trans Ratio, Shock Velocity, Average AFR (Air/Fuel Ratio), Average EGT (Exhaust Gas Temperature), G-Meter MPH, and many more * The included SD memory card allows you to transfer your vital sensor information to your laptop quickly, getting you back in the lanes without fumbling with cables * The 83 total channels break down as follows: 72 V-Net; 4 Hard-wired Analog; 4 Hard-wired Digital; and 3 Internal Sensors (Battery Voltage, Accel/Decel G-Meter, and Lateral G-Meter)

Not Yet Reviewed

$1,799.95

$1,618.95

On Sale

Racepak SmartWire Kits

Racepak SmartWire kits are fully programmable power distribution modules, capable of controlling 30 outputs (on/off switching) and 12 inputs (switch-activated) on any type of 12–16 VAC systems. Fuses, relays, and solenoids are eliminated, instead controlled through solid-state switching inside the housing. Current outputs and switching inputs—along with a nearly unlimited variety of on-off switching functions—are user-programmable through the Racepak DataLink II software. Racepak SmartWire kits can operate in three different modes: * Stand Alone: Power from the battery is connected to the power stud of the SmartWire. Outputs to each device in the vehicle are connected to one of two 15-pin connectors; output currents and related requirements are programmed via connection of the SmartWire to the user's PC. Switching off and on of the devices is handled through inputs on the 15-pin connectors or optional SwitchPanel or SwitchModule. * In conjunction with Racepak V-Net sensors: Want to automatically turn on a radiator fan, but only when the water temperature is above 190 degrees? Add a Racepak V-Net water temperature sensor to the vehicle, connect it to the V-Net port of the SmartWire, and program it through use of a PC connected to the SmartWire. * In conjunction with a Racepak V-Net data logger: This allows the SmartWire to be connected to the single V-Net T cable, which transmits all sensor data to the data logger. They "borrow" the sensor data to trigger devices based on desired programmed settings. In addition, all states and conditions of each channel can now be monitored and recorded in the DataLink II software, alongside all the other sensor data.

Not Yet Reviewed

$1,749.95

$1,573.95

On Sale

FiTech Ultimate LS 500 HP EFI Short Cathedral Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 500 hp EFI short cathedral intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 500 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 92mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 36 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 255, 340, or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.

Not Yet Reviewed

$2,007.99

—

$2,109.99

$1,807.19

—

$1,898.99

On Sale

ICON Elite Forged Piston and Ring Kits

If you are looking to step your engine program up to the next level, ICON Elite forged pistons and ring kits have exactly what you are looking for. Made exclusively from 2618 aluminum, the Elite Series pistons are purpose built from top to bottom to perform consistently in extreme conditions. ICON's Elite forged pistons feature their Line2Line adaptive skirt technology coating that reduces friction between the piston and cylinder wall, while providing additional protection at start-up. They come standard with an anodized top ring groove to greatly reduce micro-welding that can occur under detonation conditions, and an anodized piston crown to help focus the heat in the piston crown and improve combustion efficiency. ICON Elite forged piston and ring kits include pistons and ring stack. Select the Elite kit designed for your build. Additional features: * Upgraded wrist pin * Mini grooves * CNC-machined valve reliefs and crown * Diamond CNC-turned skirts * Accumulator groove * Dual forced pin oiling * Lateral gas ports on high-compression designs * Spacer rings provided for shorter compression height pistons

Not Yet Reviewed

$1,668.64

$1,501.78

On Sale

FiTech Ultimate LS 500 HP EFI Short LS7 Port Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, the Ultimate LS EFI intake is paired with fuel delivery options, creating FiTech master kits. FiTech Ultimate LS 500 hp EFI short LS7 port intake fuel injection master kits are offered with an inline pump kit, in-tank pump modules, or a Force Fuel system. The kits are enhanced further with a Go Fuel regulator and/or Go-Spark LS3 coils. Choose the kit with the options you prefer for your swap. FiTech Ultimate LS 500 hp intake manifolds feature: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 92mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 36 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions Fuel delivery options: * Inline pump kit is supplied with FiTech's heavy-duty 255 lph external fuel pump that is suitable to support engines producing up to 600 (NA) hp. The kit includes 40 ft. of high-pressure fuel hose, two fuel filters including a serviceable 10-micron filter, fittings, mounts, and clamps. * In-tank pump modules: -- 255, 340, or 440lph universal pump module for tanks with a depth of 6 to 15 in., billet top assembly with strategically placed supply, return, and vent ports to help route fuel lines easily. Gaskets terminals, and clamps are included. -- 340 lph regulated fuel pump module, single line system with h -6 AN pressure port and a 4-bar (58 psi) regulator that will fit most EFI-ready tanks. -- 340 lph return-less pump module that will support up to 800 hp and supplied with an internal regulator to maintain 58 psi. * Force Fuel system mounts under the hood and is fed with the original mechanical or electric fuel pump then supplies the EFI system with the required high pressure using an internal 340 lph pump. The reservoir holds a 1/2 gallon of fuel to prevent fuel starvation and a serviceable 10-micron fuel filter is included. Go Fuel Tight Fit regulator can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum, features -6 ORB ports along with a vacuum/boost port, and includes gauge. The Go-Spark LS3-style coils bolt in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade. They are available with or without a built-in LED that flashes when the coils are firing.

Not Yet Reviewed

$2,093.99

—

$2,194.99

$1,884.59

—

$1,975.49

108 Results Found For "Kit"